• Journal of the Korean Wood Science and Technology
• /
• 제25권2호
• /
• pp.75-80
• /
• 1997

This research has been examined to measure the degree of the fiber damage of ozonenation high yield pulp in the beating process. Ozone treated the TMP(Thermomechanical Pulp) and CTMP(Chemithermomechanical Pulp) of spruce and the CTMP of birch has been beaten to be reached 200ml(freeness) of its content. It had been studied the forming of fiber distribution by treatment for long fiber, short fiber, fine with the above method. As ozone treatment time gets longer, the pulp has showed the tendency of increasing the fiber content of 28, 48mesh. Ozone treated fiber has been increased long fiber content by being added softness. By given longer ozone treatment time, the TMP and CTMP of spruce has showed the decreasing of fiber content. On the contrary, CTMP of birch has showed the increasing its fiber content. It had proved that the results of difference are rather closer to the species of tree than closer to the kinds of pulp. The fiber content of over 200mesh which has created in beating process demonstrates the decreasing of its fiber content by getting longer ozone treatment time. The softness of fiber can be extracted by the lignin of fiber surface that had been formed by ozone treatment. Thus we assume that the fiber in the process of beating obtains less physical damage.

• 펄프종이기술
• /
• 제41권4호
• /
• pp.52-57
• /
• 2009

Soda and kraft pulping experiments were carried out in order to investigate the pulping characteristics of bamboo grown in Vietnam. The merit of kraft pulping was not observed for bamboo pulping from the viewpoint of delignification and screened pulp yield. The improvements of delignification during soda and kraft pulping of bamboo were observed by the addition of AQ. The bamboo pulp leaded the bulkier structure than those made from SwBKP and HwBKP. The average fiber length was 1.62mm which is shorter than those of SwBKP, but longer than those of HwBKP. It was found that the physical properties of bamboo pulp sheet could be varied by the pulping method, cooking condition, AQ addition, bleaching and refining etc.

• 펄프종이기술
• /
• 제45권4호
• /
• pp.16-20
• /
• 2013

Yellow poplar grown in Korea and imported eucalyptus were compared their kraft pulping characteristics and evaluated the replacing possibility of eucalyptus by yellow poplar. Difference between yellow poplar and eucalyptus were investigated in chemical composition and fiber morphology. Yellow poplar kraft pulp resulted in the higher yield, longer fiber length and thicker fiber, and higher pulp strength than that of eucalyptus. More xylan survived in eucalyptus than yellow poplar during kraft pulping, which led to similar pulp yield even though polysaccharides in Eucalyptus was 4.5% less than in yellow poplar. Longer and thicker yellow poplar pulp fiber resulted in better beating response and pulp strength properties.

• 펄프종이기술
• /
• 제34권4호
• /
• pp.22-29
• /
• 2002

This research was conducted to investigate the morphological characteristics of fine fibers produced during beating process of high yield pulp treated with ozone and the distribution of lignin in the produced fine fibers. Thermomechanical(TMP) pulp and chemithermomechanical(CTMP) pulp of spruce and CTMP of white birch were beaten to reach 200$m\ell$ CSF, and then the fine fibers were observed using ultraviolet microscope. The fine fibers produced from TMP and CTMP of spruce using treated with ozone for 15 minutes were fragments of fiber surfaces or cell corners, and most of them contained lignin. However, lignin was not observed in the fibers after 15 minutes of ozone treatment. The fine fibers produced from CTMP of white birch were broken pieces or fragments of fiber surfaces or cell corners. The lignin was observed in the fibers until 5min of ozone treatment but no lignin was observed after 5 minutes of ozone treatment. Different morphological characteristics of TMP and CTMP explained both the different morphological characteristics and the distribution of lignin observed in the fine fibers produced from the beating process of TMP and CTMP treated with ozone.

• 펄프종이기술
• /
• 제44권1호
• /
• pp.65-73
• /
• 2012

Nowadays, the concern on the environmental load of bleaching process gave rise to the process of ECF(elemental chlorine free) and TCF(total clorine free). These sequences are based on oxygen-derived compounds such as oxygen, ozone, and hydrogen peroxide which is used as a typical eco-friendly bleaching agent. In this study, paper mulberry pulp was bleached with hydrogen peroxide and some bleaching process were accompanied with ultrasonication in order to increase the bleaching efficiency. The best bleaching efficiency of paper mulberry pulp was obtained in the condition of hydrogen peroxide and ultrasonication(20 kHz) bleaching system at $45^{\circ}C$ for 30 min. The brightness and kappa number of paper mulberry pulp were gained to 5.09% and 3.52 respectively. and yield was slightly loosed to 2%. Therefore, the efficiency of hydrogen peroxide and ultrasonication bleaching system of paper mulberry pulp was superior to the conventional hydrogen peroxide bleaching system. Magnesium sulfate acted as a bleaching stabilizer for the increasement of yield. As a result, the yield and viscosity were increased to 2.2% and 12% respectively.

• 펄프종이기술
• /
• 제33권2호
• /
• pp.8-16
• /
• 2001

To manufacture toilet tissue with ONP (old newspaper), the effect of fractionation fiber (R150, R100, R70 mesh) and bleaching(P, PY), blending (70/30) with MOW(mixed office wastepaper) or WL(white ledger) and the addition of softener on the optical and mechanical properties were studied. Considering the pulp yield, brightness and strengths, fibers of R100 mesh fraction were proper to be produced to toilet paper from ONP. This pulp showed the pulp yield of 76.8%, brightness of 50.2% ISO and tensile index of 21.1 Nm/g. By the bleach with P and PY stages, the brightness of the pulps increased up to 60.3% ISO and 61.8% ISO, respectively. When blended with MOW (57.3% ISO) or WL (76.2% ISO), the brightness of the former increased up to 58.5% ISO, the latter up to 63.6% ISO. The strengths of pulp blended with WL were higher than those of fractionated pulp from 100% ONP, however there was no difference in strengths between fractionated pulp and blended pulp wth MOW. While the addition of softener improved the softness of paper, but it decreased strengths of pulp and extended dispersing time in water.

• 펄프종이기술
• /
• 제48권3호
• /
• pp.44-50
• /
• 2016

As a raw material for pulp and paper industry, Moso bamboo, Timber bamboo and Henon bamboo pulps were prepared by soda or soda-anthraquinone(Soda-AQ) pulping process. Soda-AQ pulp yields was higher in Henon bamboo (43.2%) than in Moso bamboo or Timber bamboo (32.7-39.2%), but quite lower than hardwood species. In Kappa number comparison, Henon bamboo pulp showed lower (16.6) with 50 min cooking to $170^{\circ}C$ than that of Moso bamboo (22.8) and Timber bamboo (18.9) with 90 min cooking to $170^{\circ}C$. Fiber length of Timber bamboo soda pulp had higher (1.46 mm) than that of Moso bamboo or Henon bamboo (1.18-1.36 mm). All three bamboo pulps showed longer average fiber length than commercial hardwood pulp. With higher pulp yield and lower Kappa number, Henon bamboo is better raw material for pulp than Moso bamboo and Timber bamboo.

• 펄프종이기술
• /
• 제31권3호
• /
• pp.77-82
• /
• 1999

The delignification, and optical and strength properties were determined to compare the ozone treatment effect in hardwood and softwood CTMPs. During ozone treatment, the delignificantion was much higher in hardwood pulp than in softwood pulp . The optical and strength properties which were very dependent upon the lignin content in pulp were significantly improved in the case of hardwood pulp . The ozone treatment of high yield pulp was more effective in hardwood pulp than that of softwood pulp.

• 펄프종이기술
• /
• 제45권1호
• /
• pp.6-12
• /
• 2013

TFormic acid-hydrogen peroxide (or performic acid) pulping process needs milder reaction condition than other chemical pulping process. Two-step formic acid-hydrogen peroxide pulping process can produce the chemical pulp with similar pulp yield and lignin content compared with soda-anthraquinone process. Formic acid-hydrogen peroxide pulp can be produced less xylan content than other alkaline pulps, which favor for dissolving pulp production. Formic acid-hydrogen peroxide pulp showed better response beating than soda-anthraquinone(AQ) pulps with reaching target freeness with less beating. Also, formic acid-hydrogen peroxide pulp had better tensile index at similar freeness level compared with soda-AQ pulps.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.504-507
• /
• 2000

Enzymatic hydrolysis of cellulose was studied with emphasis on the effect of cellulase loading and pulp sludge concentration on glucose yield. Enzyme loading appeared to have a significant effect on glucose yield. Chemical pretreatment had no effect on enzymatic hydrolysis of pulp sludge. High glucose yield was obtained from enzymatic hydrolysis, especially at sludge concentrations lower than twenty percent. The optimum concentrations of crude cellulase and ${\beta}-glucosidase$ were 5 U/mL and 8 U/mL, respectively, considering the amount of enzymes used and glucose produced.