• Journal of Conservation Science
• /
• v.33 no.5
• /
• pp.345-354
• /
• 2017

A mural was discovered in the Ssanggyesa temple located in Jindo island, during repair of the Daeungjeon Hall. A study was conducted to determine the binding medium used for preparing the mural. Pyrolysis/GC/MS and IR spectrometry were used to analyze a painting specimen. Direct approach and on-line methylation approach were attempted for the pyrolysis/GC/MS. In IR analysis, the spectra of the specimen were found to be different from those of Asian lacquer, yellow lacquer, animal glue, and acrylic emulsion resin. They were also not identical to the standard IR spectra of drying oils such as linseed oil. Pyrolysis/GC/MS results of the specimen were different from those of Asian lacquer, yellow lacquer, animal glue, and acrylic emulsion resin. In the mean time, palmitic acid, octadecanoic acid, nonanedioic acid, and octadecenoic acid, which are characteristic pyrolysis products of dried drying oil, were detected. In addition, the pyrolysis/GC/MS chromatograms of the specimen and dried drying oil were also very similar. Therefore, it was concluded that the painting was prepared using drying oil as a binding medium.

• Food Science of Animal Resources
• /
• v.21 no.3
• /
• pp.256-264
• /
• 2001

Pyrolysis/GC-mass spectrometry(Hewlet-Packard 5890GC/mass selective detector, 5971 BMSD), interfaced to a CDS Pyroprobe 1500 was optimized for rapid analysis of flavour compounds in Cheddar cheese. Twenty flavour compounds, including aldehydes(4), ketones(4), fatty acids(10), alcohol(1), and hydrocarbon(1), were identified from Cheddar cheeses. In total, Twenty-three flavour compounds aldehydes(2), ketones(8), alcohols(3), fatty acids(7), lactone(1), benzene derivative(1) and amide(1) were identified from two samples of accelerated-ripened Cheddar cheese treated with the proteolytic enzymes of Lactobacillus casei LGY. In total, Twenty-one flavour compounds; aldehydes(2), ketones(5), alcohols(2), fatty acids(11), and lactone(1) were identified from enzyme-modified cheese(EMC) treated with the combination of the proteolytic enzymes of Lactobacillus casei LGY and commercial endopeptidase or lipase. However, All the flavour compounds identified by pyrolysis/GC/MS in samples of ARC and EMC were not determined whether they are recognized as typical Cheddar flavour or not. More studies were requested on the development of methods for a rapid and convienent analysis of dairy fermented products using pyrolysis/GC-mass spectrometry.

• Elastomers and Composites
• /
• v.51 no.1
• /
• pp.63-67
• /
• 2016

Poly(ethylene-co-vinyl acetate) (EVA) was pyrolyzed to eliminate acetic acid of VA unit using off-line pyrolysis, and the deacetylated EVA was analyzed infrared spectroscopy (IR) and pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). EVA film for deacetylation was prepared by solution casting on aluminum foil and it was pyrolyzed at low temperature of $300^{\circ}C$ in the off-line pyrolysis apparatus. After deacetylation, carbon-carbon double bond (C=C) was formed by 1,2-elimination of the VA unit in the EVA backbone. Most of C=C bonds were trans-1,4-unit and 1,2-unit was also observed. Presence of the 1,2-unit in deacetylated EVA indicates that terminal or branch VA units exist in the raw EVA. Py-GC/MS chromatogram of deacetylated EVA displayed much smaller acetic acid and much more abundant other pyrolysis products than that of raw EVA, which means that the pyrolysis efficiency and separation condition were improved.

• Analytical Science and Technology
• /
• v.28 no.3
• /
• pp.221-227
• /
• 2015

Animal glue is a traditional material that was used widely as an adhesive in cultural artifacts, such as Buddhist paintings, dancheong (traditional multicolored paintwork on wooden buildings), mother-of-pearl inlay, and so on. Spectroscopic methods, such as infrared spectroscopy, have been used for the analysis of animal glue. However, such methods do not yield sufficient information about the constituents of the glue. Because pyrolysis/GC/MS analysis is able to estimate the components of a material through the examination of its pyrolyzed products, it is useful for the analysis of polymeric material. In this study, pyrolysis/GC/MS analysis was used to determine the chemical composition of animal glue. The appropriate conditions for analyzing animal glue were established by examining pyrolysis temperature, quantity of the sample, and the repeatability of the method. Some products of pyrolysis were identified. We also analyzed commercial gelatin and animal glue using the established method and found almost no differences in chromatograms among the samples. The results will be used as supporting data to confirm the use of animal glue in cultural artifacts and to replace traditional animal glue by commercial gelatin.

• Polymer(Korea)
• /
• v.27 no.3
• /
• pp.271-274
• /
• 2003

A pyrolysis gas-chromatographic method (Py-GC) was utilized for the identification as well as the content measurement of textile materials. Py-GC was applied to natural cotton fiber, synthetic polyester fiber, and their blended fabrics. The characteristic peaks originated from thermally decomposed products were observed, and the area of peak increased with the content of polyester. The products of pyrolized polyester were identified as benzoic acid terephthalic acid, and vinyl benzoic acid, which were characterized by mass spectrometry. This analytic method of offered a quantitative means to identify the content of cotton and polyester.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.553-556
• /
• 2005

Pyrolysis of polyethylene was carried out in the stainless steel reactor of internal volume of $40cm^3$. Pyrolysis reactions were performed at temperature $390-450^{\circ}C$ and the pyrolysis product were collected separately as reaction products and gas products. The molecular weight distributions(MWDs) of each liquid product were determined by GC-SIMDIS. Molecular weight of each product were decreased wi th increase of react ion temperature and time.

• Analytical Science and Technology
• /
• v.27 no.2
• /
• pp.100-107
• /
• 2014

Plastic has been widely used in modern artworks' materials due to its merits of process ability and mass production. In the country, value of plastic artifact is increasing but the field of plastic study is limited to industrial purpose. In this study, Identification methods of plastic were performed by SPME-GC/MS and pyrolysis-GC/MS using trace of samples. As a result of identification using SPME-GC/MS, aromatic compounds were identified from polyvinyl chloride. And alkane compounds were identified from polyethylene, and polypropylene. Aromatic compounds were identified from polystyrene, and diethylene glycol appeared in polyurethane based on polyester was identified from polyurethane. As a result of identification using pyrolysis- GC/MS, aliphatic alkenes compounds and phthalate(DEHP) were identified from polyvinyl chloride. Aliphatic alkenes compounds and phthalate(DIBP) were detected from polyethylene. 1-hexene, etc., were detected from polypropylene, aromatic compounds were identified from polystyrene, and methylene diphenyl diisocyanate which is polyurethane basic material was confirmed from polyurethane. This study suggested that non-destructive SPME and pyrolysis-GC/MS are useful to identify compounds particularly polystyrene and polyurethane. These two analytical methods were expected to be applied for identification of unidentified plastic artworks before conservation treatment.

• Applied Chemistry for Engineering
• /
• v.30 no.6
• /
• pp.707-711
• /
• 2019

The feasibility of waste concrete as a catalyst for the effective pyrolysis of polyethylene terephthalate (PET) was examined using thermogravimetric (TG) and pyrolyzer-gas chromatography/mass spectrometry (Py-GC/MS) analyses. TG analysis results indicated that the maximum decomposition temperature of PET is not altered by the use of waste concrete, showing similar values (407 ℃ and 408 ℃ at 5 ℃/min). Meanwhile, the volatile product distribution data obtained from the Py-GC/MS analysis revealed that the use of waste concrete promoted the deoxygenation reaction via converting the oxygen containing products such as benzoic acids, benzoates, and terephthalates to valuable deoxygenated aromatic hydrocarbons including benzene, toluene, ethylbenzene, and styrene. This suggests that the waste concrete can be used as a potential catalyst for the production of valuable aromatic hydrocarbons from PET pyrolysis.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.2
• /
• pp.19-25
• /
• 1995

This research was carried out to investigate the methods of liquefaction with Pinus koraiensis, and chemical components of the liquefied wood by FT-IR analysis and pyrolysis-GC/MS. Acetylated wood powder was liquefied above 90% in phenol or m-cresol when treated at about 150$^{\circ}C$ for 30min., using some catalysts. Untreated wood powder was liquefied above 90% in phenol or m-cresol when treated at about 200$^{\circ}C$ for 60min., using some catalysts. The results of FTIR analysis, carbohydrates were terribly disintegrated, the other side lignin peaks were occurred in liquefied wood, particulary. The results of pyrolysis-GC/MS, the liquefied wood have clear four peaks, phenol, guaiacol, o-cresol and m-/p-cresol, due to degradation of lignin, particulary.

• Analytical Science and Technology
• /
• v.31 no.2
• /
• pp.78-87
• /
• 2018

Asian lacquer has been used as an adhesive and coating material in Asian countries, such as China, Japan, and Korea, and other southeast Asian countries. In this study, the changes in the chemical structure of lacquer with drying was analyzed using pyrolysis/GC/MS (which is useful in analyzing polymeric material) to understand its drying procedures. Upon increasing temperature, the dried lacquer was fully pyrolyzed above the pyrolysis temperature of $500^{\circ}C$. The repeatability was good at the pyrolysis temperature of $500^{\circ}C$ (rsd = 2.6-22.3 %); however, there were differences in the pyrogram patterns when the difference in sample quantity was large. The characteristic peaks of Asian lacquer components, such as those corresponding to 1,2-benzenediol and 3-methyl-1,2-benzenediol, were detected and the compound of each peak was assigned according to the mass library. As the lacquer dried, the composition of pyrolysis products with urushiol derivatives bearing 3 C=C bonds was severely reduced compared with the ones with no C=C bonds, indicating that the polymerization is related to C=C bonds. These results can be applied to confirm the presence of lacquer in excavated relics and to monitor the changes in the composition of raw lacquer with drying.