• 제목/요약/키워드: pulse discharge

검색결과 666건 처리시간 0.024초

멤리스터의 전기적 특성 분석을 위한 PSPICE 회로 해석 (PSPICE circuit simulation for electrical characteristic analysis of the memristor)

  • 김부강;박호종;박용수;송한정
    • 한국산학기술학회논문지
    • /
    • 제15권2호
    • /
    • pp.1051-1058
    • /
    • 2014
  • 본 논문에서는 PSPICE 프로그램을 이용하여 멤리스터 소자의 전기적 특성을 해석하였다. 멤리스터의 PSPCE 회로해석을 위한 모델링을 제안하고, 멤리스터의 전류-전압 특성을 분석하였고, 멤리스터의 입력전압에 따른 비선형 저항의 변화를 DC해석과 과도해석을 통하여 확인하였다. 또한, 멤리스터 저항의 직렬과 병렬연결에 따른 특성변화를 보았다. 한편, 멤리스터와 커패시터로 이루어진 M-C 회로를 구성하여 충전과 방전특성의 변화를 종래의 R-C회로와 비교분석하였다. 250 Hz의 구형파 입력신호 인가 시, 멤리스터-커패시터 회로의 경우에, 상승시간(Tr) 0.58 ms, 하강 시간 (Tf) 1.6 ms, 지연시간 0.6ms를 나타내었다.

High Performance ESD/Surge Protection Capability of Bidirectional Flip Chip Transient Voltage Suppression Diodes

  • Pharkphoumy, Sakhone;Khurelbaatar, Zagarzusem;Janardhanam, Valliedu;Choi, Chel-Jong;Shim, Kyu-Hwan;Daoheung, Daoheung;Bouangeun, Bouangeun;Choi, Sang-Sik;Cho, Deok-Ho
    • Transactions on Electrical and Electronic Materials
    • /
    • 제17권4호
    • /
    • pp.196-200
    • /
    • 2016
  • We have developed new electrostatic discharge (ESD) protection devices with, bidirectional flip chip transient voltage suppression. The devices differ in their epitaxial (epi) layers, which were grown by reduced pressure chemical vapor deposition (RPCVD). Their ESD properties were characterized using current-voltage (I-V), capacitance-voltage (C-V) measurement, and ESD analysis, including IEC61000-4-2, surge, and transmission line pulse (TLP) methods. Two BD-FCTVS diodes consisting of either a thick (12 μm) or thin (6 μm), n-Si epi layer showed the same reverse voltage of 8 V, very small reverse current level, and symmetric I-V and C-V curves. The damage found near the corner of the metal pads indicates that the size and shape of the radius governs their failure modes. The BD-FCTVS device made with a thin n- epi layer showed better performance than that made with a thick one in terms of enhancement of the features of ESD robustness, reliability, and protection capability. Therefore, this works confirms that the optimization of device parameters in conjunction with the doping concentration and thickness of epi layers be used to achieve high performance ESD properties.

표준편차와 확률분포를 이용한 모의전기설비에서 사고징후 검출 (Detection of Indication of Electric Accident in Simulated Electric Equipments Using Standard Deviation and Probability Distribution)

  • 지승욱;옥경재;김시국;이춘하
    • 한국화재소방학회논문지
    • /
    • 제23권3호
    • /
    • pp.11-16
    • /
    • 2009
  • 본 논문은 전기설비에서 사고 발생 징후를 검출하기 위한 방법을 기술하고 있다. 실험을 위해 전기설비의 부하는 백열전구로 구성하였고, 사고는 전기설비의 일부에 KS C IEC(Korea Standard C International Electrostatic Commission) 60112에 따른 내트래킹 시험장치를 연결하여 모의되었다. 모의사고는 정상상태에서 방전진전과 탄화형성 과정을 거쳐 트래킹파괴에 이르게 된다. 전기설비로부터 사고 징후 검출을 위해 전류 모니터를 이용하여 전기설비 전체의 전류를 측정하고 이를 분석하였다. 그 결과, 전류 파형의 특정 영역에서 사고의 진행 정도가 클수록 전류 펄스의 크기가 커지고, 발생 빈도도 증가하였다. 특히 전류파형에 대한 표준편차와 확률분포는 부하의 수와 무관하게 사고단계별로 뚜렷한 차이를 보였다.

경장영양과 중시정맥영양을 공급받는 외과계 수술 환자의 과대사 정도에 따른 영양 섭취량 및 생화학적 검사 결과 (The Outcome of Nutrition Support of Surgery Patients with Hypermetabolic Severity by Total Parenteral Nutrition and Enteral Nutrition and Biochemical Data)

  • 라미용;김은미;조영연;서정민;최혜미
    • 대한지역사회영양학회지
    • /
    • 제11권2호
    • /
    • pp.289-297
    • /
    • 2006
  • This study evaluated the nutrition intake and changes in laboratory data of surgery patients with hypermetabolic severity on nutrition support. From January 2002 to September 2002, 66 hospitalized surgery patients who had received enteral nutrition (EN, n=19) and total parenteral nutrition (TPN, n=47) for more than 7 days were prospectively and retrospectively recruited. The laboratory data was examined pre-operatively, and on the post-operative 1, 3, 7 day and at the time of discharge. The characteristics of the patients were examined for the hypermetabolic severity, The hypermetabolic scores were determined by high fever ($>38^{\circ}C$), rapid breathing (>30 breaths/min), rapid pulse rate (>100 beats/min) , leukocytosis ($WBC>12,000/{\mu}l$), leukocytopenia ($WBC>3,000/{\mu}l$), status of infection, inflammatory bowel disease, surgery and trauma. The scores for the hypermetabolic status were divided into three groups (mild 0-10, moderate 11-40, severe>41). According to the results of the study, 38.3% (n=23), 45.4% (n=30) and 19.6% (n=13) were in the mild, moderate, and severe groups, respectively. There was a decrease in the serum albumin level and weight loss according to the hypermetabolic severity. However, the white blood cells (WBC), fasting blood sugar (FBS), c-reactive protein (CRP), total bilirubin, GOT, and GPT increased. The nutritional intake was TPN (32.5 kcal/kg, protein 1.2 g/kg, fat 0.25 g/kg), EN (28.1 kcal/kg, protein 1.0 g/kg, fat 1.01 g/kg). The serum albumin, hemoglobin and cholesterol were higher in the EN group than in the TPN group. But the FBS, total bilirubin, GOT and GPT were higher in the TPN group than the EN group. In conclusion, there was a negative correlation between the changes in the laboratory data and the hypermetabolic severity. There was an increase in the number of metabolic complications in the TPN group.

Carbon nanotube field emission display

  • Chil, Won-Bong;Kim, Jong-Min
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제12권7호
    • /
    • pp.7-11
    • /
    • 1999
  • Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).

  • PDF

남·북한강과 경안천 합류 수역 팔당호의 수질 변동성에 대한 기상·수문학적 영향 (Hydro-meteorological Effects on Water Quality Variability in Paldang Reservoir, Confluent Area of the South-Han River-North-Han River-Gyeongan Stream, Korea)

  • 황순진;김건희;박채홍;서완범;최봉근;엄현수;박명환;노혜란;심연보;신재기
    • 생태와환경
    • /
    • 제49권4호
    • /
    • pp.354-374
    • /
    • 2016
  • 본 연구는 2012년 5월부터 2015년 12월까지 북한강과 남한강의 유입부를 포함하는 팔당호의 5개 지점에서 시공간적 수질 변동성을 강우 수문학과 비교 고찰하였다. 조사기간 동안 기초 수질요인들의 변동은 계절적 영향이 컸다. 특히, 수온성층은 수심이 깊은 댐 부근에서 형성되었고, 연도에 따라 빈산소 장기화도 관찰되었다. 질소(N) 계열 영양염의 증가는 유량이 빈약할 때 나타났고, 이때 $NH_4$는 하수 처리수의 영향을 크게 받아 $NO_3$와 상반되는 경향을 나타내었다. 인(P)의 증가는 유량이 크거나 극심한 가뭄이 지속될 때이었고, P 영양염 결핍도 빈번하게 관찰되었다. Chl-a의 증감은 유량 변동과 역상관 관계를 보였고, 그 값이 높을 때 AGP 값은 낮았다. 팔당호의 수질 변동성은 유역으로부터 하수 처리수(총량: $472{\times}10^3m^3d^{-1}$)의 오염원을 기반으로 한 유입, 방류 및 취수의 패턴에서 직간접적 관련성과 그 영향을 찾을 수 있었다. 또한 수질의 시공간적 변동 과정에서 기상(장마, 태풍, 이상강우 및 폭염더위) 수문(유량과 수위)학적 인자는 펄스, 희석, 역류, 흡수, 농축 및 침전 등 형태로서 작용하였다. 하천형 저수지인 팔당호의 수질 변동은 매우 역동적이며, 국내 최대 상수원의 오염 수준을 경감하기 위한 실효 대책으로 기상 수문에 기초한 육수학적 조사연구와 P-free 하수 처리 정책 실현의 필요성을 제안한다.