• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제30회 추계학술대회
• /
• pp.213-218
• /
• 1999

Friction and wear characteristics of novolac resin-based friction materials reinforced with aramid pulp and potassium titanate were investigated by using a pad-on-disk type friction tester. Friction properties such as friction stability, surface morphology, and wear rate varied according to the relative amount of aramid pulp and potassium titanate. The friction materials reinforced with both aramid pulp and potassium titanate showed superior friction stability and wear resistance due to the formation of durable transfer layer.

• Restorative Dentistry and Endodontics
• /
• 제6권1호
• /
• pp.105-107
• /
• 1980

A total of 125 extracted maxillary first molars were used to study the configuration of the floor of the pulp chamber. The specimens were ground and the pulp chamber was examined with a magnifying glass and explored with sharp explorer. The study showed the shape of the pulp chamber, number of root canals, and type of canal orifice. The results were as follows; 1. In so far as observing the shape of the pulp chamber of the teeth, 50.4% of the teeth were trapezoid, 20.8% were inverted trapezoid, 18.4% were rectangle and 10.4% were triangle shape. 2. 71.2% of the specimens have 3 root canal orifices, and 28.8% have 4 root canal orifices. 3. 71.2% of the specimens have 1 mesiobuccal canal orifice, 23.2% have 2 mesio-buccal canal orifices joined by a groove, and 5.6% have 2 mesio-buccal canal orifices seperated each other.

• Restorative Dentistry and Endodontics
• /
• 제7권1호
• /
• pp.53-57
• /
• 1981

A total of 130 extracted human maxillary second molars were used to study the configuration of the floor of the pulp chamber. The specimens were ground and the pulp chamber was examined with a magnifier and explored with sharp explorer. The study showed the shape of the pulp chamber, number of root canals, and the type of canal orifice. The results were as follows; 1. In so far as observing the shape of the pulp chamber of the teeth, 16.9% of the teeth were quadrilateral, 70.0% were triangle and 13.1% were ovoid shape. 2. 13.1% of the specimens have 4 root canal orifices. 73.9% have 3 root canal orifices, 11.5% have 2 root canal orifices and 1.5% have single orifice. 3. 13.1% of the specimens have 2 mesio-buccal canal orifices and among the teeth those have 3 canals, 20.8% show 'Y' shape, 29.1% show straight line and 23.8% show obtuse triangle shape.

• 펄프종이기술
• /
• 제43권3호
• /
• pp.106-112
• /
• 2011

The effects of alkaline treatment on the WRV, crystalline structure and sheet structure of softwood and hardwood bleached kraft pulp were investigated. Sodium hydroxide and sodium carbonate were used as chemicals for alkaline treatment and two levels of alkali dosage (5%, 10%) were applied respectively. Alkali treated and untreated pulp were refined to three levels (550, 450 and 350 mL CSF). WRV of the alkali treated pulps depended on the alkaline type and concentration. It was found that the crystalline structures of softwood and hardwood pulp were not changed by refining. Sodium carbonate and lower concentration of sodium hydroxide treatment did not caused any modification of cellulose crystalline structure, while higher concentration of sodium hydroxide treatment caused the partial modification of cellulose crystalline structure. Alkaline treatment of hardwood bleached kraft pulp led to the shrinkage of fiber diameter and bulky structure of sheet. Alkaline treatment of softwood bleached kraft pulp did not cause the significant change in fiber shrinkage and bulk of sheet.

• Restorative Dentistry and Endodontics
• /
• 제22권2호
• /
• pp.782-791
• /
• 1997

Glial fibrillary acidic protein(GFAP) are a group of intermediate filaments that are distributed in the cytoplasm of many type of glial cells. The purpose of this study was to determine change of GFAP immunoreactivity(GFAP-IR) in rat trigeminal ganglion satellite cells in response to pulp exposure. The immunohistochemistry was carried out using the avidinbiotin-peroxidase complex(ABC) method and subsequently stained with AEC(3-aminoethyl-9-carbasol). 1. Contol group; Central root astrocytes had strong GFAP-IR, but ganglion satellite cells occasionlly had GFAP-IR. This reaction patterns of ganglion satellite cells was not concenturated in any specific region of trigeminal ganglion. 2. Three day pulp exposure group; There was a highly GFAP-IR in satellite cells of trigeminal ganglion in maxillary region. GFAP-IR in neighboring mandibular and ophthalmic regions was less intense compared to maxillary region. 3. Seven day pulp exposure group; In this group, GFAP-IR that was increased compared to control group was seen in the maxillary region. But GFAP-IR was less intense compared to three day pulp exposure group. These results suggest that GFAP in satellite cell increase in specific region of trigeminal ganglion after pulp exposure and offer useful tool in trigeminal pain research.

• Restorative Dentistry and Endodontics
• /
• 제29권3호
• /
• pp.226-232
• /
• 2004

Use of electric pulp testing elicits painful response in vital teeth. In this study, we examined the excessive time from pain feeling to stimulation disconnection in clinical situation. D626D (Parkell Inc., USA.) scan type electric pulp tester was used in total of 23 young healthy individuals. Each of the right central incisors and first premolars were used as testing teeth. Stimulation disconnection was achieved by EMG in anterior belly of digastric muscle, finger span, and voice and the excessive stimulation time over the sensory thresh-old was recorded. As a result, we found that the short responses before the stimulation disconnection appeared following order：EMG, finger span, and voice. The EMG disconnection is suggested to be used to reduce the excessive stimulus time in electric pulp testing.

• 펄프종이기술
• /
• 제38권5호
• /
• pp.24-30
• /
• 2006

This study was performed to characterize inverse emulsion type cationic polyacrylamide (PAM) and to compare with powder and salt dispersion type PAMs as a retention and drainage aid. Salt dispersion type PAM has defects of high amount of salt which increases conductivity of white water, low active polymer contents and relatively worse retention and drainage properties than others because of its low molecular weight. Powder type PAM has benefit of high active polymer contents and good retention and drainage properties, but defects of low dissolution speed and insoluble particle generation were observed. However, inverse emulsion type showed the best retention and drainage aids among them by controlling molecular weight and morphology easily and it had relatively higher active polymer contents and better solubility.

• Restorative Dentistry and Endodontics
• /
• 제37권1호
• /
• pp.61-65
• /
• 2012

Patients with diabetes mellitus show delayed wound healing and increased susceptibility to infection. Therefore, the effects of diabetes on pulpal and periodontal healing should be taken into consideration when treating diabetic dental traumatized patients. This case presents the treatment for dental traumatized 20 yr old female with uncontrolled type II diabetes. The traumatized upper central incisors had showed pulpal healing in early days. However, 7 mon after the trauma, the teeth had been diagnosed with pulp necrosis with apical abscess. Eventually, non surgical root canal treatment on the teeth had been performed.

• 펄프종이기술
• /
• 제37권3호
• /
• pp.66-73
• /
• 2005

This study was performed to understand the changes in wood extractives, mainly acetone extracts, in pine woods (Pinus densiflora and Pinus rigida) treated by three blue stain fungi (BSF) such as native BSF in Korea, Leptographium sp., screened Albino strain(BSFcs-1) and commercial Cartapip and fungicide, Wood guard. In addition their pulping and bleaching properties were investigated. BSF treatment has significantly reduced acetone extracts, $25.1{\sim}30.4%$ decreasing in red pine and $22.9{\sim}28.1%$ in pitch pine. Three week aging treatment showed about 20% decreasing in red pine and 19.3% in pitch pine. There were not so significant differences in extracts reduction among native BSF and Albino-type strains (Albino strain, BSFcs-1, and commercial Cartapip). But fungicide, Wood guard, treated wood showed relatively lower decreasing rates of extractives, 14% in red pine and 10.1% in pitch pine. Therefore it is understandable that the fungicide could protect the wood from blue stain fungi attack, but has no effect on its extractive reduction. Concerned to pulping properties of BSF and fungicide treated woods, red pine and pitch pine, optimum pulping condition was 20% active alkali, wood to liquor ratio 1 to 6, $170^{\circ}C$, and 2.5 hr. In the case of BSF woods, optimum pulping condition was same as the sound wood, $43.5{\sim}45%$ of pulp yields and $1.3{\sim}1.45%$ of rejects. Screened pulp yield of fungicide treated wood was lower than those of BSF treated woods. Rejects in pulps were higher in fungicide-treated wood than BSF treated woods. Bleaching pulp yields were ranged of 92 to 93.5%. BSF, Cartapip and fungicide treated woods resulted in lower brightness of $55{\sim}58%$, but Albino-type strain(BSFcs-1) $61.3{\sim}62.3%$, very similar to untreated one. Therefore bleaching chemicals could be saved in the processing of chemical pulping.

• 펄프종이기술
• /
• 제32권3호
• /
• pp.32-38
• /
• 2000

This study was carried out to determine the effect of the type of plastic pigment on the coat-ing structure and printability of coated paper. Three kinds of plastic pigments(solid-bead type binder type and hollow type) were used for hti purpose. IN this research it was observed that particle shape and structure of plastic pigment had influenced the rheology of coating color the state of packing and the properties of coated paper. Inorganic pigments used in this research were platelike kaolin clay and rhombic calcium carbonate. Three kinds of plastic pigments were blended with two inorganic pigments respec-tively. The combination of pigments were carried out(1) to determined the effect of particle structure of plastic pigment on the state of dispersion of coating color(2) to observe the effect of calendering temperature on the property of coated paper prepared with different plastic pigments. The data indicated that binder and hollow type plastic pigment gave the best results in improving the properties of coated paper such as paper gloss opacity and air pet-meability.