• 한국소음진동공학회논문집
• /
• 제15권8호
• /
• pp.945-953
• /
• 2005

The purpose of this paper is to develop a linear regression model for the sound quality index of vehicle Interior noise. For this, objective measurement data of the vehicles driving in acceleration was measured. On the basis of analysis, psychoacoustic parameters were extracted and subjective evaluation was performed by noise and vibration expert evaluators. For the subjective evaluation, the paired comparisons and the semantic differential methods were used to evaluate sound quality of vehicle interior noise. By the paired comparison which evaluate two pairs of vehicle interior noise, the preference was estimated. With the semantic differential and the factor analysis, it was evaluated words of two pairs which expressed appropriately the sense of evaluator about noise source. Therefore the characteristics of the sound qualify for the vehicle were differentiated. From the results of both the correlation analysis and the multiple factor regression analysis, the sound quality evaluation model for the sense of human hearing was derived and indexed.

• 콘크리트학회논문집
• /
• 제17권1호
• /
• pp.157-166
• /
• 2005

This article involves architecting prototype-fuzzy expert system for designing the nominal cover thickness by means of fuzzy inference for quantitatively representing the environment affecting factor to reinforced concrete in chloride-induced corrosion environment. In this work, nominal cover thickness to reinforcement in concrete was determined by the sum of minimum cover thickness and tolerance to that defined from skill level, constructability and the significance of member. Several variables defining the quality of concrete and environment affecting factor (EAF) including relative humidity, temperature, cyclic wet and dry, and the distance from coast were treated as fuzzy variables. To qualify EAF the environment conditions of cycle degree of wet-dry, relative humidity, distance from coast and temperature were used as input variables. To determine the nominal cover thickness a qualified EAF, concrete grade, and water-cement ratio were used. The membership functions of each fuzzy variable were generated from the engineering knowledge and intuition based on some references as well as some international codes of practice.

• 한국전기전자재료학회논문지
• /
• 제17권3호
• /
• pp.340-347
• /
• 2004

Ultra-small size, high-performance, solenoid-type RF chip inductors utilizing low-loss A1$_2$O$_3$ core materials were investigated. The dimensions of the RF chip inductors fabricated were 1.0mm${\times}$0.5mm${\times}$0.5mm and copper coils were used. The materials (96％ A1$_2$O$_3$) and shape (I-type) of the core, the diameters (40${\mu}{\textrm}{m}$) and position (middle) of the coil, and the lengths (0.35mm) of solenoid were determined by a high-frequency structure simulator (HFSS) to maximize the performance of the inductors. The high-frequency characteristics of the inductance (L) and quality-factor (Q) of the developed inductors were measured using a RF impedance/material analyzer (E4991A with E16197A test fixture). The developed inductors exhibit an inductance of 11 to 11.3nH and a qualify factor of 22.3 to 65.7 over the frequency ranges of 250 MHz to 1.7 GHz, and show results comparable to those measured for the inductors prepared by Coilcraft$^{TM}$. The simulated data described the high-frequency data of the L and Q of the fabricated inductors well.

• 품질경영학회지
• /
• 제37권1호
• /
• pp.20-28
• /
• 2009

This study was designed to examine the existing studies on Balanced Score Card(BSC) which is being spot-lighted as the performance system in hotel industries. In addition, this study also examines the effects of BSC on service qualities when applied in service industries. Services business have different features from other manufacturing industries and also highly value the importance of service quality as a factor which can directly affect the performance in service industries. Therefore, the performance system measuring service Qualify need to be developed in terms of BSC. This study is to prove the need of strategic approach to achieve improvements in service quality using BSC. For this study, Statistical similarities were used to prove the interrelationship between service quality and four factor in BSC. However, there was a limit on the statistical and study model. To overcome the problems, more related studies need to be followed up for a general use.

• 한국전기전자재료학회논문지
• /
• 제18권6호
• /
• pp.532-537
• /
• 2005

In order to develop a tunable resonator which can be easily operated by DC bias and applied for microwave tunable filters and devices using ferroelectric thin or thick films, the non conductor backed-and conductor backed- coplanar stripline resonators have been designed and analyzed. They have been designed to be operated at 25 GHz which involve coplanar stripline input and output ports. The resonators have been simulated and analyzed using Ansoft HFSS. The research has been focused on the Quality factor of the coplanar stripline resonator. The conductor Q, box Q, and radiation Q of the resonators have been analyzed and calculated according to the substrate thickness & conductor width of the resonators. From these parameters, the loss factors of the coplanar stripline resonator have been investigated. The conducting Q of the coplanar stripline resonator has no relation with the thickness of dielectric substrate and increases as the conductor width increases. The box Q has no much relation with the thickness of substrate and the conductor width, which is above 2000. The radiation loss increases as the thickness of substrate and the conductor width increase. To decrease the radiation loss of the coplanar stripline resonator, a conductor backed coplanar stripline resonator has been proposed which has the unloaded Q of 170.

• 한국물환경학회지
• /
• 제25권4호
• /
• pp.494-501
• /
• 2009

Probabilistic Ecological risk assessment (PERA) is extensive approach to qualify and quantify risk on the multi species based on species sensitivity distribution (SSD). As a while, deterministic ecological risk assessment (DERA) considers the comparison of predicted no-effect concentration (PNEC) and predicted exposure concentration (PEC). DERA is used to determine if there is potential risk or no risk, and it doesn't consider the nature variability and the species sensitivity. But PERA can be more realistic and reasonable approach to estimate likelihood or risk. In this study, we compared PERA used in developed countries, and proposed PERA applicable for the Korean water environment. Taxonomic groups were classified as "class" level including Actinopterygill, Branchiopoda, Chlorophyceae, Maxillapoda, Insects, Bivalvia, Gastropoda, Secernentea, Polychaeta, Monocotyldoneae, and Chanophyceae in this study. Statistical extrapolation method (SEM), statistical extrapolation method $_{acutechronicratio}$ ($SEM_{ACR}$) and assessment factor method (AFM) were used to calculate the ecological protective concentration based on qualitative and quantitative levels of taxonomic toxicity data. This study would be useful to establish the PERA for the protection of aquatic ecosystem in Korea.

• 한국전기전자재료학회논문지
• /
• 제16권12S호
• /
• pp.1195-1199
• /
• 2003

In this study, in order to develop the low temperature sintering ceramics for multilayer piezoelectric transformer, dielectric and piezoelectric properties of PSN-PZT[0.91Pb(Sb$\sub$1/2/Nb$\sub$1/2/)$\sub$0.03/(Zr$\sub$0.495/Ti$\sub$0.505/)$\sub$0.97/O$_3$-0.04Pb(Ni$\sub$1/2/W$\sub$1/2/)O$_3$+0.05BiFeO$_3$+0.3wt％MnO$_2$+0.6wt％CuO〕 ceramics were investigated according to Zr/Ti ratio. As Zr/Ti ratio is increased, electromechanical coupling factor(k$\sub$p/) and dielectric constant increased and then decreased after the ratio of Zr/Ti=50/50. Also, mechanical qualify factor(Q$\sub$m/) decreased and then increased after the ratio of Zr/Ti=50/50.

• 근관절건강학회지
• /
• 제9권2호
• /
• pp.166-176
• /
• 2002

The purpose of this study was done to identify analysis study quality of life in home stayed arthritis patients. The subject for this study were 56 arthritis patients in K city and boundary area resident, and period of data collection was from July, 2000 to November, 2000. The results are as follows. 1. Mean score of Quality of life was $171.13{\pm}44.08$(range from 66 to 244), Mean score of depression was $36.71{\pm}12.11$(range from 18 to 64), score of social support was $3.96{\pm}5.30$(range from 0 to 19), and score of stress was $322.80{\pm}34.18$(26 to 2316). 2. Main demographic factor influenced upon quality of life was age, sex, educational level and marital status, and main Physical factor influenced upon qualify of life was height, systolic and diastolic blood pressure. 3. Quality of life was correlated negatively with depression, and positively social support. 4. quality of life in home arthritic patient was explained 68% by depression, age and social support. In conclusion, nursing intervention of arthritic patient in home considers age, social support and depression in order to promote quality of life.

• 한국전기전자재료학회논문지
• /
• 제16권3호
• /
• pp.202-206
• /
• 2003

In this study, modified PbTi $O_3$ ceramics was manufactured to apply for 30MHz SMD type ceramic resonator with the variations of electrode weight. To investigate the effects of electrode weight on resonant characteristics of ceramic resonator using 3$^{rd}$ overtone thickness vibration mode, ceramic wafers for resonator were fabricated by evaporating electrode weights of 0.66, 1.765, 2.32, 3.87$\times$ 10$^{-4}$ g/c $m^2$ with silver, respectively. And then, SMD type ceramic resonators were fabricated with the size of 3.7$\times$3.1mm and electrode radius size of 0.77mm. With increasing electrode weight, resonant resistance was gradually decreased. At the electrode weight of 2.32$\times$10$_{-4}$ g/c $m^2$, mechanical quality factor( $Q_{mt3}$) and dynamic range(D.R) showed the maximum value of 2,152 and 49dB, respectively.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 추계학술발표회 논문집
• /
• pp.397-402
• /
• 2003

This study is aimed to improve the quality of image fusion results through shadow effects correction. For this, shadow effects correction algorithm is proposed and visual comparisons have been made to estimate the quality of image fusion results. The following four steps have been performed to improve the image fusion qualify First, the shadow regions of satellite image are precisely located. Subsequently, segmentation of context regions is manually implemented for accurate correction. Next step, to calculate correction factor we compared the context region with the same non-shadow context region. Finally, image fusion is implemented using collected images. The result presented here helps to accurately extract and interpret geo-spatial information from satellite imagery.