• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.641-646
• /
• 1997

Polymer cement mortar which is used as material for aging concrete structures is generally mixed manually and applied on the job site. but, to secure the required quality of the mortar, pre-mixed polymer cement mortar is favored. This study was initiated to four different pre-mixed polymer cement mortars which are produced in Korea. The for pre-mixed mortars were selected and tested with respect to physical and mechanical properties an proved that their qualities were better than those of common cement concrete mortars.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.121-122
• /
• 2016

Recently in the domestic construction industry, source depletion has resulted in instances of ready-mixed concrete companies using river sand or crushed sand with high fine particle content. But the use of such low-quality fine aggregate is known to cause concrete quality to decline and have negative effects. So this study analyzed how much of an impact changes in fine particle content have on cement mortar's engineering characteristics. As a result, the flow rate and air quantity, which are characteristics of unhardened mortar, were shown to decrease as fine particle content increased, and compression strength, a characteristic of light mortar, was shown to subtly increase as fine particle content decreased.

• 콘크리트학회논문집
• /
• 제12권1호
• /
• pp.45-52
• /
• 2000

The quality of cement mortar products largely depends on various work conditions, specially on the grading and grade shape of aggregates. However, the effect of grading and grade shape on the quality is not considered by both KS codes and production processes, resulting in the increase of the possibility of quality degradation. The objective of this study was to investigate the effect of grading and grade shape on the strength and absorption characteristics of cement mortar products. Flexural and compressive strength increased with the increase of fineness modulus and W/C. The strength increase was measured larger with river sand than with crushed sand. Absorption tended to decrease with the increase of fineness modulus and W/C, but did not affected by the source of sand.

• 한국건축시공학회지
• /
• 제21권1호
• /
• pp.11-19
• /
• 2021

본 연구는 타일 떠붙임 시멘트 모르타르의 시멘트 : 잔골재의 혼합 비율인 모르타르 배합비에 따른 품질 특성 및 시공성에 대한 관능 평가를 실시한 것이다. 즉, 타일 시공 후 타일 탈락 하자와 관련한 타일 부착량 및 바탕 부착 하중 시험을 통해 타일 떠붙임 시공 시 콘크리트 바탕면과 타일면의 부착 성상이 서로 다른 것을 알 수 있었다. 또한, 시공성에 관한 관능 평가 결과 타일 떠붙임 모르타르의 시멘트에 대한 잔골재의 질량 비율인 S/C 6 이상은 도기질 타일과의 초기 부착성은 우수하나, 마감 조정성이 불량하고, 바탕면에서 처짐 발생 우려가 있다. 반면, S/C 4 이하는 마감 조정성은 좋으나, 초기 부착성이 저하하고, 바탕면에서 점성에 의한 처짐 등으로 시공성이 저하하며, 부착강도가 저하하여 타일과 모르타르의 계면 탈락 우려가 있는 것으로 평가되었다. 따라서 도기질 타일용 타일 떠붙임 모르타르의 우수한 품질 및 시공성을 확보하기 위해서는 S/C 5 전후가 가장 적정한 혼합 비율로 평가되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.220-223
• /
• 2004

It is fact that the cement is the most important material to harden the mortar and concrete, and Potland cement is used widely. Also, the chemical and physical properties of cement are different according to the kinds of cement. This is an experimental study to compare and analyze the influence of cement strength on the compressive strength of mortar to improve the quality of mortar and concrete. According to test results, it was found that correlation between cement strength and mortar strength was very high in all mixture.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.166-171
• /
• 1996

This study examines whether the raw diatomaceous rock, after thermally activated for converting into a pozzolanic form, can improve cement quality(i.e., compressive strength) of the cement-mortar. The diatomaceous rock, heat-treated at 75$0^{\circ}C$ for 30minutes as an optimum pozzolanic form was mixed with OPC(Ordinary Portland Cement) on a weight basis from 0, 2.5, 5.0, 10, 20, 40%. The cement quality was then assessed by the compressive strength and analysis of XRD(S-Ray Diffraction) and SEM(Scanning Electron Microscope).

• 한국건설순환자원학회논문집
• /
• 제12권2호
• /
• pp.152-161
• /
• 2024

본 논문에서는 마그네시아-인산칼륨 기반의 무시멘트 하이볼륨 플라이애시 보수 모르타르를 제조하고 그 기초 품질 특성을 평가하였다. 최적의 무시멘트 모르타르 배합을 도출하기 위하여, 마그네시아 비율을 기준으로 제조 특성을 평가하였고, 플라이애시 혼합에 따른 모르타르 제조 특성을 평가하였다. 또한 마그네시아 무시멘트 보수 모르타르는 플라이애시 혼합의 효과 및 바잘트 섬유를 고려하여 제조하였다. 평가결과를 통하여, 마그네시아 무시멘트 보수 모르타르의 최적 배합을 결정하였으며, 작업성 및 기초 품질 특성 평가를 통하여 실현 가능성을 검토하였다. 본 논문에서는 마그네시아의 최적 비율은 P:M 1:0.5, W/B 30 %로 나타났으며, FA와 바잘트 섬유 혼합 시 섬유 분산성과 워커빌리티가 향상됨을 확인하였다. 또한 FA를 50 % 이상 혼합해도 6시간 이내 목표 강도를 만족하는 것으로 나타났으며, 플로우가 최대 18 % 증가하고, 휨강도는 1~2 MPa 수준 감소하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.557-560
• /
• 2003

This study deals with the method of test for waterproof agent and admixture of cement, and especially, the effect on bond strength between waterproofing layer and mortar or concrete substrate in building construction. Quality of that has been managed according to it of construction standard manual, housing construction manual, 건, and Q until performance of that is specified by law as KS F 4923. Therefore this study focus on the quality and trend for a fatty system and PCM(Polymer Cement Mortar)

• 콘크리트학회논문집
• /
• 제12권3호
• /
• pp.11-19
• /
• 2000

It has been reported that few manufacturers of cement mortar for precast products use chemical and mineral admixture due to the absense of restrictions related to the application of admixture and the poor manufacturing facilities. Therefore, this paper is intended to contribute to the improvement of quality by investigating the properties of cement mortar for precast products using fly ash, blast furnace slag and AE water reducing agent. According to the test results. it was found that the cement mortar products using fly ash and AE water-reducing agent had better qualities than those of ordinary portland cement.

• 한국세라믹학회지
• /
• 제44권9호
• /
• pp.496-501
• /
• 2007

The properties of the polymer-modified mortars are influenced by the polymer film, cement hydrates and the combined structure between the organic and inorganic phases. Also, this quality of polymer modified cement strongly depend on weather condition. To overcome this problem, polymer-modified cement based on rapid setting cement mortars were prepared by varying polymer/cement mass ratio (P/C) with a constant water/cement mass ratio of 0.5. The effect of polymer on the hydration of this polymer cement is studied on different curing temperature. The results showed that the polymer mortar which is modified with rapid setting cement have superior physical strength properties on independent curing temperature. In addition the PIC ratio, the compressive strength, flexural strength, tensile strength and adhesion strength of mortar is enhances and polymer-modified cement based on rapid setting cement is more beneficial to the improvement of the mortar properties in jobsite.