• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.11
• /
• pp.1202-1213
• /
• 2009

Muffler sound quality of a vehicle has widely been evaluated using commercial softwares. However, the commercial softwares are providing only simple sound quality index. To get better sound quality evaluation method of the muffler, a new approach is suggested based on the subjective sound quality test. The suggested subjective sound quality evaluation method is refined with the fuzzy theory. The developed method is applied for the evaluation of various kinds of vehicle muffler sounds.

• Journal of Korean Society on Water Environment
• /
• v.28 no.4
• /
• pp.615-623
• /
• 2012

In this study, we evaluate the corrosion indexes (CI) such as Langelier Index (LI), Larson ratio (LR), Ryznar saturation index (RSI), Aggressiveness index (AI) of water quality for raw water, treated water and water in distribution reservoir at major eight drinking water treatment plants (DWTPs) in Korea. By analyzing secondary contamination of tap water, the variation of secondary contaminants was investigated with regard to pipe materials, aging and corrosion index (CI). In addition, we suggested an appropriate CI applicable water quality and the management plan for CI monitoriing. All CI showed corrosive water quality, and they did not change significantly in the distribution network. However, Copper (Cu), iron (Fe) and zinc (Zn) concentrations as secondary contaminants increased through the distribution network. Among CI, LI was most sensitive to changes in raw water quality and drinking water treatment. Also, it has high correlations with other indexes such as RSI, AI. Therefore, LI is considered as an appropriate CI to the domestic water quality. Based on these result, we propose LI as a drinking water quality standard to control the pipe corrosion from DWTPs.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2012.06a
• /
• pp.113-116
• /
• 2012

The ignition quality in diesel engines is one of the most important factors influencing their performance. While the ignition quality of distillation fuels is judged with Cetane Number, Cetane Index, and Diesel Index, that of residual fuels blended with distillation fuels is done by using CCAI. Since the 1980s, because of the development in the blending technology and the complexity, it has been difficult to make a judgement on the ignition quality of the fuels with CCAI. Hence, in order to solve the problems, it is ECN that researchers are studying in depth. In this paper, After reviewing the values such as Cetane Number, Cetane Index, Diesel Index, CCAI, and CII, we will introduce ECn and predict the possibility of using it.

• Journal of radiological science and technology
• /
• v.43 no.2
• /
• pp.115-121
• /
• 2020

In a digital radiation system using a Flat Panel Detector, we attempted to the quality control of digital radiography system using the Exposure Index and Deviation Index. Calibration was performed with the radiation quality suggested by the International Electrotechnical Commission, and through an experiment using a phantom, appropriate inspection radiation conditions applicable to medical institutions were selected. The study was conducted using the selected radiation conditions. Through those chest posterior anterior image, information such as examination conditions and exposure index was obtained. The deviation index was derived by analyzing the exposure index based on the target exposure index calculated by the phantom study. As for the analyzed exposure index, 97.1% was distributed within the range of ± 2.0 based on the deviation index. Quality control of medical images should be performed through management of inspection conditions through exposure index and deviation index and management of medical images.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.2
• /
• pp.560-569
• /
• 2017

With a remarkable and rapid change of universities in Korea, the role of universities has been changed from a traditional education supplier to a demander. Both the remarkable decrease of the number of entering students and the advent of an open education market are enforcing the universities to be changed. Universities should provide a variety of educational services in accordance with the students' needs. This study is based on the systematical Kuh's model which the educational service quality provide a decision making of alternative plan. This research is purposed to empirically study the effects of educational service quality(circumstance index, input index, participate index, output index) provided by universities on student satisfaction and educational performance(Perceived usefulness, Education Achievement). The results of this research follows; first, circumstance index, input index and output index significantly effect student satisfaction, but participate index does not effect satisfaction. Second, student satisfaction significantly effects on the educational performance.

• Journal of Environmental Science International
• /
• v.28 no.12
• /
• pp.1071-1083
• /
• 2019

In this study, water quality levels were classified and water quality indices were calculated and analysed by using the water quality components of living environmental standards monitored 10 years (2008 ~ 2017) at four stations in the West Nakdong River. As a result of analyzing the monthly variation of the water quality components of the living environmental standards, the water quality in the West Nakdong River was worse downstream than upstream, and pollution at the WNR3 located in the downstream of the Jomangang was the most serious. As a result of classification of water quality levels, BOD and COD levels were the lowest, so water quality pollution in the West Nakdong River was found to be highly influenced by organic matters. The water quality index was the lowest in July and August at four stations, so water quality is showing the worst in summer. As a result of analyzing the correlation between the water quality components and the water quality index, the correlation between the TOC and the water quality index was high in the four stations, and the water quality index in the West Nakdong River was dominated by organic matters and nutrients.

• Journal of Korean Society for Quality Management
• /
• v.45 no.2
• /
• pp.261-274
• /
• 2017

Purpose: Classify quality assurance work for munitions as service quality attributes. And to derive service elements that need improvement to improve customer satisfaction through calculation of customer satisfaction coefficient. Methods: The quality assurance service for munitions is classified as service quality based on the Kano model through a questionnaire survey of workers in military service companies located in Busan and Kyung-nam areas. Investigate current customer satisfaction with service quality of defense quality assurance activites, and calculate customer satisfaction coefficient and potential customer satisfaction improvement index. Results: Identify current satisfaction levels for service quality of defense quality assurance activites and suggest service quality factors that should be improved to improve customer satisfaction. Conclusion: The service quality factor for the defense quality assurance service was classified into 13, and the customer satisfaction coefficient was lower than the satisfaction coefficient. When looking at the current level of customer satisfaction through the Potential Customer Satisfaction Index, attractive quality factors with PCSI indices were found to be necessary for service improvement.

• Journal of Korean Society for Quality Management
• /
• v.32 no.2
• /
• pp.212-231
• /
• 2004

It is very important to produce military goods for customers, and a customer satisfaction index should be developed for quality control of military goods. Seoul National University and Defense Quality Assurance Agency jointly developed MCSI (Military Customer Satisfaction Index). In this paper the model of MCSI is explained, and the sampling design and survey method is introduced. Also a preliminary test was undertaken, and its result is briefly explained.

• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.9-14
• /
• 2002

In front of the opening of electric distribution market in 2004. it is indispensable to have a proper estimation of power quality index and power quality cost calculation mechanism are indispensable to stabilize highly industrialized society and to vitalize the investment for electric power system. However, there were not enough measures to reflect the voltage characteristics such as voltage sags and interruptions which make electric load in unstable operation. This paper suggests power quality index(LDI) and power quality cost(LDC) which translate various kinds of voltage records into load drop index and cost based on aggregated load CBEMA curve. A sample calculation result shows that this method can produces the acceptable power quality index and costs for utilities and customers requirements.

• Asian Journal of Atmospheric Environment
• /
• v.9 no.2
• /
• pp.101-113
• /
• 2015

Air quality index (AQI) or air pollution index (API) is commonly used to report the level of severity of air pollution to public. A number of methods were developed in the past by various researchers/environmental agencies for determination of AQI or API but there is no universally accepted method exists, which is appropriate for all situations. Different method uses different aggregation function in calculating AQI or API and also considers different types and numbers of pollutants. The intended uses of AQI or API are to identify the poor air quality zones and public reporting for severity of exposure of poor air quality. Most of the AQI or API indices can be broadly classify as single pollutant index or multi-pollutant index with different aggregation method. Every indexing method has its own characteristic strengths and weaknesses that affect its suitability for particular applications. This paper attempt to present a review of all the major air quality indices developed worldwide.