• Restorative Dentistry and Endodontics
• /
• 제34권5호
• /
• pp.406-414
• /
• 2009

본 연구의 목적은 심부 상아질과 치수실 상아질에 $H_2O_2$를 각기 다른 적용시간과 농도로 적용하였을 때, 레진수복물과의 미세인장결합강도에 미치는 영향을 평가하는 것이다. 준비된 각각의 치아에 전형적인 근관와동을 형성하고 다음과 같이 무작위로 1개의 대조군과, 4개의 실험군으로 나누었다: 1군, 전처리를 시행하지 않았다; 2군, 20% $H_2O_2$를 20분, 10분, 5분간 적용하였다; 3군, 10% $H_2O_2$를 20분, 10분, 5분간 적용하였다; 4군 5% $H_2O_2$를 20분, 10분, 5분간 적용하였다; 5군, 2.5% $H_2O_2$를 20분, 10분, 5분간 적용하였다. 위와 같이 처리한 후 와동 내를 Superbond C&B(Sunmedical, Co., Shiga, Japan)로 충전하였다. 각 치아는 $37^{\circ}C$ 증류수에 24시간 저장한 뒤 심부 상아질과 치수실 상아질로 잘라 미세인장결합강도 시험을 시행하였다. 각 군에서 측정된 미세인장결합강도를 3-way ANOVA와 Tukey post hoc test로 통계 처리하였다(p < 0.05). 실험 결과 모든 군에서 심부 상아질(D1)의 미세인장 결합강도가 치수실 상아질(D2)보다 높게 나타났다. 평균 결합강도는 $H_2O_2$의 농도와 적용 시간이 증가할수록 감소하였다. 통계분석에서 상아질의 깊이, $H_2O_2$ 농도와 적용 시간이라는 세 가지 변수간의 교호작용 효과는 없으나(p > 0.05). 상아질의 깊이와 $H_2O_2$ 농도 사이, $H_2O_2$ 농도와 적용 시간 사이에서는 교호작용 효과가 있었다(p < 0.05). SEM 관찰에서는 $H_2O_2$의 농도가 증가할수록 상아세관이 좀 더 개방된 양상을 보였다.

• 대한소아치과학회지
• /
• 제10권1호
• /
• pp.25-33
• /
• 1983

With electron microscope, author studied on the pulp structure of human primary tooth in shedding stage. Non-carious human primary molar teeth were selected for this study. Using standard methods, specimens were sectioned and examined by light and electron microscope, The results were as follows; 1. In coronal pulp, odontoblasts were replaced by multinucleated odontoclasts, which contained a large number of mitochondria of varying shape and vacuoles in cytoplasm. Where odontoclasts were in contact with tooth surface, the characteristic ruffled border and clear zone were observed. 2. Fibrous tissue with plentiful collagen fibers and fibroblasts was observed adjacent to the dentin in the pulp. Fibroblast contained a number of mitochondria and well-developed rough-surfaced endoplasmic reticulum. 3. Inflammatory cells were observed in the pulp and active fibroblasts could be seen between inflammatory cells. In many cases, cervical epithelium proliferated toward absorbed area. 4. Inflammatory cells consisted of a number of lymphocytes, polymorphonuclear leukocytes, plasma cells and macrophages. Macrophage containing lysosomes in digestive state or phagocyting PMN could be seen. 5. In the primary molar of delayed root resorption, odontoblast layer, zone of Weil and cell-rich zone could be seen at roof of pulp chamber and odontoblast in this area cont과ained some lipid droplets.

• Restorative Dentistry and Endodontics
• /
• 제47권1호
• /
• pp.4.1-4.13
• /
• 2022

Objectives: This study evaluated the effects of different smear layer preparations on the dentin permeability and microtensile bond strength (µTBS) of 2 self-etching adhesives (Clearfil SE Bond [CSE] and Clearfil Tri-S Bond Universal [CTS]) under dynamic pulpal pressure. Materials and Methods: Human third molars were cut into crown segments. The dentin surfaces were prepared using 4 armamentaria: 600-grit SiC paper, coarse diamond burs, superfine diamond burs, and carbide burs. The pulp chamber of each crown segment was connected to a dynamic intra-pulpal pressure simulation apparatus, and the permeability test was done under a pressure of 15 cmH₂O. The relative permeability (%P) was evaluated on the smear layer-covered and bonded dentin surfaces. The teeth were bonded to either of the adhesives under pulpal pressure simulation, and cut into sticks after 24 hours water storage for the µTBS test. The resin-dentin interface and nanoleakage observations were performed using a scanning electron microscope. Statistical comparisons were done using analysis of variance and post hoc tests. Results: Only the method of surface preparation had a significant effect on permeability (p < 0.05). The smear layers created by the carbide and superfine diamond burs yielded the lowest permeability. CSE demonstrated a higher µTBS, with these values in the superfine diamond and carbide bur groups being the highest. Microscopic evaluation of the resin-dentin interface revealed nanoleakage in the coarse diamond bur and SiC paper groups for both adhesives. Conclusions: Superfine diamond and carbide burs can be recommended for dentin preparation with the use of 2-step CSE.

• 대한치과보철학회지
• /
• 제31권1호
• /
• pp.1-10
• /
• 1993

The purpose of this study was to evlauate the microleakage of 3 dentin bonding agents using different dentin pretreatment method under simulated physilogic pressure in cementing the porcelain laminate veneer. Noncarious 60 human maxillary molars were selected and randomly assigned to 4 groups of 15 each. The group with the margin placed on the enamel was classified as the control and the groups with the margin placed on root surface were subdivided into 3 groups according to the dentin bonding agents used. The group using All Bond 2 was classified as experimental group 1, the group using Scotchbond MP was classified as experimental group 2, and the group using Gluma was classified as experimental group 3. Roots were removed at 3mm below the cementoenamel junction, and reductions of the teeth for the porcelain laminate veneer were done on the mesial 1/2 of the buccal surface of each teeth. The pulp was extirpated and the pulp chamber was cleaned with 37% phosphoric acid for the patency of dentinal tubule. Under simulated physiologic pressure, porcelain laminate veneers were cemented to the teeth using each dentin bonding agent and luting cement. After cementation, all samples were stored at 36t in water for 24 hours and thermocycled for 1500 cycles, then immersed in 0.5% basic fuchsin solution and the teeth were sectioned longitudinally by using diamond saw and the extent of microleakage was measured. The following results were obtained, 1. Microleakage was observed in a few samples of control group but all the samples of experimental groups. 2. The control group showed the less extent of microleakage than the experimental groups. In experimental groups the experimental group 1 & the experimental group 2 showed similiar extent of microleakage and the experimental group 3 showed the greater extent of microleakage than other groups. Conclusively, practicing the porcelain laminate veneers in the clinic, although the margin of the porcelain laminate veneer should be placed on enamel, in the case that it is inevitable to place the margin of the porcelain laminate veneer on the root surface, it is recommened to use dentin bonding agents which use no dentin pretreatment or a dentin pretreatment which can leave the smear plugs.

• Restorative Dentistry and Endodontics
• /
• 제44권3호
• /
• pp.25.1-25.10
• /
• 2019

Objective: The aim of this study was to evaluate discoloration of teeth undergoing regenerative endodontic procedures (REPs) using blood clot or platelet-rich fibrin (PRF) as the scaffolds and different calcium silicate-based materials as the intracanal coronal barriers in an ex vivo model. Materials and Methods: Forty-eight bovine incisors were prepared and disinfected using 1 mg/mL double antibiotic paste (DAP). The specimens were then randomly divided into 2 groups (n = 24) according to the scaffolds (blood or PRF). After placement of scaffolds each group was divided into 2 subgroups (n = 12) according to the intracanal coronal barriers (ProRoot MTA or Biodentine). The pulp chamber walls were sealed with dentin bonding agent before placement of DAP and before placement of scaffolds. The color changes (${\Delta}E$) were measured at different steps. The data were analyzed using 2-way analysis of variance. Results: Coronal discoloration induced by DAP was not clinically perceptible (${\Delta}E{\leq}3.3$). Regarding the type of the scaffold, coronal discoloration was significantly higher in blood groups compared with PRF groups at the end of REP and after 1 month (p < 0.05). However, no significant difference was found between PRF and blood clot after 6 months (p > 0.05). Considering the type of intracanal coronal barrier, no significant difference existed between ProRoot MTA and Biodentine (p > 0.05). Conclusions: With sealing the dentinal tubules of pulp chamber with a dentin bonding agent and application of DAP as an intracanal medicament, coronal color change of the teeth following the use of PRF and blood sealed with either ProRoot MTA or Biodentine was not different at 6-month follow-up.

• Restorative Dentistry and Endodontics
• /
• 제33권6호
• /
• pp.545-552
• /
• 2008

본 연구의 목적은 NaOCl로 처리된 치수강 상아질에 total-etching adhesive system(single bond, 3M-ESPE, St Paul, MN, USA)을 적용할 때 미세인장결합강도에서 sodium ascorbate가 미치는 영향을 평가하는 것이다. 발치된 건전한 인간 대구치의 치수강 내면을 다음과 같이 처리하였다. 1군, 0.9% NaCl로 세척; 2군, 5.25% NaOCl로 세척; 3군, 5.25% NaOCl로 세척한 후 10% sodium ascorbate를 1분간 적용; 4군, 5.25% NaOCl로 세척한 후 10% sodium ascorbate를 1분간 적용하고 다시 10ml 물로 수세; 5군, 5.25% NaOCl로 세척한 후 10% sodium ascorbate를 5분간 적용; 6군, 5.25% NaOCl로 세척한 후 10% sodium ascorbate를 5분간 적용하고 다시 10ml 물로 수세; 7군, 5.25% NaOCl로 세척한 후 10% sodium ascorbate를 10분간 적용; 8군, 5.25% NaOCl로 세척한 후 10% sodium ascorbate를 10분간 적용하고 다시 10ml 물로 수세. 처리된 시편들은 total-etching adhesive system(Single bond)으로 처리한 후 composite resin(Z250)으로 충전하고, 미세인장강도를 측정하기 전 24시 간 동안 보관하였다. 분석 결과 NaOCl 처리 군(2군)은 다른 실험군들에 비해 유의성 있게 낮은 결합 강도를 보였다. NaCl 처리 군(1군)과 sodium ascorbate 처리 군(3-8군)은 유의성 있는 차이가 없었다. 이번 연구 결과는 NaOCl로 처리한 치수강 상아질의 Single bond에 대한 미세인장결합강도는 감소되며, 10% sodium ascorbate를 추가적으로 처리하였을 때 감소된 결합력이 회복됨을 보여주었다. Sodium ascorbate의 다양한 처리시간은 결합력에 영향을 미치지 않았다.

• Restorative Dentistry and Endodontics
• /
• 제2권1호
• /
• pp.38-49
• /
• 1976

Central and lateral incisors of 20, 40 and 60 age groups were bisected pararelly to long axis and middle portion of mesio-distal of teeth. And author measured the hardness of various areas in enamel and dentin with vickers hardness tester. Measured levels were divided into the labio-middle portion, middle portion of incisal edge and linguo-middle portion in enamel and dentin of all age groups. The results were as follows; 1) Total average hardness of enamel for 20, 40 and 60 age groups were respectively Hv. 366.5${\pm}$5.75, Hv. 372.9${\pm}$8.16 and Hv. 389.8${\pm}$10.27. 2) Total average hardness of dentin for 20, 40 and 60 age groups were respectively Hv. 51.0${\pm}$2.14, Hv. 54.0${\pm}$1.87 and Hv. 55.3${\pm}$2.23. 3) Total microhardness values in enamel and dentin of 60 age group was highered than 20 and 40 age groups. 4) The hardness values of enamel and dentin in all age groups were detected lower value on the middle portion of incisal edge than the labio-middle portion and linguo-middle portion. 5) Microhardness values of enamel was highered gradually from the dentinoenamel junction to the outer surface and it lowered at the outermost surface in all age groups. The microhardness values of dentin were the highest values at 600${\mu}$ from dentino-enamel junction and the lowest values at near the pulp chamber in all age groups.

• 대한소아치과학회지
• /
• 제31권1호
• /
• pp.85-91
• /
• 2004

연구목적은 복합레진 중합 광원에 따른 치수강 온도 변화를 관찰하는 것이었다. 연구에 사용된 광중합기는 일반 플라즈마아크 광중합기, 저발열 플라즈마 아크 광중합기, 저출력 할로겐 광중합기, 저출력 LED 광중합기, 고출력 LED 광중합기의 다섯 개이었다. K-type thermocouple 온도계를 사용하여, 중합기 light guide tip에서의 온도를 측정하고, 잔존 상아질 두께가 1mm가 되도록 형성한 유구치 와동에 상아질 접착제만 도포한 군, ionomer glass를 함유한 base 또는 calcium hydroxide를 함유한 base를 0.5mm두께로 이장한 군에서 각각 레진 충전 전과 후의 치수강내 온도를 측정하였다. 중합기 light guide tip에서 측정한 온도는 일반 플라즈마가 $52.94^{\circ}C$로 가장 높았고, 저출력 LED가 $26.14^{\circ}C$로서 가장 낮았다. 레진충전 전의 치수강내 온도는 고출력 LED가 $41.60{\sim}43.34^{\circ}C$로 가장 높았고, 저출력 LED는 $36.50{\sim}36.76^{\circ}C$로서 가장 낮았다. 레진 충전 후의 치수강내 온도는 고출력 LED가 $40.22{\sim}40.94^{\circ}C$로 가장 높았고, 저발열 플라즈마와 저출력 LED는 온도 상승이 없었다. Base의 사용은 부분적인 열 차단 효과가 있었다.

• Restorative Dentistry and Endodontics
• /
• 제38권4호
• /
• pp.258-262
• /
• 2013

The restorative management of deep carious lesions and the preservation of pulp vitality of immature teeth present real challenges for dental practitioners. New tricalcium silicate cements are of interest in the treatment of such cases. This case describes the immediate management and the follow-up of an extensive carious lesion on an immature second right mandibular premolar. Following anesthesia and rubber dam isolation, the carious lesion was removed and a partial pulpotomy was performed. After obtaining hemostasis, the exposed pulp was covered with a tricalcium silicate cement (Biodentine, Septodont) and a glass ionomer cement (Fuji IX extra, GC Corp.) restoration was placed over the tricalcium silicate cement. A review appointment was arranged after seven days, where the tooth was asymptomatic with the patient reporting no pain during the intervening period. At both 3 and 6 mon follow up, it was noted that the tooth was vital, with normal responses to thermal tests. Radiographic examination of the tooth indicated dentin-bridge formation in the pulp chamber and the continuous root formation. This case report demonstrates a fast tissue response both at the pulpal and root dentin level. The use of tricalcium silicate cement should be considered as a conservative intervention in the treatment of symptomatic immature teeth.

• Restorative Dentistry and Endodontics
• /
• 제32권3호
• /
• pp.198-207
• /
• 2007

본 연구는 다양한 접착 과정과 기전을 지닌 4종의 상아질 접착제를 이용하여 수산화칼슘의 사용 여부 및 그 적용 기간이 접착강도에 미치는 영향을 측정 및 평가하고 주사전자현미경을 이용한 접착 계면의 관찰을 통해 복합레진 수복이나 레진 시멘트를 이용한 수복물 접착 시에 적절한 상아질 접착제의 선택과 사용방법을 알아보고자 시행하였다. 치수강에 근접한 상아질 표면을 노출시킨 후, $Ca(OH)_2$를 생리식염수와 혼합하여 실험군 치아 24개의 상아질 표면에 적용한 후, IRM (Intermediate Restorative Material, Dentsply Caulk, Milford, USA)으로 적용된 수산화칼슘 및 변연 부위의 상아질과 법랑질 모두를 밀폐하여 $36.5^{\circ}C$ 증류수에서 실험기간 (7일 및 30일) 동안 보관하였다. Scotchbond Multipurpose, Single Bond, SE Bond and Prompt L-Pop 등 4종의 상아질 접착제를 제조사의 지시에 따라 적용하고 복합 레진을 3회에 나누어 총 5 mm 높이로 적층한 뒤 각 층마다 20초씩 광조사를 시행하였다. Universal testing machine을 이용하여 1mm/min의 crosshead speed로 하중을 가하여 미세인장 접착 강도를 측정하고 파단면을 주사전자현미경으로 관찰하였다. 이상의 연구 결과에서 단기간 (7일 또는 30일간)의 수산화칼슘 적용은 상아질 접착제의 접착 과정의 차이에 따른 변화를 나타내지 않는 것으로 평가되었다.