• 제목/요약/키워드: purge

검색결과 297건 처리시간 0.03초

Identification of the Major Volatile Components from Different Plant Organs of Foeniculum vulgare Mill.

  • Chung, Hae-Gon;Bang, Jin-Ki;Kim, Geum-Soog;Seong, Nak-Sul;Kim, Seong-Min
    • 한국약용작물학회지
    • /
    • 제11권4호
    • /
    • pp.274-278
    • /
    • 2003
  • The various plant organs of fennel (Foeniculum vulgare Mill.) were investigated to identify their volatile components using Dynamic Headspace (purge & trap). They showed slight differences concerning the volatile components both qualitatively and quantitatively. Results revealed that trans-anethole (12.65%) was the major compound in the leaf. The highest compound was ${\alpha}-pinene$ (28.78%), and trans-anethole (7.90%) was highly detected in the stem. The maximum values were 5.64, 4.59, 1.58, 1.51, and 1.04% for ${\alpha}-pinene,\;{\gamma}-terpinene,\;{\beta}-pinene$, 1,8-cineol and fenchone, respectively in the flower. However, very little trans-anethole was detected (0.27%) in the flower. From these results, it was suggested that the major components were different depending on the plant organs. However it was demonstrated that the related plant organs like flower-fruit and leaf-stem contained the similar components.

레이저 분말적층 방식을 이용한 금속 3D 프린터 개발 및 티타늄 합금 부품 제조공정 최적화 (Development of a Metal 3D Printer Using Laser Powder Deposition and Process Optimization for Fabricating Titanium Alloy Parts)

  • 정원종;권영삼;김동식
    • 한국레이저가공학회지
    • /
    • 제18권3호
    • /
    • pp.1-5
    • /
    • 2015
  • A 3D printer based on laser powder deposition (LPD), also known as DED (direct energy deposition), has been developed for fabricating metal parts. The printer uses a ytterbium fiber laser (1070nm, 1kW) and is equipped with an Ar purge chamber, a three-dimensional translation stage and a powder feeding system composed of a powder chamber and delivery nozzles. To demonstrate the performance of the printer, a tapered cylinder of 320mm in height has been fabricated successfully using Ti-6Al-4V powders. The process parameters including the laser output power, the scan speed, and the powder feeding rate have been optimized. A 3D printed test specimen shows mechanical properties (yield strength, ultimate tensile strength, and elongation) exceeding the criteria to employed in a variety of Ti alloy applications.

산소차단성 융착필름과 수축필름에 진공포장된 생육의 품질 특성과 저장성 비교 (Storage and Quality Characteristics of Vacuum-Packaged Fresh Meat with Oxygen Barrier Second-Heat-Seal Film or Shrink Film)

  • 이근택;윤찬석
    • 한국축산식품학회지
    • /
    • 제21권3호
    • /
    • pp.235-245
    • /
    • 2001
  • This study was conducted to evaluate the usefulness of Second-Heat-Seal film(SHS) as an alternative material to PVDC/EVA shrink film(VSP) being currently used by domestic meat packer for vacuum-packaging of fresh meat. The samples from pork loin and beef striploin and round were stored at 2$^{circ}C$ for 5 weeks and measured for the changes of microbial counts, color, pH, volatile basic nitrogen(VBN), purge loss and sensory parameters. The pork loins packed with SHS showed higher spermine contents during the whole storage period at 2$^{circ}C$, and lower counts in total microbes and lactic acid bacteria after 28 days storage at 2$^{circ}C$ than those packed with SHS tended to be lower than those packed with VSP over the storage time. Nevertheless, no significant differences were observed between two packaging treatments in the other quality parameters evaluated. It is therefore concluded that SHS film might have a possibility to substitute for VSP film for vacuum-packaging of fresh meat at least from a materials point of view.

  • PDF

ALD와 PEALD 공정에서의 파티클 형성과 박막 특성 비교

  • 강고루;김진태;차덕준;윤주영
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.253-253
    • /
    • 2013
  • 본 실험에서는 전구체(Precursor)로 TMA (Tris methyl Aluminum)를 사용한 ALD (Atomic Layer Deposition)와 PEALD (Plasma Enhanced Atomic Layer Deposition) 공정 중 발생하는 입자(particle)를 ISPM (In-Situ Particle Mornitor)로 관찰하였다. ALD과 PEALD 공정에서 Al2O3 박막을 형성하기 위해서 반응가스(Reactant)로 각 각 H2O와 O2 plasma를 사용하였다. 이러한 차이로 인해서 진공 챔버(Vacuum Chamber) 안에서의 각기 다른 매커니즘에 의해서 Al2O3의 박막이 형성된다. 또한 공정 중 발생할 수 있는 파티클(Particle) 생성 매커니즘의 차이점을 가진다. ALD의 경우 전구체와 반응가스 사이에 충분한 purge가 이루어지지 않거나 dead zone이 존재할 경우 라인과 챔버 상에 잔류한 전구체와 반응가스에 의해서 불완전한 반응물로 파티클이 생성될 수 있다. 반면 PEALD 경우는 반응가스(Reactant)로 O2 plasma를 극부(localization)적으로 형성하여 박막을 형성하므로 반응가스의 잔류의 영향은 없으나 고에너지의 플라즈마에 의해서 물리적 영향에 의한 파티클이 생성될 수 있다. 공정 중 발생하는 입자(Particle)은 수율 감소와 박막의 물성에 영향을 미칠 수 있다. 그러므로 두 공정 중 발생하는 파티클을 ISPM으로 관찰하였고, 각 공정에서 형성된 박막의 두께 균일도, 표면의 형상(morphology), 화학적 조성 및 전기적 특성을 측정하였다. 이를 통해서 ALD와 PEALD의 파티클과 박막특성을 비교하였다.

  • PDF

A Simple and Simultaneous Analysis of Volatile Halogenated Hydrocarbons in Indoor Air Using Personal Sampler

  • Jung, Won-Tae;Sohn, Dong-Hun
    • Journal of Korean Society for Atmospheric Environment
    • /
    • 제9권E호
    • /
    • pp.373-381
    • /
    • 1993
  • To understand the human exposure levels of volatile halogenated hydrocar-bons in ambient air, a new rapid and convenient analytical method for determination of the compounds in gaseous phase was evaluated and established. The method is based upon passsive diffusion to personal sampler containing adsorbent and solvent extraction followed by purge trap/ on-column cryof-ocusing method. A new method needs no special instrumentation for gas collection because it is based upon the passive diffusion principle. The typical chromatogram obtained in this study proved that rapid and simultaneous determination of target analytes was possible with good resolution. The developed method was successfully applied to determine the volatile halogenated hydrocarbons in indoor air and the values obtained by this new method were compared with those by direct suction method. The concentration of carbon tetrachloride, 1,1,2-trichloroethylene, chloroform showed the values below 400$\mug/m^3$ except the maximum of 1,513$\mug/m^3$ of chloroform. 1,1,1-Trichloroethane showed approximately 1,000 to 5,000$\mug/m^3$ range of diurnal fluctuation in indoor air.

  • PDF

반도체/LCD 제조공정에서의 Silane에 대한 ALARP개념의 화재 폭발 위험성평가에 관한 연구 (A Study on the As Low As Reasonably Practicable (ALARP)-Concept Risk Assessment of Silane in Semiconductor and LCD Process)

  • 이중희;황성민;우인성
    • 대한안전경영과학회지
    • /
    • 제12권4호
    • /
    • pp.93-98
    • /
    • 2010
  • 본 연구에서는, 반도체, LCD 공정에서 금속막을 증착하기 위하여 PECVD장비에 화재, 폭발 위험성과 독성을 가진 Silane가스를 사용하게 되는 장비인 gas cabinet, pipeline, VMB(Valve manifold box), MFC(mass flow controller)장비 등, 전반적인 시스템에 대하여 영국 HES의 ALARP개념을 도입하여 위험성 평가를 실시하여 문제점을 도출하고 대책을 강구 하는데 목적이 있고, 여러 가지 문제점중 절대적으로 수용 할 수 없는 Critical Risk로는 Gas Cylinder를 사용하여 Silane을 공급하고자 할 때에는 필히 Gas Cabinet을 사용하여 공급하여야 하고, Tube Trailer를 사용하여 공급하고자 할 때에는 필수적으로 Purge System을 갖추어 공급하여야 한다. 선택적으로 수용할 수 있는 High, Medium Risk로는 Gas Cylinder 또는 Tube Trailer를 사용하여 Silane을 공급하고자 할 때는 Inlet 부분에 RFO(Resticted Flow Orifice)를 설치하여 사용하고 Gas Supply Room에는 CO2소화설비를 적용하지 말고 Water Mist등 물 분무설비를 적용하여야한다.

활성탄 및 기능성 촉매제를 이용한 콘크리트의 포름알데히드 제거에 관한 실험적 연구 (Experimental Study on Formaldehyde Removal of Concrete by Using Activated Carbon and Functional Catalyst Materials)

  • 윤기원;이주헌;최명화
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
    • /
    • pp.729-732
    • /
    • 2008
  • 최근 실내공기질에 대한 관심이 집중되고 있는 가운데 이를 개선하고자 하는 노력이 다각도로 진행되고 있다. 본 연구는 기존의 친환경 마감재 적용 기술과 달리 콘크리트 자체에 활성탄과 흡착된 오염 공기를 분해할 수 있도록 기능성 촉매를 혼입함으로써 기본적인 물성과 포름알데히드 제거율을 시험하여 공기정화 효과를 분석하고자 하였다. 실험 결과 활성탄의 첨가량 증가에 따라 슬럼프는 감소하는 경향을 나타내었고, 압축강도는 큰 차이 없이 유사한 것으로 나타났다. 공기질 개선과 관련하여 포름알데히드 제거율을 시험한 결과 최대 80%까지 제거하는 것으로 나타났다.

  • PDF

파이썬 모듈과 정규표현식을 활용한 웹 취약점 탐색 자동화 봇 (Browser fuzzing and analysis using known vulnerability)

  • 김남규;김기환;이훈재
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2016년도 춘계학술대회
    • /
    • pp.749-751
    • /
    • 2016
  • 웹이 보편화되면서 많은 편리함을 가져온 동시에 주 사용자인 기업에는 대외비 문서서, 중요 자원의 유출, 개별 사용자에게는 개인 정보 유출 등의 보안 이슈 또한 가져왔다. 이에 관련 기관들은 웹에 대한 취약점을 정리한 리스트를 제시하였다. 본 지에서는 웹 취약점의 표준으로 널리 사용되는 OWASP top10의 리스트들을 웹에서 자동으로 탐색하고 문서화하는 봇의 구현 모델을 제시한다.

  • PDF

Effects of Saururus chinensis BAILL Extract in Rats with Experimentally Chronic Constipation: An application of Clinical Pathology and Digital Image Processing

  • Cho, Min-Seok;Choi, Seokyoun;Lee, Gilhyun;Ju, Mi Ha;Choi, Seok-Cheol
    • 대한의생명과학회지
    • /
    • 제25권4호
    • /
    • pp.339-347
    • /
    • 2019
  • Saururus chinensis (SC) belongs to the dicotyledonous plants, and its roots, leaves and flowers are white, so it is named three hundred and seconds. It is mainly distributed in Korea, China and Japan. In Korea, it is a native plant distributed in Jejudo and Jirisan areas. It has been known to improve blood circulation, anticarcinogenic effects and purge. However, studies of the efficacy on digestive system is few. This study was conducted to evaluate the effects of oral administered-SC extract in loperimide-induced constipation rats. The amount, weight and water content of the stools were measured. The number and type of stools in the large intestines were measured, and the amount of intestinal mucus was analyzed by serological analysis and histologic special staining. The severity of constipation in SC groups was significantly less than that in control group (non-SC rats). Digital Image processing also showed weaker inflammation on the large intestines of SC groups than that of control group (non-SC group). Especially, with increased dose dependent manner of SC extract, the amount and integrity of intestinal mucus increased. These results suggest that SC extract may prevent the symptoms of constipation.

Saturn V 발사체 1단(S-IC) 추진기관 시스템 연구 (The Review of Saturn V 1st Stage (S-IC) Propulsion System)

  • 홍용기;김철웅
    • 한국추진공학회지
    • /
    • 제19권2호
    • /
    • pp.73-80
    • /
    • 2015
  • Apollo Mission이 종료된지 거의 반세기가 지났지만, 지금도 Saturn V 발사체의 기술의 복원과 개량을 위한 연구가 활발하게 진행되고 있다. 본 연구에서는 Saturn V 발사체의 1단 로켓(S-IC)의 개발 과정과 엔진 퍼지, 포고현상 억제 방법, 연료탱크 가압 방식, 유압 및 공압 시스템의 운용 방식 등에 대한 특징들에 대해 조사하였다. S-IC의 추진기관 시스템의 특징에 대한 이해는 발사체 시스템의 이해를 도울 수 있고, 향후 발사체 개발 시에 시간, 비용 등의 절감 효과를 가져다 줄 수 있는 유용한 참고 자료가 될 것이라 예상된다.