• Journal of Korean Society on Water Environment
• /
• v.34 no.1
• /
• pp.67-76
• /
• 2018

There are 34 mega-cities with a population of more than 10 million in the world. One of the highly populated cities in the world is Seoul in South Korea. Seoul receives $1,140million\;m^3/year$ for domestic water, $2million\;m^3/year$ for agricultural water and $6million\;m^3/year$ for industrial water from multi-purpose dams. The maintenance water used for water conservation, ecosystem protection and landscape preservation is $158million\;m^3/year$, which is supplied from natural precipitation. Recently, the use of the other water for preservation of water quality and ecosystem protection in urban areas is increasing. The objectives of this study is to develop the seasonal forecast method of environmental water in urban areas (Seoul, Daejeon, Gwangju, Busan) and to evaluate its predictability. In order to estimate the seasonal outlook information of environmental water from Land Surface Model (LSM), we used the observation weather data of Automated Synoptic Observing System (ASOS) sites, forecast and hind cast data of GloSea5. In the past 30 years (1985 ~ 2014), precipitation, natural runoff and Urban Environmental Water Index (UEI) were analyzed in the 4 urban areas. We calculated the seasonal outlook values of the UEI based on GloSea5 for 2015 year and compared it to UEI based on observed data. The seasonal outlook of UEI in urban areas presented high predictability in the spring, autumn and winter. Studies have depicted that the proposed UEI will be useful for evaluating urban environmental water and the predictability of UEI using GloSea5 forecast data is likely to be high in the order of autumn, winter, spring and summer.

• Journal of KIISE
• /
• v.44 no.3
• /
• pp.332-337
• /
• 2017

When using IFC data consisting of STEP schema based on the EXPRESS language, it is not easy for collaborating project stakeholders to share BIM modeling shape information. The IFC viewer application must be installed on the desktop PC to review the BIM modeling shape information defined within the IFC, because the IFC viewer application not only parse STEP structure information model but also process the 3D feature construction for a 3D visualization. Therefore, we propose a lightweight data structure design for web visualization by parsing IFC data and constructing 3D modeling data. Our experimental results show the weight reduction of IFC data is about 40% of original file size and the web visualization is able to see the same quality with all web browsers which support WebGL on PCs and smartphones. If applied research is conducted about the web visualization based on IFC data of the last construction phase, it could be utilized in various fields ranging from the facility maintenance to indoor location-based services.

• The Journal of Engineering Geology
• /
• v.19 no.3
• /
• pp.345-350
• /
• 2009

The endpoint of the Yangbuk tunnel constructed at the national road between Gyeongju and Gampo is composed of massive cutting because the road is driven through the sides of mountain. PAP(Prestressed Anchor and PC Pannel) retaining wall as a slope stability method was established over this section. Part of the anchor in PAP wall became broken after six months. We performed inverse analysis through its measurements obtained until that time. An geological investigation to confirm the condition of ground layering and the attraction force test to find as to whether some errors might be present in the anchor were made. According to the back analysis, it was turned out that the value with soil parameter 90% that was applied to the original design was pertinent. In the redesign, the permissible stress in the anchor body was changed from 306 kN to 591 kN and 784 kN and the fixation position was increased from 11.0 m to 23.0 m. Nevertheless, five months have passed since the exchange of the anchor, the measurement results validate that stable state has been maintained. This research is considered a case that the immediate maintenance helps prevent the slope accidents.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.1
• /
• pp.146-150
• /
• 1999

With the improved cure rates for childhood malignant conditions in the past decade, late effects of cancer therapy must be recognized to minimize their impact on the quality of life in long-term survivors. Chemoradiation therapy is a major part of pediatric oncology treatment and is implicated in causing tooth agenesis, microdontia, root shortening, early apical closure, and coronal hypocalcification. Dental development may be affected by illness, trauma, chemotherapy, or radiation therapy at any point prior to complete maturation. Treatment given during the first 3.5 years of life was more likely to affect the dental lamina and crown formation and result in a small tooth. Dental treatment affected by chemoradiation damage to developing teeth includes orthodontic tooth movement, prosthetic abutment consideration, periodontal health, space maintenance, requirement for home fluoride regimens to protect hypomineralized teeth, and enodontic procedures. Dental abnormalities are common in patients treated for cancer, and these children require aggressive dental follow-up. Meticulous surveillance may facilitate detection of abnormalities, enabling the dental practitioner to intervene earlier in promoting a more aggressive regimen of oral care, thus reducing the morbidity associated with dental sequelae of oncotherapy, specifically periodontal disease and malocclusion. In this case, we report microdontia of all permanent second premolar and second molar in an 8 year old boy treated with chemotherapeutic agents during period of active dental development(14 months to 38 months of age).

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.92-94
• /
• 2003

The autotransformer currently used on the electric railway system is made of class A insulation material and uses the paper insulation method. As a power converter supplying power to the trolley wire, the autotransformer is one of critical equipment in the railway system. In the autotransformer, load irregularly changes and overload often occurs. These cause overheating of the autotransformer and facilitate deterioration of the autotransformer resulting in burnout accidents due to insulation breakdown. Also, the current autotransformer has poor insolation and short-circuit strength which often badly affect the service life of the transformer, and needs to improve its quality urgently. To overcome one of existing shortcomings of the mold transformer, manufacturers use epoxy resins that have superior flame retardancy to get rid of fro and explosion possibilities during accidents. Currently, new mold transformers are used in indoor distribution facilities with fire-fighting equipments. Coils molded in epoxy resins do not have their insulation performance compromised by humidity, dust, etc enabling easy inspection and maintenance. Comparing to the oil immersed transformer, the mold transformer does not have any concern about environmental pollutions by oil leak or replacement Therefore, to reduce breakdowns and improve reliability of the autotransformer, it is necessary to develop a new mold autotransformer with low loss suitable for our environment to suppress breakdowns of the autotransformer and improve the reliability. This study is about development of a low-loss mold autotransformer necessitated by reasons mentioned earlier.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.30.1-30.6
• /
• 2016

Background: The prognosis of wide implants tends to be controversial. While wider implants were initially expected to result in a larger osseointegration area and have higher levels of primary stability, they were reported to have a relatively high rate of failure. The clinical outcome of ultrawide implants of more than 6 mm in diameter was evaluated through a retrospective study. Methods: The investigation was conducted on patients who had received ultrawide implant (${\geq}6mm$ diameter) placements in Seoul National University Bundang Hospital from January 2008 to December 2013. Complications were investigated during the maintenance period, and marginal bone loss was measured using periapical radiography. Primary stability immediately after the implant placement and second stability after second surgery or during impression were measured using $Osstell^{(R)}$ Mentor (Osstell, Sweden) as an implant stability quotient (ISQ). Results: Fifty-eight implants were placed in 53 patients (30 male, 23 female), and they were observed for an average of $50.06{\pm}23.49$ months. The average ISQ value increased from $71.22{\pm}10.26$ to $77.48{\pm}8.98$ (P < 0.005). The primary and secondary stability shows significantly higher at the mandible than at the maxilla (P < 0.001). However, mean survival rate shows 98.28 %. Average marginal bone loss of 0.018 and 0.045 mm were measured at 12 and 24 months after the loading and 0.14 mm at final follow-up date (mean 46.25 months), respectively. Also in this study, the bone loss amount was noticeably small compared to regular implants reported in previous studies. Conclusions: The excellent clinical outcome of ultrawide implants was confirmed. It was determined that an ultrawide implant can be used as an alternative when the bone quality in the posterior teeth is relatively low or when a previous implant has failed.

• Journal of Korean Academy of Nursing
• /
• v.42 no.3
• /
• pp.385-395
• /
• 2012

Purpose: This purpose of this study was to develop and validate a Self-Efficacy Scale for Self-Management of Breast Cancer (SESSM-B). Methods: The SESSM-B was developed and validated as follows: Item generation, pilot study, and tests of validity and reliability. Twenty-one items were developed through evaluation by 10 experts and 13 items were finally confirmed through item analysis and factor analysis. Psychometric testing was performed with a convenience sample of 303 women with breast cancer. Data were analyzed using factor analysis, Pearson correlation coefficients, and Cronbach's alpha. Results: Five factors evolved from the factor analysis, which explained 69.8% of the total variance. The first factor 'coping with psycho-informational demand' explained 17.2%, 2nd factor 'maintenance of healthy lifestyle' 14.5%. 3rd factor 'management of side-effects' 13.3%, 4th factor 'therapeutic compliance' 12.8%, and 5th factor 'sexual life' 11.9%. SESSM-B also demonstrated a concurrent validity with health-related quality of life scale, EORTC QLQ-C30 & BR23. The internal consistency, Cronbach's alpha, was .78, and reliability of the subscales ranged from .61 to .79. Conclusion: The results of this study suggest that the SESSM-B is an easy, reliable, and valid instrument to measure self-efficacy for self-management of breast cancer.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.1
• /
• pp.35-42
• /
• 2015

Although the interest for earth architecture has been expanded and settled as a part of modern architecture, precisely calculating the ratio of water content in practice is still difficult and the calculation is based on empirical analysis yet. This causes many problems in durability and maintenance of earthen architecture. Therefore, this study investigated to find the easiest way to correctly calculate the appropriate level of water content ratio (AWCR), which can be used in practice. Until now, the workers have checked the AWCR based on their own experience with popular but vague manuals. On this awareness, we studied the several testing methods and found the dropping test which uses the pattern of shape after the sample is dropped. In this point, we studied and developed the definite testing method in terms of process, and shape discrimination. Also we suggest the test recording sheet by using the cobalt chloride($CoCl_2$) whose color is instantly changed when contacts with the moisture. It is believed that this result can help improving the quality and durability of the earthen architecture using the rammed earth method and the efficiency in practice.

• Journal of Energy Engineering
• /
• v.11 no.1
• /
• pp.18-25
• /
• 2002

One of the most serious concern in nuclear power plant piping maintenance is thickness reduction due to flow-accelerated corrosion (FAC). Since the FAC occurs under specific conditions of pH, dissolved oxygen, temperature, flow velocity, steam quality of the fluid and materials and geometry of the piping, a systematic approach is required for managing the FAC problem. In this study, construction of a secondary piping database, analyzing the FAC rate using the database and predicting the residual life was performed for a domestic CANDU nuclear power plant. Also FAC mechanism and factors affecting FAC were reviewed. By showing a case study on analysis for a pipe line between a separator and a flash tank, a procedure for managing FAC problem is suggested. The procedure proposed in this paper can be widely applied to the secondary piping of other domestic nuclear polder plants.

• Economic and Environmental Geology
• /
• v.40 no.6
• /
• pp.815-825
• /
• 2007

This study analyzed trends in geoscientific research funding provided by the Korea Science and Engineering Foundation (KOSEF) and examined strategies to promote geoscientific research. The strengths of geoscientific research in South Korea include the excellent academic quality of researchers, established research infrastructure, and inter-disciplinary research. Weaknesses include insufficient leadership in related societies and institutes, insufficient research productivity, and the exclusion of the field from nationally supported large-scale research projects. Opportunities for expanded research include environmental issues, the sustainable use of natural resources, the promotion of international research cooperation, and the initiation of national efforts to find solutions for regional problems. However, growth in the geosciences is threatened by prioritized investment in fields such as biotechnology, nanoscience, and information technology, a dismissive attitude toward the growth of basic sciences, and an increased demand for projects with visible economic and societal impacts. In terms of funding, group-based programs receive more support than individual-based programs. Between 1978 and 2006, KOSEF invested 1,744 billion won ($1.873 billion US) in a total of 46,748 basic research projects. Of this amount, 62.1 billion won ($66.7 million US) was allocated to 1,901 projects in the geosciences, which was roughly 2.6-10.6% of the money available in a given year. These funds were used to support research and development, the development and maintenance of necessary infrastructure, and the education and training of geoscientists.