• Journal of Environmental Science International
• /
• v.17 no.4
• /
• pp.423-437
• /
• 2008

Until comparatively lately, the annual time series of the $SO_2$ concentration had been shown in a decreasing trend in Ulsan as well as other Korean cities. However, the high concentration of $SO_2$ was frequently found in the specific countermeasure region including the national industrial complex such as Mipo and Onsan in the Ulsan city for the period of $2001{\sim}2004$. There are many conditions that can influence the high concentration of $SO_2$ at monitoring sites in Ulsan, such as: First, annual usage of the fuel including sulfur increased in comparison with the year before in spite of the fuel conversion policy which wants to use low sulfur oil less than 3% and LNG. Second, point source, such as the power plants and the petroleum and chemistry stacks, was the biggest contributor in $SO_2$ emission, as a analyzed result of both the air quality modeling and the stack tole-monitoring system (TMS) data. And third, the air pollutants that occurred in processes of homing and manufacturing of the fuel including sulfur were transported slow into a special monitoring site by accumulating along the frontal area of see-breeze. It was concluded that Ulsan's current environmental policy together with control methods should be changed into the regulation on total amount of emission, including a market-based emission trading with calculating of atmospheric environmental critical loads, for the $SO_2$ reduction like the specific countermeasure for the $O_3$ and PM10 reduction in the Seoul metropolitan area. And this change should be started in the big point sources of $1{\sim}3$ species because they are big contributors of Ulsan's $SO_2$ pollution. Especially it is necessary to revitalize of the self-regulation environmental management. Other control methods for sustaining the $SO_2$ reduction are as follows: maintenance of the fuel conversion policy, reinforcement of the regional stationary source emission standard, and enlargement of the stack TMS.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.1
• /
• pp.85-97
• /
• 1993

Grouping of the Korean traditional rice processed foods and their historical background in development were surveyed, principally being concentrated on the current topics reported on the rice-processed foods such as rice cakes and rice cookies. Rice-processed foods could be classified into seven groups according to the literature reported so far: rice gruels, boiled rices, rice cakes, alcoholic liquors, non-alcoholic beverages and seasonings. Among them, rice gruels and boiled rices were further divided into seven to eight groups based on their characteristics together with added materials. Eighty one names of rice cakes were reported in the literature, however it might be condensed to five groups according to their processing methods. Ninety different alcoholic liquors were found and arranged according to the cited period in the literature. Five kinds of rice cookies and nine kinds of non-alcoholic beverages were found in the literature. These are maintained until today with almost identical methods of preparation as described in the old literature. The scientific research results on the Korean traditional rice cakes and cookies published in the literatures were reviewed. A total of forty one research papers were collected: twenty seven papers on rice cakes and fourteen papers on rice cookies. Most of the researches were concerned to the processing conditions. The author felt deeply some too short of researches in the physicochemical changes during processing, the maintenance of the products quality and the industrialization of the traditional processing methods in rice foods.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.9
• /
• pp.1233-1242
• /
• 2011

The in vivo digestibility of mulberry leaves (Morus alba) and the effects of the partial replacement of cotton seed with fresh mulberry leaf in rations on the performance of growing Vietnamese cattle was investigated. For the in vivo digestibility trial, twenty castrated rams of Phanrang breed (a local prolific breed) with an initial weight of 23-25 kg, were first assigned to four groups according to weight and then randomly assigned to one of four dietary treatments to determine digestibility of nutrients in mulberry leaves (M. alba), natural Bermuda grass (Cynodon dactylon), elephant grass (Pennisetum purpureum) and buffalo grass (Panicum maximum cv. TD 58). All forages were cut and chopped daily before being offered (at 120% maintenance) to the sheep. In the feeding trial, 20 Laisind (Vietnam yellow cows${\times}$Red Sindhy bulls) crossbred bulls averaged 18 month old and 184 kg were used to investigate the effect of partial replacement of cottonseed in the diet by mulberry leaves on live weight gain and feed conversion rate. The experiment was a randomized complete block design with four levels of fresh mulberry leaves which varied from 0 to 15% of total dietary dry mater and five animals per treatment over an 84 day period. The in vivo digestion trial showed the superior quality of mulberry leaves compared with the grasses. Chemical analysis indicated that mulberry leaves had the highest CP and the lowest NDF contents (22.3 and 31.1% DM, respectively) among the four forages tested. Digestibility of DM and OM of the mulberry leaf (66.4 and 71.8%, respectively) was also the highest but that of CP (58.2%) and NDF (58.4%) was the lowest of the four forages evaluated (p<0.05). Consequently, the ME value and therefore net energy (NE) and unit feed for lactation (UFL) values of the mulberry leaves, which was estimated from chemical composition and digestibility values, were the highest among the forages investigated in the present study. Results of the feeding trial showed no treatment effect on average daily gain (ADG) of the cattle. The values were 554, 583, 565 and 568 g/d for animals in the diets of 0, 5, 10, and 15% mulberry leaves inclusion, respectively. Total DM intake of the animal was not affected by the treatment when expressed as kg/animal/d. However, when adjusted for metabolic weight of the animal the DM intake was reduced (p<0.05) as whole cottonseed was replaced by mulberry leaves in the ration. When the level of mulberry leaves in the ration increased from 5 to 15% of dietary DM at the expense of whole cottonseed, CP and ME intakes of the cattle were significantly decreased (p<0.05) and the feed to gain ratio reduced by 8 to 14% as compared with the control diet (p<0.05). Mulberry leaf is a good feed ingredient for ruminants because of its high level of crude protein and high digestibility of nutrients and energy. Mulberry leaves can be efficiently used as a source of protein supplement to replace cottonseed, a more expensive animal feeds ingredient, in the diet for Vietnamese cattle.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2004.11a
• /
• pp.158-161
• /
• 2004

In order for better management of a medical linear accelerator, the records of the operational failures of Varian CL2100C over ten years were analyzed. The failures were classified according to the involved functional subunits and each class was rated into three levels depending on operational conditions. The relationship between the failure rate and working ratio was investigated. Among the recorded failures ( total 587 failures), the most frequent failure, which was 20% of the total. was observed in the parts related to the collimation system including monitor chamber. Regrading to the operational conditions, the 2nd level of failures, that temporally interrupted treatments, was the most frequent. The 3rd level of failures, that interrupted treatment for more than several hours, was mostly caused by the accelerating subunit. The average life-time of a Klystron and Thyratron became shorter as the working ratio increased, which was 42 and 83% of the expected values, respectively. Recording equipment problems and failures in detail over a long period of time can provide a good knowledge of equipment function as well as the capability to forecast future failure. More rigorous equipment maintenance is required for old medical linear accelerator to avoid the serious failure in advance, and improve the patient treatment quality.

• Journal of Nutrition and Health
• /
• v.38 no.9
• /
• pp.765-776
• /
• 2005

The purposes of this study were to a) examine IC (intellectual capital) circumstance of CFMC (contract foodservice management company), b) identify the correlation between IC of CFMC, c) analyze the cause and effect of IC in the viewpoint of contractor, client, and customer. The questionnaires of IC measurement were handed out to 108 CfHCs, there composing of main office employees, foodservice managers, customers, and clients of 207 school, 38 hospital, and 86 business/industry foodservices. The statistical data analysis was completed using SPSS Win (ver 12.0) for descriptive analysis, correlation analysis, simple linear regression analysis. First, CFMCs had operational experience for an average of 8 years and 8 months, and served an average of 38,540 meals a day. Most of the respondent companies operated 'food supply/distribution($50\%$)', 'catering ($46.7\%$)', and restaurant business ($43.3\%$)' except for institutional foodservice and managed an average of 66 clients for the contract period of 2 years and 3 months. Second, there was positive correlation between $\ulcorner$sales of foodservice$\lrcorner$ and 'market ability', $\ulcorner$client satisfaction$\lrcorner$ and necessary intellectual capital for managing branch/chain foodservice office, and $\ulcorner$customer satisfaction$\lrcorner$ and $\ulcorner$renewal and development$\lrcorner$, 'market ability', 'infrastructure support for foodservice operation', 'employee satisfaction', respectively. Finally, the result of the cause and effect analysis on CFMCs, clients, and customers was positively influenced by 'client satisfaction' with 'customer satisfaction', 'infrastructure support for foodservice operation' and 'customer satisfaction' with 'employee satisfaction', and 'infrastructure support for foodservice operation'. In conclusion, if CFMCs were to perform a routine checkups by utilizing CFMC's IC measuring tool, improvements in CFMC operational capacities as well as foodservice quality can be noted. Additionally, CFMCS can satisfy their client-customer relationship by employing internal marketing thechniques for employee, a more efficient infrastructure support system, and construc tive infrastructure utilization. Therefore, CFMCs can show significant improvement in their sales and foodservice quali-ty though continuous maintenance of the client and customer satisfaction.

• Journal of Korea Water Resources Association
• /
• v.47 no.10
• /
• pp.973-983
• /
• 2014

This study focused on the selection of appropriate plant species of VFS (vegetative fiter strips) and the assessment of VFS effects for reducing NPS (non-point source) pollution from uplands. The experimental field was constructed with 1 control and 6 treated plots in the upland area of $1,500m^2$ with 5% slope which is located in Gunwi-gun, Gyeongbuk province. Six vegetation including Chufa, Common crabgrass, Barnyard grass, Turf grass, Tall fescue, Kenturky bluegrass, were applied to install VFS systems during the study period from June 2011 to Dec. 2012. The results of this study showed that 6.1~77.8% in runoff and 15.6~90.3% in TS, 49.9~96.6% in T-P, and 6.7~91.1% in T-N were reduced from the VFS treated plots. Generally high reduction effects were observed from TS, T-P, T-N, and SS, while BOD, TOC, and $NO_3^-$ showed low reductions. The best vegetation type was Turf grass showing higher reduction effects of NPS pollutions and having relatively easier maintenance efforts compared to other vegetations selected in this study. Based on these results, VFS technique found to be an effective management practice for reducing agricultural NPS pollutions in Korean upland conditions. Further study needs to be performed through various field experiments with long term monitoring in order to develop a design manual of VFS system for practical applications.

• Journal of Korean Public Health Nursing
• /
• v.3 no.1
• /
• pp.18-37
• /
• 1989

This study was done in order to analyze the factors which influenced the performance level of community health practitioners' task. Interview survey was done during the period from August to October, 1986. Interviewee were 166 CHPs among total of 217 CHPs in Kyonggi province area. Multiple stepwise regression and canonical correlation analysis were used to identify major factors influenced to perform community health practitioners' task. The results of this study were summarized as follows: 1. General characteristics of CHPs 1) Personal characteristics The average age of CHPs was 37.8 years and their marital status was $77.6\%$ of married, educational back-ground was $65.3\%$ of junior college graduation. Their job career was $38.6\%$ of between 1-3 years, $33.3\%$ of between 3-5 years, $22.2\%$ of less than 1 years. Most of CHPs$(62.8\%)$ were fully satisfied with their job, $33.3\%$ were moderately, and $3.8\%$ were not satisfied. 2) Working environmental condition Only $31.7%$ of CHPs were satisfied with their working condition of primary health post, $26.6\%$ were not satisfied. Half of CHPs$(52.5\%)$ replied having good cooperation with health center, $10.1\%$ replied bad. Cooperation with health subcenter was good in $32.9\%$, and bad in $21.9%$. Cooperation with private health institutions was good in $34.2\%$, bad in $21.6%$. 2. Performance level of community health practitioners' task Among a total of 52 contents of their functions medical history taking. physical examination, referral of diagnostic laboratory work-up($(86.4\%)$, health assessment of pregnant women$(82.1\%)$, development of health information system$(79.4\%)$, supervision of health workers $(78.4\%)$, follow-up of family planning acceptors$(77.3\%)$, and follow-up of family planning acceptors' side effects$(77.3\%)$ were actively performed. Diagnosis of pregnancy$(62.1\%)$, sampling of drinking water for quality test$(52.5\%)$, making list of equipment' & supplies $(51.5\%)$, evaluation of primary health post activities $(37.6\%)$, organization of village health workers$(32.4\%)$ and management of village health workers $(30.1\%)$ were poorly performed. 3. Stepwise multiple regression analysis of job function The factors which influenced the performance level of community health practitioners' function were age, marital status, educational level, job career, job satisfaction, satisfaction of working environment of primary health post, cooperation of health center, cooperation of health center, cooperation of private health instiutions in orders. These 9 variables were able to explain job function from $25.7\%$ of program planning to $6.7\%$ of management of common disease. 4. Canonical correlation analysis between the performance of function and general characteristics of CHPs. Cooperation of private health institutions was found to be the factor influencing task performance of community organization, management of primary health post, technical supervision of health personnels. Job satisfaction of CHPs was also found to be the factor influencing task performance of family planning, management of common disease and maintenance of health information system.

• Journal of Periodontal and Implant Science
• /
• v.34 no.2
• /
• pp.303-315
• /
• 2004

The success and failure of dental implants depends on various factors such as patient's systemic status, quantity and quality of surrounding bone, presence or absence of marginal infection and mechanical loading condition. The measurement of crestal bone changes around the implants is implemental to evaluate the success and long-term prognosis of the implant. This study was to evaluate the cumulative survival rate of the implants which had been placed in the Department of Periodontics, Chonnam National University Hospital between 1992 and 2003, and to observe the crestal bone loss around the implants which had at least 2 consecutive periapical radiographs after connecting the transmucosal abutment. The radiographs were scanned and digitalized, and the crestal bone levels on the mesial and distal surface of implants were measured using Image analyzer (Image Pro Plus, Media Cybernetics, USA), immediately after implant placement, at 2nd surgery, and 3 months, 6 months, 1 year, and every year thereafter. Any bone loss was not observed during the period between the 1stand 2nd surgery, and the bone loss was 0.86 ${\pm}$ 0.92 mm for the first year of loading after connecting the transmucosal abutment. After 1 year of loading, annual bone loss was 0.1 ${\pm}$ 0.27 mm, and total bone loss was 0.90 ${\pm}$ 0.80 mm (during the average follow-up periods of 22.5 ${\pm}$ 25.6 Mos), The implant, with smooth surface, in the mandible, and with the fixed bridge prosthesis showed greater bone loss, compared to those, with the rough surface, in the maxilla and with single crown. In systemically diseased patients (including DM or osteoporosis), the greater bone loss was observed. The cumulative survival rate among 432 implants was 94.10% for 7 years. Among 15 failed implants, 9 implants were removed due to mobility from disintegration of bone-implant interface. From this results, crestal bone loss around the implants were greatest during 1 year after transmucosal abutment connection, and various factors could affect peri-implant bone loss. To prevent and predict the bone loss around the implants and improve the prognosis, further comprehensive maintenance and follow-up schedules are required.

• Journal of Environmental Science International
• /
• v.26 no.2
• /
• pp.231-238
• /
• 2017

Rapid industrial development has led to a serious problem of pollution in the industrial sector. With the increasing social need for environmental protection, research on air pollution prevention equipment for reducing pollutants in industrial processes is actively being undertaken. The deterioration of existent, installed facilities, their increased emission rates, and the strengthening of the effluent quality standards make complying with permissible emission standards difficult. In fact, installing new electric precipitators or complementing existent facilities is inevitable. The expansion and complementation of the installed electrical precipitators have led to improvements in dust collection efficiency, shorter working times, and lower costs. Because of its easy installation and simple manufacturing process, the production method with the discharge electrode of an electric precipitator is widely used. The following conclusions were reached by classifying discharge electrodes into four types based on the production method and mutually comparing them by their dust collection efficiency. None of the four types used in this study were damaged by impact. However, we were able to confirm some strain from the compression sites of both type A and type B. Both type B and type C are expected to have greater dust collection efficiencies than the other models due to their large vibration transmissibility. Moreover, the high vibrational energy is expected to cause rapping damage during its operation. Particularly, in the case of type B, some of the strain was found at the end of the compression site. The coupling schemes of both type C and type D are out of vibration transmissibility. On the other hand, the ability to maintain straightness and solidity of the side is regarded as outstanding and stable. Type D has outstanding on-site workability, considering the presence of locking, structural stability, and work conditions. From these experiments, we determined that type C is the most ideal connection method of discharge electrode, considering its construction period of renovation. Type C is inferior to type D with regard to on-site workability. However, type C has outstanding dedusting transmission with regard to the straightness, solidity maintenance, and vibration of shearing stress.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.6
• /
• pp.727-735
• /
• 2007

The use of water by cities is increasing owing to industrialization, the concentration of population, and the enhancement of the standard of living. Accordingly, the amount of waste water is also increasing, and the degree of pollution of the water system is rising. In order to solve this problem, it is necessary to remove organisms and suspended particles as well as the products of eutrophication such as nitrates and phosphates. This study developed a high-end treatment engineering solution with maximum efficiency and lower costs by researching and developing a advanced treatment engineering solution with the use of Biosorption. As a result, the study conducted a test with a $50m^3/day$ Pilot Scale Plant by developing treatment engineering so that only the secondary treatment satisfies the standard of water quality and which provided optimal treatment efficiency along with convenient maintenance and management. The removal of organisms, which has to be pursued first for realizing nitrification during the test period, was made in such a way that there would be no oxidation by microorganisms in the reactor while preparing oxygen as an inhibitor for the growth of microorganism in the course of moving toward the primary settling pond. The study introduced microorganisms in the endogeneous respiration stage to perform adhesion, absorption, and filtering by bringing them into contact with the inflowing water with the use of a sludge returning from the secondary settling pond. Also a test was conducted to determine how effective the microorganisms are as an inner source of carbon. The HRT(Hydraulic Retention Time) in the nitrification tank (aerobic tank) could be reduced to two hours or below, and the stable treatment efficiency of the process using the organisms absorbed in the NAR reactor as a source of carbon could be proven. Also, given that the anaerobic condition of the pre-treatment tank becomes basic in the area of phosphate discharge, it was found that there was excellent efficiency for the removal of phosphate when the pre-treatment tank induced the discharge of phosphate and the polishing reactor induced the uptake of phosphate. The removal efficiency was shown to be about 94.4% for $BOD_5$. 90.7% for $COD_{Cr}$ 84.3% for $COD_{Mn}$, 96.0% for SS, 77.3% for TN, and 96.0% for TP.