• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.2
• /
• pp.70-76
• /
• 1999

This study was to measure the potential of nonwoody fibrous material, kenaf. Whole stalk of kenaf, Hibiscus cannabinus was separated by two parts of bast and core portion, and cooked separately by alkaline method. Morphological characteristic was evaluated using confocal laser scanning microscope (CLSM) and fiber quality analyzer(FQA). The strength properties of handsheets, made by different mixing ration between kenaf base and core fibers, were measured. Cross-sectional area of bast fibers was smaller than that of core fibers, but the bast fibers had a thick cell wall and narrow lumen area. Bast fibers were longer in length than core fibers. Core fibers had thin cell walls, broad lumen areas, and short lengths, and they had collapsed shape even in water. These characteristics of core fibers affected strength properties of handsheet positively. When the amount of core fibers increased, the strength properties of handsheet were increased. When the amount of bast fibers increased, the handsheet had rougher surface and higher air permeability.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04b
• /
• pp.227-231
• /
• 1999

Condebelt drying provides opportunities not only of improving the strength properties and saving of drying energy but also of reducing the basis weight or increasing the utilization of recycled furnishes. In this paper general overview of the Condebelt press drying will be described and the effects of the process variables in Condebelt press drying including drying temperature, pressure, drying time and moisture content of the sheets on the paper properties is discussed. The experiment was performed with a static rig and Korean OCC was used as a principal raw material. Significant improvement in sheet density, compression strength, tensile strength, surface smoothness, etc. was obtained when Condebelt drying was applied. Control of pressure and inlet dryness was found to be very critical in improving sheet properties. Mill experiences from Dong Il Paper Mfg. Co., Ltd is briefly described.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.433-440
• /
• 2006

A fiber processing method, which might be an alternative for conventional refining process, was introduced. The method consists of repetitive, gentle, mechanical impacts on fiber, and ensued fiber uncurling process. This method was very effective for OCC and BCTMP for increasing WRVs (water retention value) while keeping fiber lengths from shortening. For OCC and BCTMP, gentle mechanical impacts on fibers using Hobart mixer increased breaking lengths and tear strengths simultaneously at fast drainage level, and straightening fibers using kady mill increased those strength properties further. For SwBKP and HwBKP, only mechanical impacts using the mixer were effective on increasing tensile and tear strength at fast drainage, but not kady mill treatment. The strength increases of BCTMP by this alternative fiber processing method were exceptionally high. An extensive engineering development should be followed to actualize this fiber processing mechanism in an energy-effect way.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.3
• /
• pp.22-28
• /
• 1998

The blended enzymes were applied for OCC recycling system to use the selective activities of various enzymes. Cellulase and hemicellulase were very effective in terms of the strength of recycled paper The effect of the addition of amylase on the drainage improvement indicates that the starch, which was used as an adhesive of corrugated container, deteriorates the drainage property in OCC recycling system. From the result of Scheffe's analysis, the combination of cellulase and amylase (50/50, w/w) were the most effective in improving the drainage properties with increased strength.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.3
• /
• pp.80-87
• /
• 2011

This research was performed to investigate the physical and mechanical properties of Chanhoji manufactured with the traditional method. This research would provide a basic information for its application in the manufacture of Korean-style house. A piece of Changhoji was manufactured to have a weight of 3.75 g. The weight was increased with the basic weight and no increase was not found on its density. The strength properties of Changhoji are superior to a copying paper, and the quality showed the first grade in Korean Standard (KS M 7301). The air resistance varied with the thickness from 2 to 19 seconds, but it showed better performance than a copying paper having 38 seconds. This research would be used for the practical use in understanding the ventilation and lightening properties of windows and doors in Korean-style house.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2005.11a
• /
• pp.127-139
• /
• 2005

It is very difficult to export the fresh agricultural products to long distant countries such as America and EU without any damage. Fresh exporting products would be met very hazardous environments such as hot and cold weather, heavy trembles with rolling and pitching. Therefore, care should be taken on tight fastening the products inside the container and keeping the designated temperature and relative humidity. The physical strength of outer box should be applied differently because each agricultural product has its own character for packaging. There have been many agricultural products researches for export packaging to the U.S.A. so far. However they have never got desirable results which enough to apply it in real. The main purpose of this research is to develop optimum compressive strength of corrugated fiber board box which would be used to American export packaging of fresh agricultural products such as perilla leaves, green red pepper and spinach.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.11a
• /
• pp.201-206
• /
• 2006

Embossing treated fruit bagging paper was prepared with newly designed embossing roll and mechanical properties of fruit bagging paper were evaluated. The embossing technology was developed. First of all, embossing roll was designed in Ginyong Embo(Co) for the embossing process of fruiting bag. The embossing treated fruit bagging paper was manufactured in Agro(Co) at plant scale. The mechanical properties of embossing paper was investigated and operation efficiency of bagging was tested at field. The properties of embossed paper was quit satisfied for fruiting bag for cultivation of apple and pears.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.11b
• /
• pp.79-83
• /
• 1999

A cationic demand(CD) is a very useful indication for determining the optimum dosage rate of retention aids to the papermaking stock at the wet end. Polyelectrolyte titration has been most often used to determine a CD. Highly accurate results can be obtained by this method when the ionic strength of sample is low. But this is accompanied by the serious errors when the ionic strength is higher than that corresponding to 20 milli molar(mM) monovalent, 2 mM divalent or 0.2 mM trivalent ions because of no occurrence of the end point of titration. Therefore, it is very difficult or almost impossible for the conventional method to be applied to the industrial suspensions such as papermaking stock and industrial waste water. Then a novel method using chromophoric labeled cationic polymer which can be applicable to the sample with high ionic strength has been developed.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.3
• /
• pp.9-14
• /
• 2008

Agar-agar extracted from red algae was used as a surface sizing material for paper after filtering, bleaching, and viscosity adjustment by oxidative depolymerization. Oxidized starches from corn and tapioca were compared to agar-based surface size in the respects of paper surface modification, strength improvement, and printability. Agar-based surface size showed high strength improvement and good printability as much as starch-based ones except film forming ability, which may be improved by adding additives, and demonstrated its great potential to be used as inexpensive and high quality surface size in future.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.3
• /
• pp.44-51
• /
• 2001

Sedimentation characteristics such as SS, $BOD_5$, COD removal efficiency of waste water in the toilet paper mill using milk carton were examined. Optimum dosage of coagulant, rapid mixing time and slow mixing time were determined by turbidity, SS, COD, $BOD_5$ and then equation for treatment efficiency was suggested. Mechanical strength of floc was determined by turbidity. For the coagulant, polyacrylamide (PAM) is more efficient for removing pollution than the aluminium sulfate. Effective mixing ratios of PAM and aluminum sulfate to remove pollution are 70:30 and 30:70. The lowest turbidity was showed when rapid mixing at 300 rpm after coagulant injection was applied. That which indicates the highest point of flocs mechanical strength.