• Journal of Korean Society for Quality Management
• /
• v.41 no.3
• /
• pp.433-441
• /
• 2013

Purpose: This study investigates software qualification procedures based on the FA-50 flight control software to satisfy high reliability and flight safety. Methods: We studied software qualification categories, standard/specification and developed country case. We proposed procedure to satisfy not only flight safety but also international standard. Results: The proposed software qualification procedure satisfied flight safety and airworthiness based on the testing result of the FA-50 flight control software. Conclusion: This paper showed an appropriate qualification procedures of the flight control software in domestic circumstance through the FA-50 flight control software qualification.

• Journal of Engineering Education Research
• /
• v.19 no.1
• /
• pp.47-53
• /
• 2016

New occupational qualification system built on NCS(National Competency Standard) aimed to induce industries, the final appliers of qualification, to play a leading role in designing qualification and to spontaneously apply such qualification standard to employment and promotion so as to reinforce universality of qualification. In this study, we verified the validity of NCS level of qualification categories for 130 occupational fields by redesigning NCS-based new occupational qualification system with a focus on 7 major areas, including mechanical field, which were found to have wide-ranging social ripple effect throughout society and high acceptability in 2014. The results of study on suitability at qualification level suggested the followings: First, there is a difference in number of competency units for each qualification category, depending on area. New qualification covering 7 major areas included 15.3 competency units for each qualification category, which exceeds the number of competency units(about 10 units) in subdivided NCS. By field, some difference was found with 7.9 competency units for cultural field and 22.6 competency units for information and communication area. Second, preference above normal level was observed in the criteria, procedure and method for determining qualification redesigning. However, preference below normal level was exhibited in connection with possibility of linkage with overseas qualifications, although preference was above normal level in relation to the suitability of design/qualification level and qualification categories based on lifelong career development path within scope of NCS as the criteria for determining the redesign of qualification categories. Second, we compared NCS level and SC(Sector Council level, and the results showed that NCS level was found to be somewhat well-defined. For the qualifications with different definitions, it was deemed difficult to determine superiority between NCS level and SC level. However, majority opinion indicated that it would be desirable to follow NCS level because NCS was created through collection of opinions for a prolonged period.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.1
• /
• pp.75-82
• /
• 2008

National technical qualification does not recognised degree of working-career in labor market and an industrial field situation. National qualification is supply to nurture expert manpower and accomplish of self-development and a duty accomplishment ability improvement at a side of personal. So, This study is purposed to find that a method for recognition of working-career on the national technical qualification system According to, this study is designed to questionnaire with BSC(Balaced ScoreCard), SEM(Structure Equation Model) with the delphi method, and is analysed using the AMOS 7.0 program package. Finally, This study is suggested growing to qualification standard for an examination a degree of master craftsman only under the change of national qualification systematization as a standard to operation and control.

• Proceedings of the Safety Management and Science Conference
• /
• 2008.11a
• /
• pp.275-285
• /
• 2008

National technical qualification does not recognised degree of working-career in labor market and an industrial field situation. National qualification is supply to nurture expert manpower and accomplish of self-development and a duty accomplishment ability improvement at a side of personal. So, This study is purposed to find that a method for recognition of working-career on the national technical qualification system. According to, this study is designed to questionnaire with BSC(Balaced ScoreCard), SEM(Structure Equation Model) with the delphi method, and is analysed using the AMOS 7.0 program package. Finally, This study is suggested growing to qualification standard for an examination a degree of master craftsman only under the change of national qualification systematization as a standard to operation and control.

• Quality Improvement in Health Care
• /
• v.21 no.1
• /
• pp.12-31
• /
• 2015

Objectives : The purpose of this study was to develop the qualification system for training of Quality improvement professionals who work for improving patients' safety and healthcare quality. Methods : Based on the various laws and regulations, and the operational status of other professionals' qualification systems, a basic plan of professional qualification system of QI was drawn. And through meetings with QI experts, the final scheme of the concrete qualification system was developed. Results : For management of professionals's certification or qualification, fairness and reliability are important. To do this, setting the official standard, providing a standardized training program and having appropriate qualification test are required. In order to operate the qualification system strategically, 1) the introduction step, 2) dissemination and expansion step, and 3) fusing step should be considered. As a governing body for QI specialists' qualification, 'QI professionals' qualification Center (tentative)' must have the committee to assure fairness, professionalism, and reliability. In addition, 'QI Experts Certification Department (tentative)" to develop standards for the qualification tests and conduct the tests program,' QI experts Education Department (tentative name)" must be able to operate and maintain the QI training for professional qualifications. QI professional qualification exam must be taken by everyone regardless of age, gender, race, occupation, education, and work experience. The examination should include management, leadership, strategic planning and design, quality management, health care information, patient safety culture. Practical training courses can have three step programs; beginning, intermediate and special level. Conclusion : The QI qualification system need strategic approaches for the experts working for healthcare quality improvement and patient safety. It should include the program of standardized contents and test, and operating protocol of the qualificaton system.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.3
• /
• pp.9-14
• /
• 2015

The study is conducted in order to establish validity of industrial safety field's neo-qualification composition by suggesting reengineering procedure of NCS based industrial safety field's qualifying occupational plan. Industrial safety fields are first classified into great classification which are environment energy safety, and then into sub-classification which are industrial safety management, industrial health management, and nondestructive test. NCS based neo-qualification plan is deveopled into progress as following steps; First, planning NCS neo-qualification system. Second, presenting work education combined program certification standard. Third, developing NCS based neo-qualification assessment standard. Fourth, developing work education qualification prototype problem. The process of qualification plan was composed with Worksheet 14 and with 4phase being completing summary of each section, certification and development of assessment standard, and development of prototype problem. As a result, Industrial safety manager was redesigned into Industrial sfety manager and Construction Safety Manager, and Occupational Health Care Manager was redesigned into Occupational Health Care Manager and Industrial Health Manager. This study, in conclusion, suggests development of qualifying occupation that could be applied to the integrated management system and development of future industrial safety field's specialized neo-qualifying occupation.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.13 no.3
• /
• pp.15-22
• /
• 2014

Proceeded with a research with basic data about the qualification standard improvement scheme about the environment school architecture in which a comparison analyze the specialized field of BREEAM system of LEED of the hit environment building qualification standard G-SEED of the domestic and U.S Green Building Counci evaluated with the certification system of the world top class and Building Research Establish, essential item, and mark distribution and weight in this study at this and which I hit with a domestic afterward. The school facility with a hub among the equipment receiving the hit environmental qualification standard, and the range of this research does LEED of the domestic green building certification system February is revised in 2013 G-SEED and which US and BREEAM in UK with a range. The way of the research checked the environment school building certification system and situation hit home and abroad, and a comparison analyze the division of the specialized field of each country qualification standard, essential item, and mark distribution and weight.

• Journal of Applied Reliability
• /
• v.16 no.2
• /
• pp.125-133
• /
• 2016

Purpose: The purpose of this study is to evaluate durability of platform safety step system in railway. Method: We performed finite element analysis & durability analysis of platform safety step system with VPD (Virtual Product Development) techniques and examined the durability standard & qualification life through the rig test during no failure test time in reliability qualification test. We continued to test 1 million cycles in KRS (Korea Railway Standard) for system's robust design performance. Result: FEM analysis results are 14.9MPa & 14.7MPa of pin-joint, pivot and durability analysis result is above 1 million cycles. we calculated theoretically no failure test time 855,000 cycles and through the 1 million cycles durability rig test in KRS standard we confirmed product quality. Conclusion: This platform safety step system was designed very safe in terms of a mechanical strength & durability.

• The Journal of Society for e-Business Studies
• /
• v.13 no.1
• /
• pp.55-69
• /
• 2008

In order to promote software industry, it is essential to train and utilize specialized software human resources in the industry. It is required to establish an appropriate qualification system for the industry in order to train and utilize the qualified human resources. The current national qualification system in the IT area cannot cope with the development of software industry and does not provide various qualifications required to the software workers. We analyze the problems of the current national qualification system for the software industry and propose a framework for improving the qualification system. Based on the review of the software skill standard and a range of technology levels, we suggest a new integrated qualification system that provides a variety of qualifications for various software skills at various levels. Also we propose policy alternatives for institutionalizing the new qualification system.

• International Journal of Aerospace System Engineering
• /
• v.10 no.1
• /
• pp.14-24
• /
• 2023

The materials applied to the aircraft fuselage, parts, and components must be verified by relative authorities in accordance with the procedures set by the airworthiness authority to achieve the aircraft type certification. There are no examples of domestic composite materials which were verified in order to be applied to aircraft structure. In this study, the composite material certification system of NCAMP, an American composite material standard certification organization, was reviewed and used as the fundamentals of the first aerospace composite material certification system in ROK(Fig 2,8). Also updated material certification documents were developed and confirmed by material certification engineers and inspectors. This aerospace composite material qualification system is intended to modernize the material certification system for AAM(Advanced Air Mobility) as well as aircraft and to enhance the understanding of related technicians and inspectors.