• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1303-1308
• /
• 2007

Recently, precast concrete tracks are replacing ballast track for efficient and economic maintenance of track. Precast concrete railroad tracks are manufactured in factory, and transported to railroad construction site for installation. Therefore, quality of precast concrete track itself should be sufficiently good. On the contrary to the convenient manufacturing of precast concrete track, the installation of a precast concrete track requires careful steps. Typically, a precast concrete track is placed on an approximately 15-cm thick lean concrete layer. A mortar is filled between lean concrete layer and precast concrete track to adjust the sloping angle of a precast concrete track for a safe train operation at a curvy section. Then, the use of filled mortarproduces a void underneath a precast concrete track, which is harmful to structural safety of a precast concrete track undercyclic loading. Therefore, it is essential to make sure that there is no void left beneath a precast concrete track after mortar filling. In the continuous resonance method, the amplitude of frequency response measured using an instrumented hammer and an accelerometer is plotted against a pseudo-depth, which is half of the wave velocity divided by frequency. The frequency response functions are measured at consecutive measurement locations, 6-cm interval between measurement points, and then combined together to generate a 2-D plot of frequency response. The sections with strong reflections or large amplitude of frequency response are suspicious areas with internal voids and unfilled areas. The 2-D frequency response plot was efficient in locating problematic sections just by examining the color shade of a visualized plot in 2-D format. Some of the problematic sections were drilled to make a visual inspection of mortar filling. The visual image of interface between mortar and precast concrete track was verified using the validity of the continuous resonance technique adopted in this research.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.10
• /
• pp.53-59
• /
• 2011

In recent years, mobile communication service is used extensively as a larger service area for the maintenance of quality of service required by the expansion of service areas and As the ever-increasing role in relays, and the location is relatively easy to install and less constrained costs, operating cost savings in terms of ICS(Interference Cancellation System) repeaters are required. However, an adaptive algorithm that is applied when updating the filter due to the increase in volume of operations increase the complexity of hardware implementation is fraught with many difficulties. In this paper, if there is a path that feedback. ICS repeater utilizing baseband signal processing for the removal of interfering signals from the feedback operation, significantly reducing the amount of reducing hardware complexity Complex Singed Signed LMS adaption algorithm is proposed. Proposed algorithm for evaluating the performance of Static channel WCDMA signal environment for the ICS, the results of the simulation algorithm, convergence speed and better performance in therms of convergence errors that are required through the implementation of the operation greatly reduces the amount of hardware complexity able to reduce the effect was visible.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.733-737
• /
• 2018

In this paper, we describe the effects on the power system by adding renewable generator. In order to examine the stability of the system, the system analysis was performed using the PSS/E software. We confirmed whether occur the line overload of system through the load flow analysis and contingency analysis. and confirmed whether exceed of fault current using the fault current analysis. Dynamic stability of the system is analyzed through dynamic simulation. The analysis of the system according to the addition of the renewable generator was carried out according to the power system reliability and electricity quality maintenance standard.

• Journal of the Korean housing association
• /
• v.20 no.4
• /
• pp.31-38
• /
• 2009

In our country, the application of the design method of face to face dimension in wall-slab apartment has passed 10 years. So MC(Modular Coordination) design method has fixed in the design step to some degree. In Design and Work Execution of House the exclusive area of the apartment was calculated by face to face dimension. And the term of face to face dimension was known broadly to clients, construction company, etc. But design method of face to face dimension is not to simply extend the room size so far as wall depth in design process but to ensure the actual space should be considered with efficient use and assembly of building components. That is to say, Design method of face to face dimension is not to be defined by design step but to be related with construction and maintenance. However in construction process the point of face to face design method was not understood even now. So the purpose of this study was to extract the effect and question of face to face design method in construction process by survey of actual condition of structure and construction quality, and compare this result with existing construction method. The following project of this study is to survey of actual condition of interior components such as gypsum board, windows & doors etc. Therefore this study is to induce architectural long-life through architectural standardization construction and component's exchange, and, by the subject of the study on Apartment to have design guideline and basis for joining part between Gypsumboard and windows.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.5
• /
• pp.96-100
• /
• 2009

With the improvement of industrial society, the high quality electrical energy, simplification of operation and maintenance, ensuring reliability and safety are being required. This paper compares breakdown characteristics in $SF_6$ gas with $N_2/O_2$ Mixture gas($N_2:O_2=100$ : 0, 79 : 21, 60 : 40, 40 : 60) as using widely in High Voltage insulation equipment with the characteristics in different media which are focused on environmentally friendly gases. As an append result of research the results are fundamental data for electric insulation design of Distribution Power Facilities which will be studied and developed in the future. And we could make an environment friendly gas insulation material with mataining dielectric strength by $N_2/O_2$ Mixture gas which generates a lower lever of the global warming effect.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.13 no.3
• /
• pp.159-176
• /
• 2011

A 3D laser scanner is widely used in various fields such as games, movies, medicines, art, design, etc. Many studies for utilizing the 3D laser scanner in the fields of civil engineering have also been carried out, for example, for systematically managing tunnel and/or bridge construction. However, since a software which is directly applicable to Korean construction system does not exist, the amount of data obtained from existing the 3D laser scanner is too much to handle in a systematic way. Therefore, in this paper, a new data processing technique was established which can rapidly and effectively treat the 3D laser scanning data. Moreover, a software that can systematically manage the tunnel construction was developed. The developed software can assess the construction quality of tunnel excavation such as under-break, over-break, cracks, leakage and efflorescence, etc. A 3D laser scanner and the developed software was applied to an in-situ tunnelling site, and verified usefulness of the 3D laser scanner. The developed software may be useful for tunnel maintenance as well as for systematic management of tunnel construction.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.7
• /
• pp.978-983
• /
• 2006

Forages from grazing lands comprise conventional feed resources for ruminants in the tropical region. A study was conducted to assess fodder productivity and nutritive potential of deferred forages of six silvopastoral traditional fodder banks in central northwest Tanzania, traditionally known as Ngitiri. The grazing lands were dominated by low quality increaser grass species: Eragrostis spp., Aristida spp., Urochloa spp., Rottboellia exaltata, Cenchrus spp., Cynodon spp. and Chloris spp., and forbs species. The grazing lands had low vegetative basal cover that varied (p<0.05) from 34.7 to 75%, and low forage biomass productivity that varied (p<0.05) from 0.76 to 3.69 tones (t) dry matter (DM)/ha. The forages contained low crude protein (CP) that varied (p<0.05) from 16 to 27 g/kg DM; and had high fibre contents, which varied (p<0.05) from 702-725, 497-573 and 119-225 g/kg DM for neutral detergent fibre (NDF), acid detergent fibre (ADF) and acid detergent lignin (ADL), respectively. The forages were poorly degraded in sacco, and showed low DM degradability (DMD) characteristics of 74, 473 and 576 g/kg DM for DM washing losses (a), slowly degradable feed fraction (b) and potential degradability, (a+b), respectively; and low DMD at 48 h incubation, which varied from 317-345 g/kg DM, and contained low metabolizable energy (ME), (4.2-4.36 MJ/kg DM). The herbage forages would not meet protein and energy requirements for maintenance and production, which could be reflected through low animal productivity. Further work is needed to assess animal productivity (growth, milk, draft force) from conserved forages in traditional fodder banks in the dry season.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.10
• /
• pp.1386-1398
• /
• 2010

Soybean contains a high concentration of carbohydrates that consist mainly of non-starch polysaccharides (NSP) and oligosaccharides. The NSP can be divided into insoluble NSP (mainly cellulose) and soluble NSP (composed mainly of pectic polymers, which are partially soluble in water). Monogastric animals do not have the enzymes to hydrolyze these carbohydrates, and thus their digestion occurs by means of bacterial fermentation. The fermentation of soybean carbohydrates produces short chain fatty acids that can be used as an energy source by animals. The utilization efficiency of the carbohydrates is related to the chemical structure, the level of inclusion in the diet, species and age of the animal. In poultry, soluble NSP can increase digesta viscosity, reduce the digestibility of nutrients and depress growth performance. In growing pigs, these effects, in particular the effect on gut viscosity, are often not so obvious. However, in weaning piglets, it is reported that soy oligosaccharides and soluble NSP can cause detrimental effects on intestinal health. In monogastrics, consideration must be given to the anti-nutritive effect of the NSP on nutrient digestion and absorption on one hand, as well as the potential benefits or detriments of intestinal fermentation products to the host. This mirrors the needs for i) increasing efficiency of utilization of fibrous materials in monogastrics, and ii) the maintenance and improvement of animal health in antibiotic-free production systems, on the other hand. For example, ethanol/water extraction removes the low molecular weight carbohydrate fractions, such as the oligosaccharides and part of the soluble pectins, leaving behind the insoluble fraction of the NSP, which is devoid of anti-nutritive activities. The resultant product is a high quality soy protein concentrate. This paper presents the composition and chemical structures of carbohydrates present in soybeans and discusses their nutritive and anti-nutritive effects on digestion and absorption of nutrients in pigs and poultry.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.7
• /
• pp.913-917
• /
• 2000

Sixteen adult Barbari bucks were divided into 4 homogeneous groups, each group was offered wheat straw (WS) at levels 75, 100, 125 and 150 per cent of ad libitum intake in a factorial randomized complete block design. All goats were uniformly fed a supplement ($13.5g\;DM/kg\;W^{0.75}$) to fulfill their requirement for protein at maintenance level. The experimental feeding of goats at different levels for 21 days was followed by a digestion trial of 6 days and determination of rate of passage of digesta for 144 h duration, respectively. Intake ($g/kg\;W^{0.75}$) of dry matter (DM), organic matter (OM), digestible DM and digestible OM increased with increase in amount of WS offered. The levels of WS refusals for obtaining upper limit of intake was found to be above 30% of DMO. Concentration of ADF and lignin was significantly lower and CP was higher (p>0.05) in food ingested relative to food offered or refused in response to increasing allowance of WS. Dietary means of particulate rate of passage from rumen, transit time and total mean retention time ranged from 0.032 to 0.036/h, 19.10 to 21.72/h and 58.61 to 61.53/h respectively and did not show significant differences (p>0.05) irrespective of dietary level of WS. The results suggest that DMI and quality of ingested WS would improve with higher rates of offer and refusals (${\geq}30%$ of DMO) without any pronounced effect on passage kinetics of digesta, because of the greater opportunity afforded to goats for selective feeding.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.214-217
• /
• 2001

This paper presents an implementation methodology of common Rf- integrated PCS base station system which, is capable of providing PCS services for 3 PCS carriers concurrently and wireless system performance evaluation data is shown. We have built up a common PCS base station system using a commonization module, which is consisted of a multi-channel combiner, duplexer, LNA, power divider, feeder line, and a common set of antennas. It was shown that the performance of the system within the total 30MHz PCS frequency range is uniformly acceptable and measured signal quality and coverage are equivalent to that of the individual PCS base station. It is expected that PCS carriers are able to save a huge amount of installation and maintenance expenses by installing and sharing this base station system. This paper forms a groundwork for deploying efficient and economical IMT-2000 network.