• Journal of Korean society of Dental Hygiene
• /
• v.3 no.2
• /
• pp.143-155
• /
• 2003

The present study attempted to analyze the influence of the mother's demographic characteristics and knowledge on oral health as well as dental care behaviors on her practice of using dental care institutions. A self-report survey was conducted among 172 mothers of children aged 5-6 attending on three preschools located in Daegu metropolitan city. Statistical analysis was conducted using the SAS 8.01 with $X^2$-test, t-test and logistic regression. The obtained results were as follows: 1. No significant association was found among the demographic characteristics of the mother, her past experience as well as the purpose of using dental care institutions. 2. There was significant relationship between the mother's knowledge and behavior concerning oral health and her past experience of using dental care institutions; the mothers having a higher level of knowledge and who thought they themselves didn't have healthy teeth and gum tended to have more visits to dental care institutions(pE0.05). There was also significant relationship between their purpose and their actual practice of using dental care institutions: the mothers having a higher level of knowledge and who thought their own oral health was good tended to visit dental institutions more for the preventive purpose than for treatments(pE0.05). 3. As a result of logistic regression, the variables formed as models were their knowledge on oral health and their values for oral health. The standardized coefficients for the two variables were -0.19 and 0.19, respectively. For the mother's purpose of visiting dental care institutions, the variables formed as models were their knowledge on oral health and their values for oral health. The standardized coefficients for the two variables were -0.40 and -0.37, respectively. The relative contributions of the two variables to the mother's practice of using dental care institutions were on the similar level.

• Journal of the Korea Convergence Society
• /
• v.9 no.10
• /
• pp.277-283
• /
• 2018

This paper is a study of TPS Migration to a multi-purpose ATS which is used for functional testing of Avionics parts. The dedicated ATS used for the performance test of avionics parts has a lot of difficulties in domestic MRO companies that carry out maintenance of high-level avionics ranging from tens of thousands won to several hundreds of billions won. For this reason, in this paper, I have studied the procedure of TPS migration to use the wire-harness in generators used in A aircraft, which is a maintenance product using a dedicated ATS, as a general-purpose ATS. Through the proposed study, We confirmed the 100% performance verification after the TPS migration from the proprietary to the general purpose. It is possible to expand infinitely through the standardization of the procedure.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.3 no.4
• /
• pp.73-80
• /
• 2004

A dual purpose robot automation system is developed for both arc welding and spot welding by one robot within a cell. The need for automation of both arc welding and spot welding processes is urgent while the production volume is not so big as to accommodate separate station for the two processes. Also, space is too narrow for separate station to be settled down in the factory. A spot welding robot is chosen and the function for arc welding are implemented in-house at cost of advanced functions. For the spot welding, a single pole type gun is used and the robot has to push down the plate to be welded, which causes the robot positioning error. Therefore, position error compensation algorithm is developed. The basic functions for the arc welding processes are implemented using the digital I/O board of robot controller, PLC, and A/D conversion PCB. The weaving pattern is taught in meticulously by manual teach. A fixture unit is also developed for dual purpose. The main aspects of the system is presented in this paper especially in the design and implementation procedure. The signal diagrams and sequence logic diagrams are also included. The outcome of the dual purpose welding cell is the increased productivity and good production stability which is indispensable for production volume prediction. Also, it leads to reduction of manufacturing lead time.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.5
• /
• pp.869-886
• /
• 2018

Rockbolt is one of the most common supports used to reinforce discontinuous rock during underground excavation. Extra drain pipes are installed to improve excavation workability and the anchorage of rockbolts in water bearing ground. The drain pipe is effective in improving the workability by providing drainage path, but it is difficult to expect the reinforcement effect, increasing disturbance of the discontinuous rock mass and the construction cost. To solve this problem, dual purpose rockbolt (DPR) has been developed for the reinforcement of rock and the drainage of ground water. DPR was able to improve the mechanical and hydraulic stability of the rocks quickly and economically. Two kinds of DPRs using FRP (Fiber Reinforced Plastic) and steel were investigated for the mechanical and hydraulic performance. Also, the workability and stability of DPR were analyzed.

• The Journal of Information Systems
• /
• v.26 no.3
• /
• pp.91-118
• /
• 2017

Purpose The purpose of this research is to investigate the effect of social capitals on organizational knowledge sharing characteristics and individual innovation activities in community of practice (CoP) of manufacturing company. Design/methodology/approach For this purpose, we divide social capitals as three dimensions, i.e. structural, relational, and cognitive dimension. Structural dimension also consists of closure and Brokerage. Relational social capital is defined as trust about colleagues, superior authorities, and organization. Then, cognitive social capital is defined as a shared understanding among individuals, such as a shared language and codes within CoP. Knowledge Sharing is defined as quantity and quality of shared knowledge. We also defines the cause and effect relationships among social capitals, organizational knowledge sharing characteristics, and individual innovation activities in CoP of manufacturing company as follows. The social capitals will have positive effects on quality of shared knowledge. Then the quality of shared knowledge will have positive effects on the individual innovation activities. This paper tested the validity of these hypothesized casual effects and the sub-hypothesized causal relationships. For the purpose, we used the Partial Least Squares (PLS) for analyzing the causal relationships. Findings Our empirical results show that social capitals of CoP mostly have effects on organizational knowledge sharing characteristics (quantity and quality of shared knowledge) and knowledge sharing activities also have effects on individual innovative activities in the workplace. In this study, these result have a significant implication that a private company will be able to gain organizational innovative performance much better by strengthening CoP supporting activities.

• Restorative Dentistry and Endodontics
• /
• v.20 no.1
• /
• pp.289-302
• /
• 1995

The purpose of this study was to estimate the shear bond strength and observe the fractured and interfacial surfaces of various dentin bonding agents used conjunction with a visible light cured composite. The senentytwo human premolars and molars extracted due to periodontal or orthodontic reasons were used and randomely divided into six groups. All the prepared dentin surfaces were treated with Superbond D-liner, Scotchbond Multi-Purpose, All-Bond 2 and Prisma Universal Bond 3 accroding to the manufacturer's instructions. Six specimens were then demineralized in 10 % HCl for 24 hours and the other six specimens were not demineralized in order to observe the interfacial surfaces with Hitachi X-450 SEM at 25Kv. Also shear bond strength were obtained using an Instron Testing Machine with a crosshead speed of 1mm/min. The following results were obtained : 1. Although shear bond strength of Superbond D-Liner(17.35 MPa) and Scotch-bond Multi-Purpose group(17.29 MPa) were higher than the All-Bond 2(12.80 MPa) and Prisma Universial Bond 3 (13.43 MPa), there were no significant statistic differences in the shear bond strength between 4 groups.(P<0.05) As a result of etching to dentin in Prism a Universial BOND 3 experimentally, the resin tag was formed, but shear bond strength was decreased. 2. The resin tag into the opened dentinal tubule was formed in Superbond D-Liner, Scotchbond Multi-Purpose, All-Bond 2(etching) and Prisma Universial Bond 3(etching), but not in the All-Bone 2 and Prism a Universial Bond 3(non-etching). 3. Strong, durable bonds between dentin and dentinal bonding agents are essential, not only resin tag into the dentinal tubules, but also hybrid layer.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.3
• /
• pp.91-101
• /
• 2010

As global warming has caused the number of abnormal changes in climate to increase throughout the world, much damage has occurred recently in Korean Peninsula which results from unexpected heavy rains, landslides, and floods from typhoons. To prevent and cope with these annually repeated natural hazards, the overall improvements are needed, including systematic management of the existing natural hazard information and improvement of hazard information. In this study, multi-purpose hazard information map based on digital image was constructed as an effective way to enhance hazard management considering regional characteristics and hazard response capabilities in the field. Multi-purpose hazard information map with a new concept by fusion of geospatial information and hazard attribute information is able to support quick decision for hazard management making and development of hazard information system.

• Korean journal of food and cookery science
• /
• v.29 no.5
• /
• pp.553-562
• /
• 2013

The purpose of this study was to analyze the key factors considered important by customers in the selection of a Korean restaurant through the use of conjoint analysis techniques. A total of 400 questionnaires were distributed over a 2-week period in October 2011, of which 354 were completed (88.5%). Statistical analysis was then carried out using the Windows 18.0 Statistics package. The research was based on the analysis of two target areas - daily meals and special purpose meals. Responses were measured by using Zaichkowsky's Personal Involvement Inventory (PII) and a 7-point Likert Scale. Overall it was found that in all areas of the results regarding the involvement related analyses, daily meals scored lower than special purpose meals. This implied that the choice of daily meals is more applicable to customers with a low level of involvement, whereas high-involvement customers were more likely to focus on special purpose meals. The analysis of high-involvement customers revealed that the quality of food, price, service quality and physical environment, in order of priority, were the most important factors in selecting a restaurant. The use of the optimum attribute combination revealed the following results: delicious food (0.601); friendly staff (0.170); clean restaurant (0.191); price of 20,000 won (-0.513). Furthermore, low-involvement customers considered the following factors as important when selecting a Korean restaurant: quality of food, followed by price, physical environment and service quality in that order. In this instance, the optimum attribute combination showed the following outcomes: tasty food (0.645); friendly staff (0.418); clean restaurant (0.365); price of 5,000 won (-0.847). These results indicated the importance of developing a marketing plan which was based specifically on a customer's involvement level, focusing on their main selection criteria when choosing a Korean restaurant.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.4
• /
• pp.263-267
• /
• 2009

The purpose of this study is to evaluate the efficacy of stipulated cleaning process, and the prohibition of cross-contamination and microbiological contamination, which inadequate cleaning in multi-production could occur, through cleaning validation of multi-purpose facility used to produce five biopharmaceutical products as sterile injection. After production of five biopharmaceutical products such as hGH, rhGCSF, rhEPO, rhFSH and rhIFN using vial filling machine, the cleaning validation such as residual analysis of active ingredients or human serum albumin, measurement of total organic carbon (TOC), residual analysis of detergent and microbiological contamination were carried out. In the case of rhGH and rhGCSF clean validations, drug residues were not detected. Furthermore, in the case of rhEPO, rhFSH and rhIFN clean validations, human serum albumin residues were not detected. At TOC (total organic carbon) analysis, all clean validations gave the TOC of about average 137.93%, not more than 150% of acceptance criteria. At sodium analysis for the checking of residues of cleaning agent, sodium residues were not detected. In sterility test, they showed no microbiological contamination of bacteria and fungi. Thus, this cleaning validation was determined as successful in protection of cross-contamination and induction of safety in multi-purpose facility.

• Journal of the Korean Society of Earth Science Education
• /
• v.8 no.1
• /
• pp.1-11
• /
• 2015

The purpose of this study was to find out about the awareness and demands of pre-service and in-service elementary school teachers on STEAM education. For the purpose of this study, researcher administered survey questionnaires were conducted for 160 pre-service teachers and 191 in-service teachers who were sampled by convenience sampling method. The results were as follows. On the awareness and demand for knowledge and necessity on STEAM, first, on the understanding related knowledge, most respondents have heard of STEAM education(97.7%), and well aware of STEAM(91.4%) through the teacher training course(80.3%). Second, on the necessity, 60.4% respondents were located in "very necessary" and "necessary" entry. On the awareness and demand for applying STEAM, first, on the reasons of applying STEAM was to help the cognitive and affective development. Also 67.3% respondents would like to apply STEAM on their science class. The reason was necessity on STEAM, and the most suitable subject for blending with science of applying to STEAM was technology, on the other hand the most difficult subject was art. Second, on the effect of STEAM, most respondents had positive awareness on the all categories. Third, on the purpose of science education, also had positive awareness on the all categories of the purpose of science education. On the awareness and demand for blending ways of STEAM and improvements, first, on the blending ways of STEAM, topic centered blending related to real life had a majority. Second, on the improvements, to improve the STEAM education, many respondents pointed out the development of teaching and learning STEAM program and dissemination of related resources.