• 한국입자에어로졸학회지
• /
• 제18권3호
• /
• pp.61-68
• /
• 2022

In this study, a fluidized bed particle generator was developed to generate an aerosol without supply of compressed air and to increase portability. It was assumed that the mixing ratio of the test particles and beads, the input amount, and the air flow rate supplied to the generator would have effect on the aerosol generation characteristics. The product of these three parameters was set as a characteristic parameter and particle generation characteristics according to the change of the characteristic parameter were observed. As a result, it was confirmed that the input amount of test particles and beads was not suitable as a characteristic parameter and a characteristic parameter expressed as a product of the mass mixing ratio and the air flowrate was newly defined. When the new characteristic parameter is applied, it can be confirmed that the total amount of particles generated from the particle generator is a function of the characteristic parameter. As a result of measuring the amount of particle generation by adjusting the characteristic parameter, it was confirmed that the performance required for the test particle generator for the field inspection equipment of PM-2.5 sensors could be satisfied.

• 품질경영학회지
• /
• 제22권1호
• /
• pp.205-213
• /
• 1994

We construct a new lower bound of Cramer-Rao type for the median-unbiased estimator in the presence a nuisance parameter. We also identify useful necessary and sufficient conditions for the attainability of the lower bound. Some applications including the analysis of censored reliability data are considered as examples.

• 품질경영학회지
• /
• 제15권2호
• /
• pp.61-68
• /
• 1987

This paper considers the estimation of the parameters of a normal population from which a sample which has been censored at a known point is obtained. Simple estimators are presented which are given in closed forms. It is shown that maximum likelihood estimators are obtained by using the estimation procedure iteratively. Some computer simulation results are given.

• Progress in Superconductivity
• /
• 제8권2호
• /
• pp.143-151
• /
• 2007

Accurate measurements of the microwave surface resistance (Rs) of high temperature superconductor (HTS) films are important with regard to applications of HTS materials for wireless communications. As the surface resistance values of HTS films are usually extracted from the measured unloaded quality factor ($Q_0$) of resonators made of HTS films, it is essential to measure the resonator $Q_0$ with accuracy. The $TE_{011}\;mode\;Q_0$ of sapphire resonators with the endplates made of $YBa_2Cu_3O_{7-{\delta}}$(YBCO) film on $LaAlO_3$ is measured by using the S-parameter circle-fit method at a frequency of about 19.6 GHz and temperatures of 30 K to 90 K, which is compared with the measured values by using the Lorentzian-fit method. Good agreements are found between the two sets of $Q_0$ values measured by using the two different methods whether the resonator is used in a weak-coupling scheme or a strong-coupling scheme, showing reliability of both methods fur measuring the resonator $Q_0$ accurately. The $Q_0$ of sapphire resonators with a gap between the top plate and the rest of the resonator is also discussed.

• 한국콘텐츠학회논문지
• /
• 제11권12호
• /
• pp.814-821
• /
• 2011

256 다중 검출기 전산화단층촬영 (multi detector computed tomography, MDCT)에서 두개부 전용 팬톰을 이용하여 분해능 파라메터와 재구성 필터의 영상 품질을 평가하고자 하였다. 사용한 장비는 256 MDCT 을 사용하였으며 philips system head phantom을 이용하여 Extended Brilliance Workspace에서 영상의 질 평가를 측정하였다. 장비에서 지원하고 있는 분해능 파라메터와 재구성 필터가 화질에 미치는 영향을 알아보기 위해서 검사조건을 $512{\times}512$ matrix, $128{\times}0.625$ mm beam collimation, 120 kVp, 250 mAs, 0.5 sec, 250 mm field of view (FOV), 절편 두께와 절편 간격은 5 mm, 1.0 pitch로 동일하게 적용하였다. 분해능 파라메터은 'Standard', 'High', 'Ultrahigh'로 구분하여 적용하였으며, 재구성 필터는 'A', 'B', 'C', 'D', 'UA', 'UB', 'UC' 등으로 바꿔가면서 영상을 재구성하여 노이즈, 균일도, 직선성, 변조전달함수 (modulation transfer function, MTF)의 50%와 10%를 측정하였다. 그 결과 'High' 분해능은 균일도, 직선성, MTF 50%와 10%에서 우수하였다. 'UA', 'UB' 재구성 필터는 균일도와 노이즈 평가에서 양호했으며 'C'재구성 필터는 직선성과 MTF 50%와 10%에서 양호하였다.

• The Journal of the Acoustical Society of Korea
• /
• 제18권1E호
• /
• pp.3-6
• /
• 1999

In digital mobile communication system, the transmission errors affect the quality of output speech seriously. There are many error concealment techniques using a posteriori probability which provides information about any transmitted parameter. They need knowledge about channel transition probability as well as the 1st order Markov transition probability of codec parameters for estimation of transmitted parameters. However, in applications of mobile communication systems, the channel transition probability varies depending on nonstationary channel characteristics. The mismatch of designed channel transition probability of the estimator to actual channel transition probability degrades the performance of the estimator. In this paper, we proposed a new parameter estimator which adapts to the channel characteristics using short time average of maximum a posteriori probabilities(MAPs). The proposed scheme, when applied to the LSP parameter estimation, performed better than the conventional estimator which do not adapt to the channel characteristics.

• 한국물환경학회지
• /
• 제24권4호
• /
• pp.430-435
• /
• 2008

In order to design Non-point source management, the aspect of statistical features of the entire precipitation data should be focused since non-point source discharge is driven by continuous rainfall runoffs. 3-parameter mixed exponential probability density function is used to establish urban stormwater capture curve instead of previous single-parameter exponential PDF. Then, recent 10-year data in Busan are applied to establish the curve. The result shows that 3-parameter mixed PDF gives better resolution.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.493-495
• /
• 1998

Robust design is one method to make manufacturing less sensitive to manufacturing process. Also it is cost effective technique to improve the quality process. This method uses statistically planned experiments to vary settings of important process control parameters. In this paper we apply fuzzy optimization and fuzzy logic system to robust design concept. First a method which uses fuzzy optimization in obtaining optimum settings by measured data from experiments will be presented. Second, fuzzy logic system is made to reduce experiments using experiments results consisted with key control parameter combinations. Then optimum parameter set points are obtained by the descrebed first fuzzy optimization method after prediction the results of each parameter combinations considering each control parameter variations by nonsingleton fuzzy logic system concept.

• 한국물환경학회지
• /
• 제29권2호
• /
• pp.165-169
• /
• 2013

Freshwater fish intake is a critical parameter for deriving water quality criteria and water quality standards for protection of human health based on human health risk assessment. Although the freshwater fish intake parameter should be accurate and representative of Korean fish consumption for the water quality criteria to be reliable, data are limited in Korea and have low reliability. In this study, Korean National Health and Nutrition Examination Survey data from 2008-2010 were analyzed to reevaluate freshwater fish consumption. Based on these results, an average consumption rate of 3.0 g/day per person, a $90^{th}$ percentile consumption rate of 0.0 g/day per person, an average consumption rate of 65.7 g/day per fish consumer, and a $90^{th}$ percentile consumption rate of 153.4 g/day per fish consumer were proposed for derivation of water quality criteria using a conservative approach and various exposure scenarios.

• 정보관리학회지
• /
• 제19권3호
• /
• pp.161-188
• /
• 2002

1990년대에 들어서면서 보편화되기 시작한 정보화의 물결은 도서관의 서비스 형태에도 많은 변화를 가져왔다. 그러나 도서관 이용자의 입장에서는 어떤 형태의 서비스가 제공되더라도 기본적으로 이용자가 제공받는 서비스일 뿐, 도서관 이용에 대한 느낌이나 감정 등을 포함하는 서비스의 만족도는 제공받은 서비스의 품질에 의해서 좌우될 수밖에 없다는 특성을 갖는다. 본 연구는 도서관의 서비스 제공이 갖는 이러한 기본적인 특성에 착안하여 이용자들의 관점에서 서비스의 품질 수준을 평가하고, 이에 영향을 미치는 주된 요인들을 파악하여, 향후 더욱 높은 수준의 서비스를 제공할 수 있는 기틀을 마련하고자 하였다. 연구의 모형으로는 서비스 품질을 측정할 때 이용되는 서브퀄(SERVQUAL) 모형을 채택하여, 전문도서관에서 이용자들이 느끼는 서비스 품질에 대한 기대와 지각을 측정하였다.