• Asian-Australasian Journal of Animal Sciences
• /
• 제27권12호
• /
• pp.1744-1748
• /
• 2014

A dose-response experiment with seven supplemental pyridoxine levels (0, 0.66, 1.32, 1.98, 2.64, 3.30, and 3.96 mg/kg) was conducted to investigate the effects of pyridoxine on growth performance and plasma aminotransferases and homocysteine of White Pekin ducks and to estimate pyridoxine requirement for these birds. A total of 336 one-day-old male White Pekin ducks were divided to 7 experimental treatments and each treatment contained 8 replicate pens with 6 birds per pen. Ducks were reared in raised wire-floor pens from hatch to 28 d of age. At 28 d of age, the weight gain, feed intake, feed/gain, and the aspartate aminotransferase, alanine aminotransferase, and homocysteine in plasma of ducks from each pen were all measured. In our study, the pyridoxine deficiency of ducks was characterized by growth depression, decreasing plasma aspartate aminotransferase activity and increasing plasma homocysteine. The ducks fed vitamin $B_6$-deficient basal diets had the worst weight gain and feed/gain among all birds and this growth depression was alleviated (p<0.05) when pyridoxine was supplemented to basal diets. On the other hand, plasma aspartate aminotransferase and homocysteine may be the sensitive indicators for vitamin $B_6$ status of ducks. The ducks fed basal diets had much lower aspartate aminotransferase activity and higher homocysteine level in plasma compared with other birds fed pyridoxine-supplemented diets (p<0.05). According to quadratic regression, the supplemental pyridoxine requirements of Pekin ducks from hatch to 28 days of age was 2.44 mg/kg for feed/gain and 2.08 mg/kg for plasma aspartate aminotransferase and the corresponding total requirements of this vitamin for these two criteria were 4.37 and 4.01 mg/kg when the pyridoxine concentration of basal diets was included, respectively. All data suggested that pyridoxine deficiency could cause growth retardation in ducks and the deficiency of this vitamin could be indicated by decreasing plasma aspartate aminotransferase activity and increasing plasma homocysteine.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권9호
• /
• pp.1263-1271
• /
• 2000

A total of 80 piglets ($5.85{\pm}0.62kg$ BW; 21 d of age) were used to study the effect of carnitine addition to extruded full-fat soybean (EFS) diets on the growth of weaned pigs. Pigs were allotted into five treatments based on body weight, in a completely randomized block design. Each treatment has 4 replicates of 4 heads each. Treatments were 1) SBM (positive control), 2) EFS without carnitine (negative control), 3) EFS with 50 ppm carnitine, 4) EFS with 100 ppm carnitine and 5) EFS with 150 ppm carnitine. During d 0 to 14, piglets were fed diets containing 3,400 kcal ME, 23% crude protein, 1.65% lysine, 0.9% Ca and 0.8% P and for the period of d 15 to 28, piglets were fed diets supplying 3,300 kcal ME, 20% crude protein, 1.55% lysine, 0.9% Ca and 0.8% P. The urease activity of EFS (0.18) were three times higher than SBM (0.07). During d 0-14, pigs fed SBM had greater ADG and ADFI compared to pigs fed extruded full-fat soybean diets (p<0.05). Feed conversion ratio was not different among treatments. No linear or quadratic effect of carnitine addition was found in growth performance. During d 15-28, piglets fed SBM diet also showed better ADG and FCR with no significant differences among treatments. Feed intake tended to increase as carnitine addition level was increased (p=0.10). For overall period (d o to 28), the best performance was observed in pigs fed SBM diet. CP digestibility was higher in pigs fed SBM diet than piglets fed EFS diet at d 14, and DM and CP digestibility tended to be higher in pigs fed SBM diet at d 28. Blood metabolites (BUN, glucose and cholesterol)were not affected by treatments. In conclusion, based on the results of this study piglets at 21 d of age appeared to be not ready for extruded full-fat soybean (FFSB) in their diets. Piglets fed extruded FFSB showed decreased growth rate compared to piglets fed SBM diet. Nutrient utilization was also poor in piglets fed extruded FFSB diets. L-carnitine addition at the level of 50 to 150 ppm was not effective in improving the growth performance of pigs fed EFS diets.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권12호
• /
• pp.1796-1802
• /
• 2017

Objective: This experiment was conducted to evaluate the optimal space allowance on growth performance, blood profile and pork quality of growing-finishing pigs. Methods: A total of ninety crossbred pigs [$(Yorkshire{\times}Landrace){\times}Duroc$, $30.25{\pm}1.13kg$] were allocated into three treatments (0.96: four pigs/pen, $0.96m^2/pig$; 0.80: five pigs/pen, $0.80m^2/pig$; 0.69: six pigs/pen, $0.69m^2/pig$) in a randomized complete block design. Pigs were housed in balanced sex and had free access to feed in all phases for 14 weeks (growing phase I, growing phase II, finishing phase I, and finishing phase II). Results: There was no statistical difference in growing phase, but a linear decrease was observed on average daily gain (ADG, p<0.01), average daily feed intake (ADFI, p<0.01), and body weight (BW, p<0.01) with decreasing space allowance in late finishing phase. On the other hand, a quadratic effect was observed on gain to feed ratio in early finishing phase (p<0.03). Consequently, overall ADG, ADFI, and final BW linearly declined in response to decreased space allowance (p<0.01). The pH of pork had no significant difference in 1 hour after slaughter, whereas there was a linear decrease in 24 h after slaughter with decreasing space allowance. Floor area allowance did not affect pork colors, but shear force linearly increased as floor space decreased (p<0.01). There was a linear increase in serum cortisol concentration on 14 week (p<0.05) with decreased space allocation. Serum IgG was linearly ameliorated as space allowance increased on 10 week (p<0.05) and 14 week (p<0.01). Conclusion: Data from current study indicated that stress derived from reduced space allowance deteriorates the immune system as well as growth performance of pigs, resulting in poor pork quality. Recommended adequate space allowance in a grow-to-finish production system is more than $0.80m^2/pig$ for maximizing growth performance and production efficiency.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권4호
• /
• pp.623-633
• /
• 2020

Objective: Substituting starch with digestible fiber (dF) can improve digestive health of rabbits and reduce costs. Therefore, it is necessary to develop a criterion for dF and starch supply. Effects of the dietary dF-to-starch ratio on pellet quality, growth and cecal microbiota of Angora rabbits were evaluated. Methods: Five isoenergetic and isoproteic diets with increasing dF/starch ratios (0.59, 0.66, 0.71, 1.05, and 1.44) were formulated. A total of 120 Angora rabbits with an average live weight of 2.19 kg were randomly divided into five groups with four replicates. At the end of 40 day feeding trial, cecal digesta were collected to analyse microbiota. Results: The results showed that the dF/starch ratio had linear effects on pellet variables (p<0.01). When the dF/starch ratio was 1.44, the pellets had the lowest powder and highest durability. The dF/starch ratio had unfavorable linear effects on growth variables (p<0.001). When analyzed by quadratic regression, the optimal dF/starch ratios for average weight gain and feed/gain were 0.59 and 0.74, respectively. There were differences in wool yield, fiber length and fiber diameter caused by the dF/starch ratio (p<0.05), and the dF/starch ratios that ranged from 0.66 to 1.06 were appropriate for good results. The cecal microbiota operational taxonomic unit (OTU) number index in the 1.05 dF/starch treatment was higher than that in the 0.66 and 0.71 dF/starch treatments. The higher dF/starch ratio resulted in a higher cecal microbiota OTU number index (p<0.05). The proportion of Ruminococcus in the 0.71 dF/starch treatment was higher than that in the 0.59 dF/starch treatment (p<0.05) Conclusion: The most suitable dF/starch ratio for feed pellet quality is 1.44, and for rabbit growth the optimal range of ratios is from 0.59 to 0.74. With combination of the wool growth, output cost, and cecal microbiota, we suggest that a dietary dF/starch ratio ranging from 0.74 to 1.06 is optimal.

• Animal Bioscience
• /
• 제34권4호
• /
• pp.680-691
• /
• 2021

Objective: This study was conducted to investigate the effect of fermented cottonseed meal (FCSM) on growth performance, carcass traits, and fat deposition in white-feather broiler chickens. Methods: A total of 480 male one-day-old white-feather broiler chickens were selected randomly and divided into four groups with six replicates of 20 chickens in each. The experimental chickens were fed diets including 3%, 6%, or 9% FCSM fermented by Candida tropicalis until 42 days old. In the experiment, the chickens of the control group were fed soybean meal. Results: FCSM supplementation linearly decreased the feed conversion ratio from d 15 to 21 and d 36 to 42, respectively (p<0.05). The percentage of carcass and semi-eviscerate increased in response to dietary FCSM supplementation at d 21 (p<0.05). The percentage of eviscerated and semi-eviscerate of 3FCSM was higher than that in other groups at d 35 (p<0.05). At the age of 42 d, the percentage of carcass increased in a quadratic way among increasing FCSM in diets (p<0.05). The subcutaneous fat thickness linearly decreased with the increasing levels of FCSM at d 21 (p<0.05). Gompertz and Logistic functions provided a better fit on abdominal fat and subcutaneous fat, respectively. The best fitted equation predicted that the maximum growth rate of abdominal fat weight and subcutaneous fat thickness occurred at d 28. FCSM had no significant effects on the shape of growth curve of abdominal fat weight and subcutaneous fat thickness, but reduced the height of the curve. Birds receiving the 6FCSM diet for 21 d had smaller adipocyte surface and lower serum glucose as well as triglyceride concentration. Conclusion: FCSM is beneficial for broiler chickens as it positively affects their growth and carcass in addition to altering their fat deposition.

• 한국전산구조공학회논문집
• /
• 제17권1호
• /
• pp.59-65
• /
• 2004

응력확대계수는 균열진전경로의 수치해석적 연구에서 널리 사용되고 있다. 그러나 많은 경우에서 균열선단주위 응력의 급수전개식 중 이어지는 항은 정량적으로 중요하다. 따라서 본 연구에서는 이의 항을 계산하기 위하여 등매개 2차특이요소를 이용한 유한요소해석을 수행하였다. 일례로 단축하중을 받는 무한 직방성체 내 경사균열에 대하여 균열요소크기와 균열경사각을 달리 주어 가며 해석을 수행하였으며, 수치해석결과는 이론해와 비교하여 잘 일치하고 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1318-1320
• /
• 1999

Recently, according to the growth of national economy and the improvement of lining conditions, electric power demand is increasing gradually. So it is being examined to construct large thermal power plants or nuclear plants. For the effective use of lands and for the economy of generations sites, the distance between generation and demand locations becomes farther and farther. At the same time, people desire higher quality or electric power. So in this paper, the optimal modulation controller for HVDC transmission system are designed by a recursive algorithm that determines the state weighting matrix Q of a linear quadratic performance. It means that the application of optimal modulation controller in HVDC transmission system can contribute the propriety to the improvement of the stability in HVDC transmission system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권6호
• /
• pp.2612-2633
• /
• 2020

Due to the explosive growth of multimedia speech data, how to protect the privacy of speech data and how to efficiently retrieve speech data have become a hot spot for researchers in recent years. In this paper, we proposed an encrypted speech retrieval scheme based on long short-term memory (LSTM) neural network and deep hashing. This scheme not only achieves efficient retrieval of massive speech in cloud environment, but also effectively avoids the risk of sensitive information leakage. Firstly, a novel speech encryption algorithm based on 4D quadratic autonomous hyperchaotic system is proposed to realize the privacy and security of speech data in the cloud. Secondly, the integrated LSTM network model and deep hashing algorithm are used to extract high-level features of speech data. It is used to solve the high dimensional and temporality problems of speech data, and increase the retrieval efficiency and retrieval accuracy of the proposed scheme. Finally, the normalized Hamming distance algorithm is used to achieve matching. Compared with the existing algorithms, the proposed scheme has good discrimination and robustness and it has high recall, precision and retrieval efficiency under various content preserving operations. Meanwhile, the proposed speech encryption algorithm has high key space and can effectively resist exhaustive attacks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권7호
• /
• pp.3057-3075
• /
• 2020

End-to-end network delay plays an vital role in distributed services. This delay is used to measure QoS (Quality-of-Service). It would be beneficial to know all node-pair delay information, but unfortunately it is not feasible in practice because the use of active probing will cause a quadratic growth in overhead. Alternatively, using the measured network delay to estimate the unknown network delay is an economical method. In this paper, we adopt the state-of-the-art matrix completion technology to better estimate the network delay from limited measurements. Although the number of measurements required for an exact matrix completion is theoretically bounded, it is practically less helpful. Therefore, we propose an online adaptive sampling algorithm to measure network delay in which statistical leverage scores are used to select potential matrix elements. The basic principle behind is to sample the elements with larger leverage scores to keep the traits of important rows or columns in the matrix. The amount of samples is adaptively decided by a proposed stopping condition. Simulation results based on real delay matrix show that compared with the traditional sampling algorithm, our proposed sampling algorithm can provide better performance (smaller estimation error and less convergence pressure) at a lower cost (fewer samples and shorter processing time).

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.26-30
• /
• 2005

Stamper surface temperature is very critical in replicating the high density optical disc substrates using injection molding as the pit or land/groove patterns on the optical disc substrate have decreased due to the rapid increase of areal density. During the filling stage, the polymer melt in the vicinity of the stamper surfaces rapidly solidifies and the solidified layer generated during polymer filling greatly deteriorates transcribability and fluidity of polymer melt. To improve transcribability and fluidity of polymer melt, stamper surface temperature should be controlled such that the growth of the solidified layer is delayed during the filling stage. In this study, the effect of heating on replication process was simulated numerically. Then, an injection mold equipped with instant active heating system was designed and constructed to raise the stamper surface temperature over the glass transition temperature during filling stage of the injection molding. Also, the closed loop controller using the Kalman filter and the linear quadratic Gaussian regulator was designed. As a result, the stamper surface temperature was controlled according to the desired reference stamper surface temperature.