• Animal Bioscience
• /
• v.36 no.12
• /
• pp.1860-1868
• /
• 2023

Objective: This study was conducted to evaluate the effects of optimal trace mineral levels on the physiological responses, reproductive performance, litter performance, blood profiles and milk composition in gestating sows. Methods: A total of 59 multiparous sows (Yorkshire×Landrace) with similar body weight (BW), backfat thickness (BF), and parity were assigned to one of four treatments with 14 or 15 sows per treatment using a completely randomized design. The treatments were 100% (M1), 300% (M3), 600% (M6), and 900% (M9) of the National Research Council (NRC) Nutrient Requirements of Swine. During lactation period, all the sows were fed the same commercial lactation diet. Results: No significant differences were observed in the BW, BF, reproductive performance, milk composition, or growth performance of the piglets. On day 70 of gestation, the serum zinc concentration showed a quadratic response to M6 treatment (quadratic, p<0.05). Moreover, as the dietary mineral levels increased, the zinc concentration increased linearly at 110 days of gestation (linear, p<0.05). Furthermore, copper and iron concentrations in the serum of sows at 24 h postpartum decreased linearly when high levels of dietary minerals were provided (linear, p<0.05). In the serum of piglets, serum zinc concentrations decreased linearly (linear, p<0.05), and iron concentration showed a quadratic response (quadratic, p<0.05) with an increase in trace mineral premix levels in gestation diets. Conclusion: The current trace mineral requirements of NRC (2012) are suitable for gestating sows, and the addition of dietary mineral levels in the gestating diet did not show any improvements during the gestation and lactation periods.

• Animal Bioscience
• /
• v.35 no.5
• /
• pp.730-739
• /
• 2022

Objective: This study investigated the effects of dietary n-6:n-3 polyunsaturated fatty acid (PUFA) ratio on growth performance, blood indexes, tissue fatty acid composition and the gene expression in finishing pigs. Methods: Seventy-two crossbred ([Duroc×Landrace]×Yorkshire) barrows (68.5±1.8 kg) were fed one of four isoenergetic and isonitrogenous diets with n-6:n-3 PUFA ratios of 2:1, 3:1, 5:1, and 8:1. Results: Average daily gain, average daily feed intake and gain-to-feed ratio had quadratic responses but the measurements were increased and then decreased (quadratic, p<0.05). The concentrations of serum triglyceride, total cholesterol and interleukin 6 were linearly increased (p<0.05) with increasing of dietary n-6:n-3 PUFA ratio, while that of high-density lipoprotein cholesterol tended to decrease (p = 0.062), and high-density lipoprotein cholesterol:low-density lipoprotein cholesterol ratio and leptin concentration were linearly decreased (p<0.05). The concentration of serum adiponectin had a quadratic response but the measurement was decreased and then increased (quadratic, p<0.05). The proportion of C18:3n-3 was linearly decreased (p<0.05) in the longissimus thoracis (LT) and subcutaneous adipose tissue (SCAT) as dietary n-6:n-3 PUFA ratio increasing, while the proportion of C18:2n-6 and n-6:n-3 PUFA ratio were linearly increased (p<0.05). In addition, the expression levels of peroxisome proliferator-activated receptor gamma (PPARγ) and lipoprotein lipase in the LT and SCAT, and adipocyte fatty acid binding protein and hormone-sensitive lipase (HSL) in the SCAT had quadratic responses but the measurements were increased and then decreased (quadratic, p<0.05). The expression of HSL in the LT was linearly decreased (p<0.05) with increasing of dietary n-6:n-3 PUFA ratio. Conclusion: Dietary n-6:n-3 PUFA ratio could regulate lipid and fatty acid metabolism in blood and tissue. Reducing dietary n-6:n-3 PUFA ratio (3:1) could appropriately suppress expression of related genes in PPARγ signaling, and result in improved growth performance and n-3 PUFA deposition in muscle and adipose tissue in finishing pigs.

• Communications for Statistical Applications and Methods
• /
• v.26 no.4
• /
• pp.337-346
• /
• 2019

This paper discusses a method for obtaining nonnegative estimates for variance components in a random effects model. A variance component should be positive by definition. Nevertheless, estimates of variance components are sometimes given as negative values, which is not desirable. The proposed method is based on two basic ideas. One is the identification of the orthogonal vector subspaces according to factors and the other is to ascertain the projection in each orthogonal vector subspace. Hence, an observation vector can be denoted by the sum of projections. The method suggested here always produces nonnegative estimates using projections. Hartley's synthesis is used for the calculation of expected values of quadratic forms. It also discusses how to set up a residual model for each projection.

• Coupled systems mechanics
• /
• v.13 no.4
• /
• pp.277-291
• /
• 2024

The objective of this work is to study the effects of the modification of material properties on the vibration of the FGM beam using an integral shear strain model. In the present theory, the rotational displacement is replaced by an integral term in the displacement fields. The use of a shear correction factor is not necessary because our model gives a parabolic description of shear stress through the thickness while satisfying the conditions of zero shear stresses on the bottom and top surfaces of the beam. The FGM beam is assumed that the beam is a mixture of metal and ceramic, and that its properties change depending on the power functions of the thickness of the beam such as: linear, quadratic, cubic and inverse quadratic. By applying Hamilton's principle, general formulas were obtained to obtain the frequencies of the FGM beam. The effects of changing compositional characteristics of materials presented by volume fraction of FGM beams with simply supported edges on free vibration and some mode shapes are investigated.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.12
• /
• pp.1882-1888
• /
• 2019

Objective: An experiment was conducted to evaluate the effects of increasing levels of crude glycerin (0%, 6%, 12%, and 18%) used as a substitute for corn in lamb feed on the quantitative characteristics of the carcass. Methods: A total of 40 crossbred Santa $In{\hat{e}}s$ lambs that were four months old with a mean initial weight of $21.0{\pm}0.8kg$ were randomly distributed in four treatments with ten replicates. The animals were slaughtered after 66 days of confinement. The effects of crude glycerin as a replacement for corn in the diet of the lambs on the carcass characteristics, commercial cut weight and yield and carcass measurements were studied. Results: There was an increasing linear effect for body weight at slaughter with the replacement of corn by crude glycerin. The dry matter and metabolizable energy intakes, weight of the empty body, hot carcass weight and cold carcass weight showed a quadratic effect, with maximum crude glycerin levels estimated at 10.9%, 9.8%, 10.83%, 11.78%, and 11.35%, respectively. The initial pH was not influenced by the replacement of corn for crude glycerin, while the final pH presented a quadratic effect. The other parameters of the carcass and the weights and yields of commercial cuts were not influenced. There was also no effect of the diets on carcass morphometric measurements, except for the thoracic perimeter and the carcass compactness index, which presented quadratic and linear effects, respectively. Conclusion: Crude glycerin can replace up to 18% of corn because it favours muscle tissue deposition without promoting changes in the main carcass characteristics of lambs.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.148-151
• /
• 2003

In order to achieve reliable but cost-effective crash simulations of stamped parts, sheet forming process effects were incorporated in simulations using the ideal forming theory mixed with the 3D hybrid membrane/shell method, while the subsequent crash simulations were carried out using a dynamic explicit finite element code. Example solutions performed for forming and crash simulations of I- and S-shaped rails verified that the proposed approach is cost-effective without sacrificing accuracy. The method required a significantly small amount of additional computation time, less than 3% for the specific examples, to incorporate sheet forming effects to crash simulations. As for the constitutive equation, the combined isotropic-kinematic hardening law and the non-quadratic anisotropic yield stress potential as well as its conjugate strain-rate potential were used to describe the anisotropy of AA6114-T4 aluminum alloy sheets.

• Korean Journal of Poultry Science
• /
• v.34 no.3
• /
• pp.181-185
• /
• 2007

This study was conducted to evaluate the effects of dietary delta-aminolevulinic acid (ALA) on egg production and egg quality in laying hens. A total of 114 (30-wk age) ISA brown commercial hens were used in current trial for 28 days. Dietary treatments included 1) CON (basal diet), 2) 0.05 (basal diet + ALA 0.05%), 3) 0.1 (basal diet + ALA 0.1%) and 4) 0.2 (basal diet + ALA 0.2%). There were four dietary treatments with four replication per treatment and twelve laying hens per replication. During the overall period, egg production was quadratically affected (P=0.01) by ALA supplementation compared with control treatment. Egg weight increased (linear effect, P=0.01; quadratic effect, P=0.01) as the level of delta-aminolevulinic acid supplementation increased in the diets. Yolk color was increased quadratically (P=0.03). The difference of hemoglobin concentration was increased (quadratic effect, P=0.01) as the level of delta-aminolevulinic acid supplementation increased in the diets. In conclusion, the results of the experiment suggest that dietary delta-aminolevulinic acid could affect egg weight, yolk color and hemoglobin concentration in laying hens.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1266-1272
• /
• 2007

The current study was conducted to investigate the effects of dietary complex probiotics supplementation on growth performance, nutrient digestibility, blood characteristics and noxious gas emission of manure slurry in growing pigs. A total of forty eight pigs with an initial body weight of 20.12 kg were allotted to three dietary treatments (two pigs per pen with eight pens per treatment). Dietary treatment included: 1) CON (basal diet), 2) Pro1 (basal diet + 0.1% complex probiotics) and 3) Pro2 (basal diet + 0.2% complex probiotics). The experiment was lasted six weeks. Through the entire experimental period, ADG was increased with the increased complex probiotics supplementation level (linear effect, P<0.05). However, neither ADFI nor gain/feed was influenced by the dietary treatments. Complex probiotics supplementation increased DM digestibility (linear effect, P<0.05). Also, the N digestibility was improved, with the Pro1 treatment showed highest value (linear and quadratic effect, P<0.05). Supplementation of complex probiotics did not affect the WBC, RBC, lymphocyte and BUN concentrations in blood. The $NH_3-N$ emission from manure slurry was decreased with the increased level of complex probiotics supplementation (linear and quadratic effect, P<0.05). Similarly, $H_2S$ emission of manure slurry was also decreased significantly when complex probiotics was included in diet (linear effect, P<0.05). In conclusion, dietary supplementation of Complex probiotics can increase growth performance and decrease noxious gas emission of manure slurry in growing pigs.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.8
• /
• pp.2113-2122
• /
• 1994

The 3-D FEM analysis for simulating the stamping operation of planar anisotropic sheet metals with arbitrarily-shaped tools is introduced. An implicit, incremental, updated Lagrangian formulation with a rigid-viscoplastic constitutive equation is employed. Contact and friction are considered through the mesh-normal, which compatibly describes arbitrary tool surfaces and FEM meshes without depending on the explicit spatial derivatives of tool surfaces. The consistent full set of governing relations, comprising equilibrium equation and mesh-normal geometric constraints, is appropriately linearized. The linear triangular elements are used for depicting the formed sheet, based on membrane approximation. Barlat's non-quadratic anisotropic yield criterion(strain-rate potential) is employed, whose in-plane anisotropic properties are taken into account with anisotropic coefficients and non-quadratic function parameter. The planar anisotropic finite element formulation is tested with the numerical simulations of the stamping of an automotive hood inner panel and the drawing of a hemispherical punch. The in-plane anisotropic effects on the formability of both mild steel and aluminum alloy sheet metals are examined.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.2
• /
• pp.127-136
• /
• 2016

Springing is the resonance phenomenon of a ship hull girder with incoming waves having the same natural frequency of the ship. In this study, a simple and reliable calculation method was developed based on quadratic strip theory using the Timoshenko beam approach as an elastic hull girder. Second-order hydrodynamic forces and Froude-Krylov forces were applied as the external force. To improve the accuracy of the strip method, the variation in the added mass along the ship hull longitudinal direction, so called tip-effect, was considered. The J-factor was also employed to compensate for the effect of three-dimensional fluid motion on the two-node vibration of the ship. Using the developed method, the first- and second-order vertical bending moments of the Flokstra ship were compared. A comparative study was also carried out for a uniform barge ship and a 10,000 TEU container ship with the respective methods including the J-factor and tip-effect.