• 한국연초학회지
• /
• 제21권2호
• /
• pp.144-151
• /
• 1999

This study was carried out to compare the change physico-chemical properties in the 10 grades of Burley leaf tobacco expanded by $CO_2$. The filling capacity of AB3T was increased from 5.44cc/g to 9.52cc/g with the expansion rate 75.0% and that of CD3W was increased from 5.57cc/g to 10.16cc/g with the expansion rate 82.4%. But the rate of cut tobacco longer than 3.36 mm decreased from 77.2% to 49.9% and from 67.3% to 41.2% in grade B1T and C1W, respectively. The contents of nicotine and total volatile base in the of expanded cut tobacco decreased 11.9% and 10.4% respectively. The contents of onganic acids, except oxalic and palmitic acid, essential oil, amino acids, nicotine, tar and ammonia contents in the cigarette smoke decreased by expansion procecs. These results suggest that expanded tobacco was very useful to make less irritative cigarettes.

• 한국세라믹학회지
• /
• 제34권8호
• /
• pp.817-824
• /
• 1997

Stabilization is a key stage in the production of advanced carbon/carbon composites (ACC) from mesophase pitch, to render the mesophase infusible and the prevention of puffing during the subsequent carbonization. It is generally known that stabilization process as well as properties of mesophase pitch has a great deal of influence on the properties of the resultant ACC. Hence, it is possible to infer the properties of ACC by examing the stabilized mesophase pitch. In this study, extractions by solvents or acidified solvents extraction were carried out from the A-240 petroleum pitch. The extracted pitches were made into mesophase by heat treatments. Oxidative stabilization by air and non-oxidative stabilization by a chemical free radical initiator were performed. When a soluble polymer is fully stabilized, it should become insoluble in solvents. This phenomenon was used to estimated the degree of stabilization. The non-oxygen stabilized mesophase pitch powder was compared with the air stabilized mesophase pitch powder. FTIR provided additional information on the functional groups.

• 한국자동차공학회논문집
• /
• 제15권1호
• /
• pp.49-55
• /
• 2007

The characteristics of auto-ignition and combustion process of a single droplet of emulsified fuel suspended in a high-temperature air chamber have been investigated experimentally with various droplet sizes, surrounding temperatures, and water contents. The used fuels was n-Decane and it was emulsified with varied water contents whose maximum is 30%. The high-speed camera has been adopted to measure the ignition delay and flame life time. It was also applied to observe micro-explosion behaviors. The increase of droplet size and chamber temperature cause the decrease of the ignition delay time and flame life-time. As the water contents increases, the ignition delay time increases and the micro-explosion behaviors are strengthened. The starting timings of micro-explosion and fuel puffing are compared for different droplet sizes and the amount of water contents.

• 복식
• /
• 제42권
• /
• pp.69-90
• /
• 1999

Mannerism style evolved from the Renaissance style adopting the concept of grace as the ideal beauty, Having its ground on Neoplatonism the main goal of mannerism art was the realization of the invisible beauty over reality. Mannerism style in dress flourished in the sixteenth century court society, when courtly manners and courtly grace became the most important qualities in social relationship. Courtiers thought that courtly grace the ideal of beauty could be realized in the cultured and studied elegance. Mannerism style in dress evolved from the process of transforming and manipulating the Renaissance look for the abstract of beauty. The clothes of Mannerism style were against the natural movement of the human body. There was a tendency of refining and polishing the whole clothing and various technical skills were experim-ented on the mannerism style. The outstanding elements of this tendency can be found in the details like ruffs fathingale padding slashing puffing and etc. Mannerism intended to reconstruct the human body artificially to express courtly grace and novelty. During that process the new pose 'figura serpentinata' which is bizarre convoluted pose with full of flexibility was created. The expression of human body became more slender with elongated legs a torso with a long neck and a tiny head. This tendency of distorting the natural body forms were reflected in the formal characteristics of Mannerism dress style which is geometrical abstr-action unnatural elongation complex disposition and control with perfect ease.

• 대한한의학회지
• /
• 제33권3호
• /
• pp.200-230
• /
• 2012

Objectives: Ginseng, Panax ginseng C. A., white ginseng, has been used for thousands of years in Traditional Korean Medicine. Red ginseng can be made by a steaming process of white ginseng changing a variety of ginsenosides and ingredients such as dencichine. This article reviews red ginseng for mechanisms for pharmacodynamics and toxicity based on the content of ginseng's active ingredients, ginsenoside changed by steaming. Methods: The following electronic databases were searched: PubMed, Science Direct and Chinese Scientific Journals full text database (CQVIP), and KSI (Korean Studies Information) from their respective inceptions to June 2012. Results: Compared with unsteamed ginseng, the content of ginsenosides Rg2, Rg3, Rg5, Rh1, Rh2 and Rk1 called red ginseng-specific ginsenosides increased after the steaming process. Different ginsenosides have shown a wide variety of effects such as lowering or raising blood sugar and blood pressure or stimulating or sedating the nervous system. Especially, the levels of Rg2, Rg3, Rg5, Rh1, Rh2 and Rk1 were increased by the steaming process, showing a variety of pharmacodynamics in biological systems. Also, various processing methods such as puffing and fermentation have been developed in processing crude ginseng or red ginseng, affecting the content of ginseng's ingredients. The safety issue could be the most critical, specifically, on changed ginseng's ingredients such as dencichine. The level of dencichine was significantly reduced in red ginseng by the steaming process. In addition, the possible toxicity for red ginseng was affected by cytochrome P450, a herbal-drug interaction. Conclusions: The variety of pharmacological and toxicological properties should be changed by steaming process of Panax ginseng C. A., white ginseng. Even if it is not sure whether the steaming process of white ginseng would be better pharmacologically, it is sure that steaming reduces the level of dencichine causing a lower toxicity to the nervous system.

• 한국연초학회지
• /
• 제22권2호
• /
• pp.143-150
• /
• 2000

This study was carried out to investigate the effect of storage period on the physico-chemical properties of tobacco leaves expanded by $CO_2$. The flue-cured and burley tobacco leaves produced from 1996 to 1999 were processed, and stored for that year or 3 years in processing plant. As compared with 1996 crop, the expanded rate of flue-cured tobacco leaves in 1999 crop was higher approximately 18%, while that of burley was higher about 10%. The filling capacity of cigarettes was decreased as storage time became shorter, but the combustibility was improved. The rate of large particles (over 3.36mm) of expanded tobacco showed decreasing tendency as the storage period became longer. The change rate of chemical contents in tobacco leaves between before and after expansion had no significant difference among corp years. The tar and CO contents of cigarettes smoke were reduced in the case of flue-cured tobacco leaves as storage time became shorter, while they were slightly increased in the case of burley tobacco leaves. The ammonia content of burley leaves was decreased remarkably in 1996 and 1999 crop.

• 한국식품조리과학회지
• /
• 제24권3호
• /
• pp.382-391
• /
• 2008

Yukwa samples, made with additions of 0, 10, 20, and 30% Rubus coreanus Miquel extract, were puffed by different puffing methods(convection oven, microwave oven, and fryer) and were then examined for quality characteristics such as moisture content, expansion rate, color, hardness, and sensory qualities, in order to determine the optimal ratio of Rubus coreanus Miquel extract in the formulation and the optimal expansion of Yukwa. The moisture contents of Yukwa base increased as the level of Rubus coreanus Miquel extract increased. And the Yukwa puffed by convection had higher moisture than the samples puffed by microwave oven or frying, with the exception of the sample containing 20% Rubus coreanus Miquel extract. When comparing the expansion rates of samples, no significant differences were found between the control and extract-containing samples puffed by convection, microwave, and frying methods, respectively. However, the sample puffed by frying had the highest expansion rate, whereas the convection-, microwave-puffed samples showed no significant differences. In the convection-, microwave-, and fryer-puffed samples, lightness and yellowness decreased, but redness increased, as the level of Rubus coreanus Miquel extract increased. And the sample puffed by microwave oven had greater lightness as compared to the samples puffed by convection and frying. In terms of hardness, no significant differences were found the control and extract-containing samples puffed by convection and microwave methods. However, hardness was maximal in the sample puffed by convection and lowest in the sample puffed by frying, in which it increased according to the addition of Rubus coreanus Miquel extract. In the consumer acceptance evaluations and characteristics intensity rating tests, the samples puffed using convection and microwave methods showed higher scores for the majority of evaluated characteristics as compared to the samples puffed by frying. And the samples containing Rubus coreanus Miquel extract obtained fairly good scores. In conclusion, the results indicate that additions of 10$\sim$20% Rubus coreanus Miquel extract are optimal for Yukwa that is puffed by convection and microwave methods, as this range provides good physiological properties and reasonably high overall consumer acceptability.

• 한국식품과학회지
• /
• 제27권6호
• /
• pp.1008-1012
• /
• 1995

초미세분쇄한 찹쌀분말을 공기분급휠속도(ACWS, air classifying wheel speed) 20,000 rpm과 15,000 rpm으로 공기분급하였을 경우 ACWS의 증가에 따라 입자의 크기는 감소하였으며, 성분조성중 단백질, 지방, 회분은 증가한 반면 전분질은 감소하였다. 조분획의 전분손상도가 전통적인 침지방법으로 제조된 찹쌀분말의 전분손상도와 비슷하였다. 회수된 각 분획으로 유과를 제조하여 이를 전통적인 방법으로 제조한 유과와 비교한 결과, $15,000{\sim}20,000\;rpm$ 분획과 15,000 rpm 이하의 분획으로 제조한 유과는 전통적인 방법으로 제조한 유과와 팽화율, 경도, 기포수 등의 품질요인에서 유의차가 없었으며 관능검사 결과도 동일하게 나타났다. 따라서 이 분말소재를 이용할 경우 전통적인 유과제조공정중 수침공정을 생략할 수 있었다.

• 한국식품영양과학회지
• /
• 제39권6호
• /
• pp.843-852
• /
• 2010

옥수수를 이용한 고품질의 가공식품을 개발하기 위한 연구의 일환으로 옥수수의 품종별 및 가열처리에 따른 기능성 폴리페놀화합물인 hydroxycinnamic acid derivatives(HADs) 및 안토시아닌 색소의 함량 변화를 조사하였다. 국내산 3가지 옥수수 품종(찰옥수수, 감미옥수수 및 사료용 옥수수)의 일반성분 함량을 측정한 결과, 수분함량은 4.13~10.07%, 무질소화합물 65.57~81.75%, 단백질 6.51~15.15%, 지방 3.16~12.35%, 섬유소 2.09~7.81%, 회분 1.40~1.96% 범위로, 찰옥수수의 일반성분의 함량은 비슷하였으나 감미종 옥수수는 찰옥수수보다 단백질과 지방 함량이 높은 반면, 당 함량은 낮았으며, 특히 감미종 중 감미옥 품종은 지방과 섬유소 함량이 옥수수 품종 중 가장 높은 함량을 나타내었고, 사료용 옥수수는 단백질 및 지방 함량이 매우 낮았으며, 특히 단백질 함량은 옥수수 품종 중 가장 낮았다. 옥수수 품종 중 찰옥수수는 5가지 HADs 함량이 골고루 분포하고 있는 반면, 사료용 옥수수는 2가지 FCAs의 함량은 낮은 반면, 3가지 PCs 함량이 가장 높았으며, 특히 P3394 품종이 가장 높았다. 감미 옥수수는 찰옥수수보다 FCAs의 함량은 대체로 높은 반면, PCs는 사료용보다 적어 대체로 찰옥수수와 사료용 옥수수의 중간 정도의 HADs 함량을 나타내었다. 찰옥수수 품종 중 박사찰옥수수의 총 안토시아닌 색소 함량은 2.03 mg/g(건물중), 알록이찰옥수수는 3.43 mg/g, 그리고 흑찰옥수수의 함량은 4.35 mg/g으로서 흑미백찰옥수수의 총 안토시아닌 색소 함량이 가장 높았다. 가열처리에 따라 흑찰옥수수의 2가지 FCAs는 다소 증가한 반면, 3가지 PCs는 거의 변화가 없었으며, 가열처리 중 볶음, retort 및 팽화처리는 FCAs를 증가시켰고 특히 팽화처리 시 크게 증가하였다. 가열처리에 따른 흑찰옥수수의 총 안토시아닌 색소 함량을 측정한 결과, 대조구 함량은 4.35 mg/g이었으나 retort 처리(4.45 mg/g) 경우를 제외하고 대부분 가열처리에 따라 함량이 감소하는 경향을 나타내었으며, 특히 팽화처리 경우 안토시아닌 함량이 크게 감소하여 거의 소실되었다. 흑미백찰옥수수로부터 주된 안토시아닌 색소인 pelargonidin 3-glucoside(P3G)를 분리 및 동정하였으며, 가열처리에 따른 P3G의 함량 변화를 측정한 결과, retort 처리 경우 함량이 다소 증가한(20.03 mg%) 반면, 그 외 볶음, 마이크로파 및 압출성형 처리에 의해 대체로 감소하였으며, 특히 팽화처리 경우 색소가 거의 소실되었다. 이러한 결과를 종합해 볼 때 옥수수의 기능성성분인 HADs 및 안토시아닌 색소 함량은 옥수수 품종 및 가공처리에 따라 다소 달라짐을 알 수 있었으며, 특히 옥수수 품종 중 항암, 항고혈압, 항당뇨 및 항노화성 FCAs 및 안토시아닌 색소 함량이 높은 흑찰옥수수의 대량 보급과 더불어 고압가열처리(retort)에 의한 고품질의 흑찰옥수수 가공품 개발이 요구된다.

• 한국식품조리과학회지
• /
• 제23권3호통권99호
• /
• pp.369-377
• /
• 2007

The aims of this study were to develop and standardize the manufacturing procedures and ingredient formulation of non-fried, extrusion-puffed Yukwa. The quality and storage stability of the non-fried Yukwa (NF) were characterized and compared against a traditional deep-fried Yukwa (F). The moisture contents of both the NF and F were almost comparable at 5.12${\sim}$6.22% after the final product preparation. The textural hardness values of the NF samples were one-half to two times as hard as those of F, although no clear distinctions were reported between the two products by the sensory evaluation results (p<0.05). During storage, the acid value of F was 1.68 KOH mg/g on day 7, and then it rapidly increased to 5.52 KOH mg/g on day 14. In contrast, the acidity values of NF were 1.21 and 2.62 KOH mg/g on day 7 and 14, respectively. The peroxide values of the samples increased from 23.5 to 62.0 meq/kg (F) and from 2.0 to 2.5 meq/kg (NF) during the two weeks of storage after preparation, suggesting excellent fat stability for the NF product. Regarding the sensory evaluation results of the products, no significant (p<0.05) differences were noted between F and NF with scores of approximately 3.1 out of 5.0 points for the overall quality characteristics of the final products. Accordingly, we conclude that extrusion puffing technology could be adopted as an alternative to conventional deep fat frying as a partial manufacturing process of Yukwa.