• 대한물리의학회지
• /
• 제8권3호
• /
• pp.369-378
• /
• 2013

PURPOSE: The purpose of present study was to ascertain how the activity of the serratus anterior muscle, the upper trapezius muscle and the pectoral major muscle was affected while the upper arm was being flexed at 70, 90 and 110 degrees respectively in a closed kinetic chain exercise (wall push up plus) and an open kinetic chain exercise (static hug). METHODS: Sixteen healthy young men subjects participated in the study. Surface electromyography (EMG) data were collected from the dominant-side muscles during a closed kinetic chain exercise and an open kinetic chain exercise. The activity of each muscle was measured quantitatively, and by the use of the two-way repeated ANOVA, the data were compared with each other according to exercises and shoulder flexion angles. RESULTS: Results indicated that the closed kinetic chain exercise did not interact with the open kinetic chain exercise (p>.05). In both the closed kinetic chain exercise and the open kinetic chain exercise, the activity of the serratus anterior muscle became different significantly according to angles (p<.05). Its activity increased in order of 70, 90 and 110 degrees (p<.05). In both exercises and all angles, muscle activity was significantly higher in the serratus anterior muscle than in the upper trapezius muscle and the pectoral major muscle (p<.05). CONCLUSION: The above results show that there is a need to selectively control the exercise stress of the serratus anterior muscle in the case of the patients with the shoulder impingement syndrome characterized by the winged scapula, insufficient scapular protraction and upward rotation.

• 대한통합의학회지
• /
• 제1권1호
• /
• pp.61-68
• /
• 2013

Purpose : The purpose of this study is to evaluate the stability and balance of the body, mobility complex exercise group and a student group for FMS tests to compare the differences between the two groups to identify its purpose. Method : The subjects of this study FMS measuring D University Physical Therapy, a student enrolled patients (7:7), and 7 patients total of 14 patients was conducted, compound exercise group weekly stretching 10 minutes, the 24 members who have run a complex exercise, 10 minutes of cool down stretching, 20-minute aerobic exercise were included in the study. Result : The results of this study, according to 1) Deep squat, Inline lunge, Trunk Stability Push-up there was significant difference(p<0.05), compound exercise group came out significantly higher. 2) Hurdle Step, Shoulder Mobility Reaching, Active Straight-leg Raise, Rotary stability in measured target these women flexibility because the test items that did not show a significant difference(p>0.05), the two groups averaged compared to the other items were higher. Complex exercise group, a statistically significant difference was overall average. Conclusion : FMS can not be resolved because of a compensatory mechanism to identify disparities and unbalanced movement patterns can help. Therefore, if the FMS and other tests conducted by splicing, will be utilized more profitably, and you will be able to suggest ways that can have a positive impact injury prevention is added to the side to expand the scope of the physical therapist.

• 비파괴검사학회지
• /
• 제31권5호
• /
• pp.494-499
• /
• 2011

인체 근골격 시스템에 대한 다물체 동역학 모델을 이용한 동작중의 인체 내부의 생체역학 분석 및 평가 기술에 대하여 기술하였다. 의료영상과 사체실험 결과를 기본으로 하는 인체 다물체 동역학 모델과 3차원 동작분석 시스템을 이용한 인체 동작분석기술을 이용하여 생체내 발생하는 관절기구학, 관절모멘트 관절접촉력 및 근력을 예측하는 기술을 보행과 팔굽혀펴기 두 동작에 적용하였다. 본 연구에서 개발한 인체 다물체 동역학 모델링 기술과 3차원 동작분석기술은 다양한 동작을 수행하는 생체의 분석 및 평가 기술로 활용성이 높을 것으로 생각한다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.353-357
• /
• 1997

We have developed a prototype of a module-based patient monitor. In this paper, we describe the design methodology and specifications of the developed module-based patient monitors. The monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases, each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and $SpO_2$ with plethysmograph.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.512-514
• /
• 2004

The Electro-Optical Camera (EOC) is a high spatial resolution, visible imaging sensor which collects visible image data of the earth's sunlit surface and is the primary payload on KOMPSAT-l. The purpose of the EOC payload is to provide high resolution visible imagery data to support cartography of the Korean Peninsula. The EOC is a push broom-scanned sensor which incorporates a single nadir looking telescope. At the nominal altitude of 685Km with the spacecraft in a nadir pointing attitude, the EOC collects data with a ground sample distance of approximately 6.6 meters and a swath width of around 17Km. The EOC is designed to operate with a duty cycle of up to 2 minutes (contiguous) per orbit over the mission lifetime of 3 years with the functions of programmable gain/offset. The EOC has no pointing mechanism of its own. EOC pointing is accomplished by right and left rolling of the spacecraft, as needed. Under nominal operating conditions, the spacecraft can be rolled to an angle in the range from +/- 15 to 30 degrees to support the collection of stereo data. In this paper, the status of EOC such as temperature, dark calibration, cover operation and thermal control is checked and analyzed by continuously monitored state of health (SOH) data and image data during the mission life of 3 years. The aliveness of EOC and operation continuation beyond mission life is confirmed by the results of the analysis.

• 복식
• /
• 제53권5호
• /
• pp.79-95
• /
• 2003

The purpose of this study is firstly to survey the social and cultural background of 20th century and women´s status, and to identify what the ideal body is like and what the elements of outer garment and underwear are and the techniques to incarnate the ideal beauty. Various papers are referenced for theoretical study and the elements and techniques of underwear are analyzed based on photographical materials. This paper concludes as follows. In 1960´s, ideal beauty was small bust, long legs, which showed extremely slim Mini-skirt look. Thinly or no padded brassiere were worn for small bust, and pants-style short panty girdles were popular as they used to wear pants frequently. Lycra replaced all the closures, bones, seams and gave freedom with light weight. In 1970´s, a natural human body without sex specific was in vogue. Therefore, the non-structural knits without a pad or lining or the shirts dress were widespread for a Natural look and the naturally molded brassiere or girdles were worn as the underwears. In 1980´s, the women with powerful muscle appear which emphasized liveliness and healthfulness. The body conscious represented by wide shoulder, plump breast, accented waist, small hips, and long legs has been embodied. Outer garments emphasized women power and healthy beauty with Power suit and Form-fitting style, and underwears made the breast plump with padded brassiere and emphasized waist and hips with waspie. In 1990´s, ideal beauty was slim body with big bust and the outer garments emphasized body line of women with Hourglass silhouette. Push-up bra which emphasizes the valley of breast and supports the breast upward and the control tights for slim waist, flat abdomen, small hips, and long and slim legs have been useful as underwears. Multi-functional micro-fiber has been ideal for sculpting women body.

• 한국학교수학회논문집
• /
• 제2권1호
• /
• pp.15-30
• /
• 1999

For the purpose of turning learners' locus of control into internal-controllable variables, counseling materials were developed, and attribution counseling was given. The counseling effects were practically confirmed by way of teaching and evaluation in the actual classes, and furthermore the efforts to provide learners with successful experiences in learning were repeatedly made. As a result, the conclusions are as follows: 1. The procedure of Individual counseling for learning attribution based on individual standard grades and data of the variable order of merit apparently shows learners that if learners are to try their best in learning, they will surely go far in terms of learning in the near future. 2. The procedure of Individual counseling for teaming attribution based on achievement distribution in individual behavior-oriented fields suggests to learners that how to learn is as important as how much effort they make. Surely enough, learners are required to make more effective and efficient efforts, considering their own learning abilities. 3. With the above 1, 2 procedures involved, learners have attributed locus of causality in achievement to their internal-controllable causes. 4. With preparatory assignments according to learner's abilities provided, even slower learners came to be assured that their constant efforts could give rise to success in learning achievement. 5. Above all, it was confirmed that the learners' struggling attitude might well have a significant correlation with achievement success. The learners who are willing to attribute locus of causality in achievement to their internal-controllable causes or strenuous efforts and intrinsic motivation tend to be convinced that they can address themselves to whatever faces them, so they can set up specific learning goals fit for their abilities. Accordingly, they will bit by bit acquire successful experiences (often called 'Aha' experiences) and in turn, feeling the senses of self-efficacy and self-esteem enough to push their efforts even further, they can grow to form a positive self-concept. With one successful experience after another fed back into learners, they are gradually motivated to bring the oncoming achievement expectation to a higher level. To conclude, it is necessary that instruction leading to internal-controllable attribution should be provided, inducing learners to recognize success and failure in learning achievement as a result of their strenuous efforts.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.63-63
• /
• 2010

Using both experimental and theoretical approaches, we have investigated the adsorption properties of an organic molecule (HATCN), which is used in OLEDs as an efficient hole injection layer, on metal and inert surfaces. We have also studied the structural and electronic properties of such interfaces and the dependences on deposition thickness. We have observed different trends in work function changes with different surfaces. Our photoelectron spectroscopic measurements have revealed an abnormal phenomenon in HATCN on a metal (Cu) surface: the work function decreases at lower coverage (~monolayer) of HATCN on a metal (Cu) surface, but it increases back and becomes higher than that of a bare Cu surface at higher coverage. It has, on the contrary, been observed that the work function of graphene surface just increases as the HATCN coverage increases. Our first-principles density functional calculations has not only verified our experimental observations, but also disclosed the underlying mechanism of such abnormal and different work function behaviors. We have found that the change in work function results from mutual polarization induced by the geometrical deformation and the bond dipole formed at the interface due to the charge redistribution. At low coverage of HAT-CN on Cu substrate, the former reduces the work function significantly by pulling down the vacuum level, while the latter tends to push up the vacuum level resulting in the work function increase.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2000년도 추계학술대회 논문집
• /
• pp.91-97
• /
• 2000

The conventional model did not take momentum conservation into consideration when the electron absorbs and emits the photons. II-ray provides momentum conservations on any directions of the entering photons, and also the electrons have radial momentum conservations and fully elastic bouncing between two atoms, in the new atom model. Conventional atom model must be criticized on the following four points. (1) Natural motions between positive and negative entities are not circular motions but linear going and returning ones, for examples sexual motion, tidal motion, day and night etc. Because the radius of hydrogen atom's electron orbit is the order of 10$^{-11}$ m and the radia of the nucleons in the nucleus are the order of 10$^{-l4}$m and then the converging n-gamma rays to the nucleus have so great circular momentum, the electron can not have a circular motion. We can say without doubt that any elementary mass particle can have only linear motion because of the n-rays' hindrances, near the nucleus. (2) Potential energy generation was neglected when electron changes its orbit from outer one to inner one. The h v is the kinetic energy of the photo-electron. The total energy difference between orbits comprises kinetic and potential energies. (3) The structure of the space must be taken into consideration because the properties of the electron do not change during the transition from outer orbit to inner one even though it produces photon. (4) Total energy conservation law applies to the energy flow between mind and matter because we daily experiences a interconnection between mind and body. An understanding of the mechanisms responsible for the control of normal proliferation and differentiation of the various cell types which make up the human body will undoubtedly allow a greater insight into the abnormal growth of cells, A large body of biochemical evidence was eventually used to generate a receptor model with an external ligand binding domain linked through a single trans-membrane domain to the cytoplasmic tyrosine kinase and autophosphory-lation domains. The ligand induced conformational change in the external domain generates either a push-pull or rotational signal which is transduced from the outside to the inside of cell.l.ell.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.313-318
• /
• 1998

Electro-Optical Camera(EOC) is the main payload of Korea Multi-Purpose SATellite(KOMPSAT) with the mission of cartography to build up a digital map of Korean territory including Digital Terrain Elevation Map(DTEM). This instrument which comprises EOC Sensor Assembly and EOC Electronics Assembly produces the panchromatic images of 6.6 m GSD with a swath wider than 17 km by push-broom scanning and spacecraft body pointing in a visible range of wavelength, 510 ~ 730 nm. The high resolution panchromatic image is to be collected for 2 minutes during 98 minutes of orbit cycle covering about 800 km along ground track, over the mission lifetime of 3 years with the functions of programmable rain/offset and on-board image data storage. The image of 8 bit digitization, which is collected by a full reflective type F8.3 triplet without obscuration, is to be transmitted to Ground Station at a rate less than 25 Mbps. EOC was elaborated to have the performance which meets or surpasses its requirements of design phase. The spectral response the modulation transfer function, and the uniformity of all the 2592 pixel of CCD of EOC are illustrated as they were measured for the convenience of end-user. The spectral response was measured with respect to each gain setup of EOC and this is expected to give the capability of generating more accurate panchromatic image to the EOC data users. The modulation transfer function of EOC was measured as greater than 16% at Nyquist frequency over the entire field of view which exceeds its requirement of larger than 10%, The uniformity that shows the relative response of each pixel of CCD was measured at every pixel of the Focal Plane Array of EOC and is illustrated for the data processing.