• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권2호
• /
• pp.120-124
• /
• 2000

In this paper, the effect of magnetic field was measured on NOx(NO+NO2) removal and consumption power for wire-plate plasma reactor with magnetic field applied to electric field vertically. NOx of the simulated diesel engine flue gas were removed by the corona discharge generated by DC, AC and Pulsed voltages in wire-plate reactor. Consumption power increased with discharge voltage. However, when magnetic field was applied to electric field vertically, consumption power slightly decreased. NOx removal rate and arc transition voltage for plasma reactor with magnetic field were higher than those for plasma reactor without magnetic field. Consumption power decreased, however NOx removal significantly increased, when water vapour bubbled by dry air was put into simulated flue gas.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2104-2106
• /
• 2000

For general laser power supply. output of the secondary of the power transformer is connected to the rectifier and filter capacitor. The output of a rectifier is applied to a switching element in the secondary of the transformer. So, power supply is complicated and the loss of switching is considerably. In addition, according to increasing pulse repetition. charged energy of energy storage capacitor is not transferred sufficiently to flashlamp. and laser output efficiency decreases. In this paper, to improve laser efficiency. we designed and fabricated the power supply in which the SCR was turned on in zero point by the method of ZCC(zero crossing control)in result, laser output efficiency in creased by about 3.5% other than conventional supply. when a repetition rate was increased by 10[pps]. In 60[pps]. efficiency was about 20%.

• 한국전기전자재료학회논문지
• /
• 제19권6호
• /
• pp.591-598
• /
• 2006

The research was tried to investigate the hydrogen generation from water by the pulsed power plasma process. Hydrogen was generated by way of the electrical pulse power discharge process with the ultrasonic wave. The yield on the hydrogen generation was also studied with and without operating the ultrasonic generator, in which the applied high voltage was varied from 10 kV to 15 kV. Nitrogen and argon gases were used as working gases. As the results, the generation yield using the pure nitrogen gas is better than argon and mixed gases such as argon and nitrogen. Hydrogen concentration are significantly increased when the ultrasonic generator was operated with the electrical discharge simultaneously. It is increased with increasing the applied ultrasonic level as well.

• 한국표면공학회지
• /
• 제45권2호
• /
• pp.53-60
• /
• 2012

Modulated Pulse Power (MPP) magnetron sputtering is a new high-power pulsed magnetron sputtering (HPPMS) technology which overcomes the low deposition rate problem by modulating the pulse voltage shape, amplitude, and the duration. Highly ionized magnetron sputtering can be performed without arcing because it can be controlled as multiple steps of micro pulses within one overall pulse period in the range of 500-3,000 ${\mu}s$. In this study, the various waveforms of discharge voltage and current for micro pulse sets of MPP were investigated to find the possibility of controlling the strongly ionized plasma mode. Enhanced ionization of the sputtered metal atoms was obtained by OES. Large grained columnar structure can be grown by the strongly ionized plasma mode in the AZO deposition using MPP. In the most highly ionized deposition condition, the preferred orientation of (002) plane decreased, and the resistivity, therefore, increased by the plasma damage.

• 전기학회논문지
• /
• 제66권1호
• /
• pp.55-60
• /
• 2017

Capacitor Charging Power Supply(CCPS) is one of the most important components of a pulsed power system. The CCPS is widely used in source of lasers, accelerators and plasma generators. This paper presents design of a dead time control circuit and operation characteristics for stable high repetition rate of high voltage CCPS. The CCPS consists of battery, high voltage transformer and controller with a dead time control circuit. A dead time control circuit was simulated by PSpice. The performance test of the CCPS was carried out with a 7[nF] load capacitor at output voltage of 50[kV] and a pulse repetition frequency of 100[Hz]. As a result, we can verify that charging and discharging waveform is stable at 100[Hz]. The experiment results indicate that 3[ms] dead time made it possible for stable high repetition rate of 100[Hz]. This paper paves the way for designing an advanced CCPS which is more applicable outside experiments.

• 전력전자학회논문지
• /
• 제27권1호
• /
• pp.40-47
• /
• 2022

At present, the low-voltage, high-current type power supply is mainly used for effective sterilization in the ballast water treatment system. Research on PSFB converters without output capacitors has been ongoing. Such converters effectively treat ballast water without a separate disinfectant through electric pulses by applying a pulse-type power to the output electrode without an output capacitor. However, in the case of the pulse-type electrolysis treatment method, voltage overshoot can occur due to abrupt voltage fluctuations when the load changes, resulting in circuit reliability problems because of the output capacitorless system. Therefore, a new voltage control algorithm is required. In this paper, we will discuss voltage control for pulsed electrolysis topology without an output capacitor. The proposed voltage control method has been verified using Simulation and experiment. The usefulness of the proposed control method has been proven by the experimental results.

• 대한전자공학회논문지TC
• /
• 제46권12호
• /
• pp.14-21
• /
• 2009

본 논문에서는 7개의 MMIC 전력증폭기 칩과 박막기판을 결합하여 MIC 모듈을 구성함으로써 Ka-대역 중심주파수 영역에서 10 W 이상의 출력전력을 가지는 펄스모드 전력증폭기 모듈을 설계하고 제작하였다. 전력증폭기 모듈의 제작에는 밀리미터파 대역에 적합한 수정된 형태의 윌킨슨 전력분배기/합성기와 모듈의 조림과정에서 공진을 억제하고 작은 삽입손실 특성을 보이는 CBFGCPW-Microstrip 천이구조를 활용하였다. 전력용 MMIC 바이어스 회로에 사용된 큰 값의 바이패스 캐패시터에 의해 발생되는 펄스모드 출력전력의 감소를 개선하고자 TTL 펄스 타이밍 제어 기법을 제안하였다. 제안된 방법을 10 kHz, $5\;{\mu}sec$ 펄스모드로 동작하는 전력증폭기 모듈에 적용한 결과 펄스모드 동작시간을 200 nsec 이상 개선할 수 있었고 0.62 W의 출력전력을 향상시킬 수 있었다. 구현된 전력증폭기 모듈은 59.5 dB의 전력이득과 11.89 W의 출력전력을 보여주었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권4호
• /
• pp.1-7
• /
• 2015

The degradation of off-flavors which is 2-Methylisoborneol (2-MIB) and geosmin by means of ultrasound (US) and pulsed ultraviolet (PUV) irradiation and its combination with catalyst (wire mesh, wire mesh coated TiO₂, and TiO₂) and additive (H₂O₂) were investigated via water system. A combination treatment of TiO₂ and H₂O₂ heterogeneity with US (24 kHz) and PUV (6000 W) has shown improved results in destroying 2-MIB and geosmin, which may be attributed to chain reactions by the enhanced formation of hydroxyl radicals (·OH) through H₂O₂ dissociation and reactive oxide ions of TiO₂ addition. Rapid degradation of off-flavors occurred within 2 min under PUV process with H₂O₂ 100 mg/L (81.5% for 2- MIB; 79.3% for geosmin) and TiO₂ 100 mg/L (83.7% for 2-MIB; 79.8% for geosmin), while compared with H2O2 100 mg/L (58.4% for 2-MIB; 58.0% for geosmin) and TiO₂ 100 mg/L (59.2% for 2-MIB; 38.5% for geosmin) within 5 min under US process. Surprisingly, the emphasis was given on the comparison with the same injected energies between PUV and US on degradation efficiency. Based on the injected energy comparison, the US provided better degradation performance under equal input power of 200 kJ with H₂O₂ 100 mg/L, while compared with H₂O₂ 100 mg/L under PUV process. Our findings suggest that US can be more effective compared to PUV for the degradation of off-flavors in aspect of energy consumptions.

• 한국식품저장유통학회지
• /
• 제20권5호
• /
• pp.650-658
• /
• 2013

전기장의 세기 20 kV/cm, 펄스 폭 25 ${\mu}s$에서 펄스 빈도 35 Hz(40 kJ/L), 55 Hz(70 kJ/L), 72 Hz(100 kJ/L) 및 85 Hz(130 kJ/L)로 달리하여 투입 에너지를 기준으로 사과 착즙액의 PEF 연속처리 살균 효과를 분석한 결과 일반세균수은 초기 5.3 log CFU/mL에서 130 kJ/L의 에너지로 처리하였을 때 3.0 log CFU/mL로 감소하였고 효모 및 곰팡이는 초기 4.6 log CFU/mL에서 130 kJ/L의 에너지로 처리로 < $10^1$ CFU/mL 이하로 감소하였다. 그리고 대장균군수도 초기 4.7 log CFU/mL에서 130 kJ/L의 에너지 처리로 < $10^1$ CFU/mL 이하로 감소하였다. PEF 처리에 따른 가용성 고형분, 유리당 등에는 처리 조건에 따른 유의적 차이가 없었으며(p<0.05), 총 페놀함량, DDPH 및 FRAP 값은 처리조건에 따라 부분적으로 유의적인 감소를 보였지만 $65^{\circ}C$에서의 가열처리보다는 감소량이 작았다. 전기장 세기 20.0 kV/cm, 펄스 빈도 85 Hz, 펄스 폭 25 ${\mu}s$에서의 반복처리는 미생물 살균 효과가 제한적이었고 처리회수에 따라 총 페놀함량, DPPH 및 FRAP 값을 유의적(p<0.05)으로 감소시켰다.

• 한국산학기술학회논문지
• /
• 제17권10호
• /
• pp.9-12
• /
• 2016

특정 광 파장 영역대역에서 광 반사율을 갖는 다층 박막을 DC펄스 스퍼터링 공정으로 제작하기 위하여 공정변수가 다층 박막의 광학 특성에 미치는 영향이 연구되었다. 다층 박막 필름을 제작하기위한 시뮬레이션이 이루어졌으며, DC펄스 스퍼터링 공정을 이용한 저 굴절률의 $SiO_2$와 고 굴절률의 $TiO_2$ 박막의 광학 특성에 미치는 공정 변수 파라미터가 연구되었다. DC펄스 스퍼터링 파워 2kW, 아르곤 가스 200sccm(standard cubic centimeter per minute)기준조건에서 산소가스 비율 12% 범위에서 제작한 $SiO_2$박막은 굴절률 1.46이었고 산소가스 1% 비율에서 제작한 $TiO_2$박막은 굴절률 2.27이었다. 이들 박막으로 구성된 고 굴절률 박막/저 굴절률 박막/고 굴절률 박막의 3층 다층 박막 구조의 광학설계 시뮬레이션 결과와 측정된 광 반사율 특성결과는 파장 대역에 걸쳐 유사한 경향이 있는 것으로 측정되었다. 근적외선 780nm에서 1200nm파장 대역 영역에서 광 반사율 45%이상의 성능을 갖는 다층 박막 필름을 제작할 수 있었고 근적외선 차단 기능 박막으로 사용될 것으로 기대된다.