• Journal of Korean Society of Forest Science
• /
• v.77 no.3
• /
• pp.331-337
• /
• 1988

To investigate the effects of forest stand and stony characteristics on interception loss from canopy trees, throughfall and stemflow under the canopy of a pine stand and a hardwood stand were measured during 4-month periods July to October, 1986 at the Kwanak Arboretum near Anyang, and the data were analysed by correlation and regression methods. The man results obtained from this study are summerized as follows : 1. The overall throughfall collected during measurement period were 593.5mm(76.7%) in the pine stand and 663.1mm(81.8%) in the hardwood stand oui of total percipitation of 773.8mm. Combined regression analysis describes the relation between total precipitation(P) and throughfall(T) in the pine stand as T=-1.8675+0.8320 P. in the hardwood stand as T=-8179+0.8805P. 2. And the sum of stemflow from measurement of total precipitation in the pine stand and the hardwood stand were 37.4mm(4.8%) and 15.5mm(2%), respectively. In total precipitation less than 2.5mm, stemflow were not measured in both the pine stand and the hardwood stand. Regression equations for the pine stand and the hardwood stand are S=-0.6155+0.0698P, S=-0.0497+0.0183P. The mean slope and intercept of the individual regression of stemflow on rainfall for each fewest stand indicate the proportion of the rain diverted to the trunks and trunk water capacity, respectively. 3. Interception loss accounted for 142.9mm(18.5%) in the pine stand and 125.2mm(16.2%), in the hardwood stand. 4. By quadratic predictive model of relation between interception loss and total incident rainfall, the extent of variance in interception loss explained was about 72% and 61% in the pine stand and the hardwood stand respectively.

• Korean Journal of Food Science and Technology
• /
• v.35 no.4
• /
• pp.604-609
• /
• 2003

In order to investigate the transfer rate of calcium into rice and the effect of soaking conditions-temperature (20, 30, 40, 50 and $60^{\circ}C$, $X_1$), calcium concentration of soaking solution (0, 250, 500, 750 and 1000 mg/L, $X_2$) and soaking time (5, 10, 15, 20 and 25 min, $X_3$), moisture absorption rate, hardness and calcium content of rice after soaking were analyzed. When the soaking temperature and time were increased the moisture absorption rate also increased (p<0.01). Quadratic and interaction effects on the moisture absorption rate among variables were highly significant, within 5%. The predictive model for moisture absorption rate $(Y_1)$ was as follows: $Y=16.14+0.78X_1+1.24X_3-0.23X_1{^2}+0.14X_2{^2}-0.42X_3X_1-0.38X_3{^2}\;(R^2=0.9123)$. Hardness was decreased as soaking time and temperature increased. Calcium contents of soaked rice increased as temperature, the calcium concentration of soaking solution and soaking time were increased (p<0.01). Also the interactive effect between soaking time and calcium concentration of soaking solution was high. The predictive model for calcium content $(Y_3)$ was as follows: $Y_3=470.80+110.87X_1+123.47X_2+52.29X_3-7.42X_1{^2}-14.87X_2{^2}-9.49X_3X_2-20.57X_3{^2}\;(R^2=0.9840)$. From the results in this study, if adults and children take 400 g of calcium enriched rice with 600 mg/kg and $700{\sim}900\;mg/kg$, respectively, they can expect to take more calcium than the recommended intake without other calcium reinforcing agents.

• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.650-658
• /
• 2006

The recycling of TDA from solid waste of TDI plant(TDI-R) by near-critical hydrolysis reaction had been studied by means of a statistical design of experiment. The main and interaction effects of process variables had been defined from the experiments in a batch reactor and the correlation equation with process variables for TDA yield had been obtained from the experiments in a continuous pilot plant. It was confirmed that the effects of reaction temperature, catalyst type and concentration, and the weight ratio of water to TDI-R(WR) on TDA yield were significant. TDA yield decreased with increases in reaction temperature and catalyst concentration, and increased with an increase in WR. As a catalyst, NaOH was more effective than $Na_2CO_3$ for TDA yield. The interaction effects between catalyst concentration and temperature, WR and temperature, catalyst type and reaction time on TDA yield had been defined as significant. Although the effect of catalyst concentration on TDA yield at $300^{\circ}C$ as subcritical water was insignificant, the TDA yield decreased with increasing catalyst concentration at $400^{\circ}C$ as supercritical water. On the other hand, the yield increased with an increase in WR at $300^{\circ}C$ but showed negligible effect with WR at $400^{\circ}C$. The optimization of process variables for TDA yield has been explored with a pilot plant for scale-up. The catalyst concentration and WR were selected as process variables with respect to economic feasibility and efficiency. The effects of process variables on TDA yield had been explored by means of central composite design. The TDA yield increased with an increase in catalyst concentration. It showed maximum value at below 2.5 of WR and then decreased with an increase in WR. However, the ratio at which the TDA yield showed a maximum value increased with increasing catalyst concentration. The correlation equation of a quadratic model with catalyst concentration and WR had been obtained by the regression analysis of experimental results in a pilot plant.

• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.659-668
• /
• 2006

The optimization of supercritical water oxidation (SCWO) process for decomposing nitromethane was studied by means of a design of experiments. The optimum operating region for the SCWO process to minimize COD and T-N of treated water was obtained in a lab scale unit. The authors had compared the results from a SCWO pilot plant with those from a lab scale system to explore the problems of scale-up of SCWO process. The COD and T-N in treated waters were selected as key process output variables (KPOV) for optimization, and the reaction temperature (Temp) and the mole ratio of nitromethane to ammonium hydroxide (NAR) were selected as key process input variables (KPIV) through the preliminary tests. The central composite design as a statistical design of experiments was applied to the optimization, and the experimental results were analyzed by means of the response surface method. From the main effects analysis, it was declared that COD of treated water steeply decreased with increasing Temp but slightly decreased with an increase in NAR, and T-N decreased with increasing both Temp and NAR. At lower Temp as $420{\sim}430^{\circ}C$, the T-N steeply decreased with an increase in NAR, however its variation was negligible at higher Temp above $450^{\circ}C$. The regression equations for COD and T-N were obtained as quadratic models with coded Temp and NAR, and they were confirmed with coefficient of determination ($r^2$) and normality of standardized residuals. The optimum operating region was defined as Temp $450-460^{\circ}C$ and NAR 1.03-1.08 by the intersection area of COD < 2 mg/L and T-N < 40 mg/L with regression equations and considering corrosion prevention. To confirm the optimization results and investigate the scale-up problems of SCWO process, the nitromethane was decomposed in a pilot plant. The experimental results from a SCWO pilot plant were compared with regression equations of COD and T-N, respectively. The results of COD and T-N from a pilot plant could be predicted well with regression equations which were derived in a lab scale SCWO system, although the errors of pilot plant data were larger than lab ones. The predictabilities were confirmed by the parity plots and the normality analyses of standardized residuals.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.11
• /
• pp.1386-1396
• /
• 2017

The purpose of this study was to determine the optimum Platycodon grandiflorum root concentrate (PGRC, $65^{\circ}Brix$), fermented P. grandiflorum root extract by Lactobacillus plantarum (FPGRE, $2^{\circ}Brix$), and cactus Chounnyouncho extract (Cactus-E, $2^{\circ}Brix$) for preparation of PGRC stick product with FPGRE using response surface methodology (RSM). The experimental conditions were designed according to a central composite design with 20 experimental points, including three replicates for three independent variables such as amount of PGRC (8~12 g), FPGRE (0~20 g), and Cactus-E (0~20 g). The experimental data for the sensory evaluation and functional properties based on antioxidant activity and antimicrobial activity were fitted with the quadratic model, and accuracy of equations was analyzed by ANOVA. For the responses, sensory and functional properties showed significant correlation with contents of three independent variables. The results indicate that addition of PGRC contributed to increased bitterness and acridity based on the sensory test and antimicrobial activity, addition of FPGRE contributed to increased antioxidant activity and antimicrobial activity, and addition of Cactus-E contributed to increased fluidity based on the sensory test, antioxidant activity, and antimicrobial activity. Based on the results of RSM, the optimum formulation of PGRC stick product was calculated as PGRC 8.456 g, FPGRE 20.00 g, and Cactus-Ex 20.00 g with minimal bitterness and acridity, as well as optimized fluidity, antioxidant activity, and antimicrobial activity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.2
• /
• pp.192-197
• /
• 1989

Two sweet corn hybrids, 'Tanok l' and 'Golden Cross Bantam 70 (GCB 70)' were grown at five plant densities, of 4, 167. 5,556, 6,667. 8, 333, and 11, 111 plants per 10 ares, with or without tiller removal, to determine effects of tiller removal on growth and yield of sweet corn hybrids at various plant densities. Tillers were pulled when less than 15 cm tall. The number of tillers per plant linearly decreased as plant density increased. The two hybrids had similar plant height, ear length and diameter, ear weight and the number of ears per plant and 10 ares. Tanok 1 lodged approximately 20％ at above 8,333 plants per 10 ares, while GCB 70 did not lodge at all, at any plant density. Tanok 1 had higher leaf area index (LAI), ear and stover yields than GCB 70. Except for root lodging and LAI, hybrid x plant density interaction was not significant at 5％ probability level. Plant density did not affect silking data. Increasing plant density linearly increased plant height, LAI, and stover yield, but linearly decreased ear length, ear weight, and the number of ears per plant. Increase in LAI was greater in Tanok 1 than in GCB 70, with increasing plant density. The relationships between the number of ears and ear yield per 10 ares and plant density were Quadratic. The optimum plant density was estimated to be approximately 6500 plants per 10 ares, using the equation based on ear yield. Except for ear height and LA I, hybrid x tiller removal and plant density x tiller removal interactions were not significant. Hybrid x plant density x tiller removal interaction was not significant for any characters. When averaged over hybrids and plant densities, tiller removal reduced plant height and ear and stover yields by about 3, 10, and 16％, respectively, but did not significantly affect silking date, root lodging, ear length and diameter and the number of ears per plant and per 10 ares. The results indicate that the optimum plant density is approximately 6500 plants per 10 ares, regardless of tiller removal and tillers are not to be removed at any plant density.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.2
• /
• pp.60-67
• /
• 2017

The purpose of this study was to evaluate the influence of landscaping shade materials' porosity on the Mean Radiant Temperature (MRT) of summer outdoors. The MRTs were measured under seven different types of black membranes with holes of 8mm diameter at different intervals applied on the top of wooden boxes, and compared with those of four additional control plots with or without shade and lateral boxes. The applied porosities were 0.5, 1, 2, 4, 8, 16%, and 32%, and three groups of three shades were compared sequentially from August 13 to September 8, 2016. The MRTs under the shade without lateral block, no shade with lateral block, and shade with lateral block were $33.08^{\circ}C$, $45.80^{\circ}C$, and $42.3^{\circ}C$, respectively, while that of no-shaded no-lateral screen was $44.26^{\circ}C$, based on records from 11:00 AM to 3:00 PM on the days with a peak globe temperature higher than $30^{\circ}C$. An ANCOVA analysis showed that the MRTs under the shades with 0.5, 1, 2, 4, 8, 16%, and 32% porosities were calculated as 43.40, 43.10, 41.49, 40.43, 39.61, $37.91^{\circ}C$, and $38.12^{\circ}C$, respectively, while that in the no shaded control box was $45.8^{\circ}C$. The curve fitted between MRTs and the porosity showed a U-shaped quadratic function with the minimum MRT at 16% practically or 22.5% statistically.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.5
• /
• pp.626-635
• /
• 2009

The purposes of the study were to identify a comprehensive competency list related to the jobs of nutrition teachers and to compare the competency needs for nutrition teachers and dieticians' competency levels. Job functional areas and a competency list for nutrition teachers were developed based on a review of literature and revised through expert panel reviews. A total of 53 competency statements associated with 11 job functional areas were specified. Questionnaires were distributed to 457 dieticians engaged in school food service and 148 responses were returned (response rate: 32.4%). Excluding incomplete responses, 142 questionnaires were used for data analysis. Approximately half of the respondents were enrolled in an 1-year nutrition teacher certificate program, 25% in a graduate school of nutrition education, and 19% had completed an 1-year nutrition teacher certificate program. The dieticians highly rated requirements of the competencies related to sanitation and employee safety, nutrition counseling, nutrition education, and teaching practices; in contrary, their competency levels for nutrition education, nutrition counseling, and teaching practices were low. Respondents' competency levels were significantly lower than the required competency levels of effective nutrition teachers in all functional areas. A quadratic analysis based on the requirement and self-evaluation of the competencies revealed that priorities of education programs targeting school nutrition teachers or students preparing to be nutrition teachers should be placed on improving competencies related to nutrition education, nutrition counseling, teaching practices, sanitation and employee safety, menu management, and human resource management. These results can be used to develop curriculum materials for basic and continuing professional education for nutrition teachers. It is necessary to review and update competencies regularly to reflect environmental changes in school food service programs.

• Parasites, Hosts and Diseases
• /
• v.36 no.1
• /
• pp.15-22
• /
• 1998

An in uitro culture technique was established for harvesting Strongwloides venezuelensis free-living infective larvae using a nutrient broth medium as a substitute for rat-feces in polyvinyl culture bags ($10{\;}{\times}{\;}12{\;}cm$). The egg hatch rate V) in sterile saline at different incubation temperatures (X) was expressed as the quadratic function, Y = $-0.192X^2$ + 8.673x - 19.550 (r = 0.901). The highest (100%) egghatch rate was observed at $25^{\circ}C$. A significant difference (p<0.05) in development rate W) of free-living infective larvae was observed between different concentrations of nutrient broth (X) which was highest (20.6%1 in 0.12% nutrient broth concentrations, incubated at $20^{\circ}C$ for 5 days [Y = $-864.032X^2$ + 245.995X- 0.560 (r = 0.875)]. Yields (Y) of infective larvae were observed relatively high when the culture medium was incubated at higher temperatures (X) which peaked at $25^{\circ}C$ (20.0%) than at lower temperatures. $15^{\circ}C$M (10.9%) and $20^{\circ}C$ (18.1%) [Y = $-0.189X^2$ + 8.387x- 72.795 (r = 0.981)]. The period W) required for the development of infective larvae decreased with higher incubation temperatures (X) [Y = $0.035X^2$ - 2.025X + 32.375 (r = 0.995)] The highest yield (19.2%) of infective larvae was obtained from culture bag inoculated with 15.000 eggs than with below and over 15,000 eggs in 0.12% nutrient broth and incubated at $25^{\circ}C$ for 4 days. The newly adapted culture method (from egg to third-stage larva) may be useful as a bio-bar/bioassay system for screening new chemical products, anthelmintics and pesticides, as well as for parasito immunological studies with Strongwloides species.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.5
• /
• pp.265-277
• /
• 2019

Using the measured data of waves and shore-line, we reviewed the grand circulation process and seasonal variation of beach cusp at the Mang-Bang beach from the perspective of trapped mode Edge waves known as the driving mechanism of beach cusp. In order to track the temporal and spatial variation trends of beach cusp, we quantify the beach cusp in terms of its wave length and amplitude detected by threshold crossing method. In doing so, we also utilize the spectral analysis method and its associated spectral mean sand wave number. From repeated period of convergence and ensuing splitting of sand waves detected from the yearly time series of spectral mean sand wave number of beach cusp, it is shown that the grand circulation process of beach cusp at Mang-Bang beach are occurring twice from 2017. 4. 26 to 2018. 4. 20. For the case of beach area, it increased by $14,142m^2$ during this period, and the shore-line advanced by 18 m at the northen and southern parts of the Mang-Bang beach whereas the shore-line advanced by 2.4 m at the central parts of Mang-Bang beach. It is also worthy of note that the beach area rapidly increased by $30,345m^2$ from 2017.11.26. to 2017.12.22. which can be attributed to the nature of coming waves. During this period, mild swells of long period were prevailing, and their angle of attack were next to zero. These characteristics of waves imply that the main transport mode of sediment would be the cross-shore. Considering the facts that self-healing capacity of natural beaches is realized via the cross-shore sediment once temporarily eroded. it can be easily deduced that the sediment carried by the boundary layer streaming toward the shore under mild swells which normally incident toward the Mang-Bang beach makes the beach area rapidly increase from 2017.11.26. to 2017.12.22.