• Industrial Engineering and Management Systems
• /
• v.13 no.2
• /
• pp.231-249
• /
• 2014

This paper discusses a green supply chain with a manufacturer and a collection trader, and it proposes an optimal production planning for remanufacturing of parts in used products with quality classification errors made by the collection trader. When a manufacturer accepts an order for parts from a retailer and procures used products from a collection trader, the collection trader might have some quality classification errors due to the lack of equipment or expert knowledge regarding quality classification. After procurement of used products, the manufacturer inspects if there are any classification errors. If errors are detected, the manufacturer reclassifies the misclassified (overestimated) used products at a cost. Accordingly, the manufacturer decides to remanufacture from the higher-quality used products based on a remanufacturing ratio or produce parts from new materials. This paper develops a mathematical model to find how quality classification errors affect the optimal decisions for a lower limit of procurement quality of used products and a remanufacturing ratio under the lower limit and the expected profit of the manufacturer. Numerical analysis investigates how quality of used products, the reclassification cost and the remanufacturing cost of used products affect the optimal production planning and the expected profit of a manufacturer.

• Journal of Korean Society for Quality Management
• /
• v.41 no.2
• /
• pp.209-220
• /
• 2013

Purpose: This paper compares and discusses the influence on the quality classification of Kano's questionnaire which is used for the Kano model(Kano et al., 1984), the 3-point Likert-scale newly proposed by Kano and the 5-point Likert-scale presented in this study. Methods: For the comparison, the current study conducts a survey of 631 television viewers. The classification results of the three methods are then compared with those of direct classification which is adopted as a standard for classification of quality attributes. Results: The agreement rates between the results using conventional Kano's questionnaire and the results using direct classification is higher than the results using 3-point and 5-point Likert-scales. In addition, the attributes grouped as must-be or attractive in the direct classification appear to be classified as one-dimensional attributes in the Likert-scales. Conclusion: In comparison with the convensional Kano's questionnaire, the Likert-scale questions highly tend to classify the quatity attributes as one-dimensional. Although the classification results of the 3-point and 5-point Likert-scales are the same, the 5-point Likert-scale has the advantage to classify quality attributes in more detail.

• Smart Media Journal
• /
• v.7 no.4
• /
• pp.37-43
• /
• 2018

Most of fruit quality classification has been done by time consuming, inaccurate and intensive manual labor. This study proposed an automated fruit grading system based on appearances and internal flavors. In this study, image processing technique and a weight checker were used to measure the value of appearance features and the near infrared spectroscopy analysis method was used to estimate the value of internal flavors. Additionally, I suggested 8x8x5x5 ANN based fruit quality classifier model to grade fruits quality. The proposed automated fruit quality classification system is expected to be very beneficial for many farms where heavy manual labor is usually needed for fruit quality classification.

• Quality Improvement in Health Care
• /
• v.10 no.2
• /
• pp.204-215
• /
• 2003

Background : ICD-10 Classification, which is used domestically as well as internationally, has limited use in the clinical practice since it is developed for at disease statistics and epidemiology. Therefore, the purposes of this study were to improve the quality of diagnosis by constructing a new disease classification based on the diagnoses doctors currently make in the clinical setting and connecting this classification with OCS and EMR, and to meet the demands of doctors for high quality medical study data in medical research. Methods : The specialists in each ophthalmic subfield collected clinical diagnoses and abbreviations based on the ophthalmology textbooks and confirmed the classifications. Total number of clinical diagnoses collected was totaled 672, for which ideal diagnoses had been selected and a new model of disease classification model in connection with ICD-10 was constructed. The constructed classification of clinical diagnoses consisted of six steps: the first step was the classification by ophthalmic subspecialty field; the second to fifth steps were the detailed classification by each specialty field; the sixth step was the classification by site. Results : After introducing the new disease classification, research on the use and a pre-post comparison was conducted. The result from the research on the use of the clinical diagnoses in inpatient and outpatient care has shown a gradually increasing tendency. From the pre-post comparison of EMR discharge summary diagnoses, the result demonstrated that the diagnosis was stated correctly and in detail. Since the diagnosis was stated correctly, code classification became correct as well, which makes it possible to construct high quality medical DB. Conclusion : This construction of clinical diagnoses provides the medical team with high quality medical information. It is also expected to increase the accuracy and efficiency of service in the department of medical record and department of insurance investigation. In the future, if hospitals wish to construct a classification of clinical diagnosis and a standard proposal of clinical diagnosis is presented by a medical society, the standardization of diagnosis seems to be possible.

• International Journal of Quality Innovation
• /
• v.2 no.2
• /
• pp.24-33
• /
• 2001

As we know, the quality of processes is technically depicted by variation, a product or process with the best quality must naturally require the variation as less as possible. The variation is usually reduced with many ways, say, by adjusting parameters settings under robust design with many turns expensive experiments. So ones are trying to reach the robustness by detecting cheap and simple methods. In this paper, a both practical and simple technique for quality improvement, namely reducing the variation, by data classification is studied. First, all possible system factors are included, which may dominate the variation law. And then we make use of the past observations and their classification as well as boxplot charts to find out the internal rule between the variation and the system factor. Next, adjust the location of the system factor according to the rule so that the variation could, to some extent, be lessened. Finally, two typical quality improvement cases based on data classification are presented.

• Journal of Korean Society for Quality Management
• /
• v.40 no.4
• /
• pp.453-466
• /
• 2012

Purpose: The Kano model has been widely accepted as a method for classifying quality attributes for almost three decades since its introduction. However, the wordings of the five alternatives in the Kano's questionnaire has been criticised for unclear and confusable meanings. New wordings of the five alternatives are proposed in this paper. Methods: To evaluate the effectiveness of the proposed wordings, we classify 30 quality attributes of smartphones using the conventional wordings and the proposed wordings respectively. The two classification results are compared with the direct classification results by undergraduate students who learned the Kano model. Results: The classification results using the proposed wordings are much more consistent with the direct classification results than those using the conventional wordings. Conclusion: The proposed wordings are less confusable and easy to understand, and thus it results in more consistent with the direct classification.

• KIISE Transactions on Computing Practices
• /
• v.20 no.12
• /
• pp.676-681
• /
• 2014

In order to discern and classify high-quality slides, our research proposes a classification method that utilizes a knowledge structure containing information on the presentation slides. After analyzing whether our knowledge structure captures the content's quality information, we developed a classification method based on the knowledge structure produced from the analysis results. With the proposed method, we compared results classified by quality of presentation slides. Through this comparison, we verified that the slides in the high quality group could be classified and were able to retrieve high quality slides. The results show that, by utilizing the cognitive model of a knowledge structure, our method can increase the effectiveness of classification when search or recommendation is conducted mainly with high-quality slides.

• Journal of Information Processing Systems
• /
• v.15 no.1
• /
• pp.116-126
• /
• 2019

In this paper, an improved one-against-one support vector machine algorithm is used to classify multiple power quality disturbances. To solve the problem of parameter selection, an improved particle swarm optimization algorithm is proposed to optimize the parameters of the support vector machine. By proposing a new inertia weight expression, the particle swarm optimization algorithm can effectively conduct a global search at the outset and effectively search locally later in a study, which improves the overall classification accuracy. The experimental results show that the improved particle swarm optimization method is more accurate than a grid search algorithm optimization and other improved particle swarm optimizations with regard to its classification of multiple power quality disturbances. Furthermore, the number of support vectors is reduced.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.2
• /
• pp.309-319
• /
• 2016

This paper presents a new recognition and classification method for power quality (PQ) disturbances on the basis of pattern linguistic values. This method solves the difficulty of recognizing disturbances rapidly and accurately by using fuzzy logic. This method uses classification disturbance patterns to define the linguistic values of fuzzy input variables and used the input variables of corresponding disturbance pattern to set membership functions. This method also sets the fuzzy rules by analyzing the distribution regularities of the input variable values. One characteristic of this method is that the linguistic values of fuzzy input variables and the setting of membership functions are not only related to the input variables but also to the character of classification disturbance and the classification results. Furthermore, the number of fuzzy rules is equal to the number of disturbance patterns. By using this method for disturbance classification, the membership function and design of fuzzy rules are directly related to the objective of classification, thus effectively reducing the complexity of the design process and yielding accurate classification results. The classification results of the simulation and measured data verify the feasibility and effectiveness of this method.

• Journal of Korean Society for Quality Management
• /
• v.23 no.2
• /
• pp.53-67
• /
• 1995

The problem considered here is to find the optimal discriminant analysis method in growth curve model. It has been studied how to find correct prior probability for the effective classification in discriminant analysis. We use the balanced condition to calculate prior probability. From the informative simulation study, new classification rule for the growth curve model is suggested. The suggested classification rule has better classification result than the other previously suggested method in terms of error rate criterion.