• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.4
• /
• pp.57-62
• /
• 2014

Recently, research activities to develop services for providing safety information to the drivers in fast moving vehicles based on various wireless network technologies such as DSRC (Dedicated Short Range Communication), IEEE 802.11p WAVE (Wireless Access for Vehicular Environment) are widely being carried out. This paper presents a proof-of-concept model based on a robot-car for Dilemma Zone Decision Assistant Service using the wireless LAN technology. The proposed model system consists of a robot-car based on an embedded Linux OS equipped with a WiFi interface and an on-board unit emulator, an Android-based remote controller to model a human driver interface, a laptop computer to run a model traffic signal controller and signal lights, and a WiFi access point to model a road-side unit.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.4
• /
• pp.80-95
• /
• 2019

Recently, with the development of sensor and communication technology, researchers at home and abroad have actively conducted research on methodologies for determining maintenance through diagnosis and prediction techniques by collecting information on the status of equipment or systems. Based on the status of vehicle parts at this point in time, this study presented a system framework for making maintenance decisions by predicting the change in vehicle part status to a future date based on the current state of vehicle parts. In addition, condition diagnosis and predictive data adjustment was configured through tracking the status of vehicle parts before and after maintenance activities. We hope that the application of the results of this study will contribute a little to the safety of citizens using public buses and to the activation of the condition-based maintenance system of vehicles.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.266-283
• /
• 2022

With the rapid development of autonomous vehicle technology, unexpected accidents are occurring. Therefore, it is necessary to minimize user accident damage through the development of autonomous traffic safety education. Since edge cases, accident type, and risk factor analysis are important for realistic education, overseas case studies and demonstrations were carried out, and based on this, two curriculum for service providers and general users were developed. The service provider curriculum consisted of OEDR, sudden stop, cut-in, take-over, defensive driving, system malfunction, policy and information security education, and the general user curriculum consisted of attention duty, take-over, operating design domain, accidents type, laws, functions, information security education.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.3
• /
• pp.1-13
• /
• 2020

When pedestrians cross a pedestrian crossing during a pedestrian signal, there is a problem that pedestrians are exposed to the danger of traffic accidents due to permissive-left turning and right-turning vehicles. In order to solve this problem, there is an increasing demand to improve the traffic signal system to increase pedestrian safety at the signal crossing. This study aims to examine the feasibility of introducing a leading pedestrian interval(LPI) to prevent conflict between unprotected left and right turn vehicles and pedestrians. In this study, the need for LPI was surveyed by experts and the general public. As a result of the survey, many opinions indicated that the introduction of LPI was necessary. In addition, after selecting the non-protected left and right turn pilot operation targets, LPI was installed on two signal intersections. After installation, the speed analysis of the arrival vehicle in the pedestrian crossing and the violation rate of the pedestrian signal were analyzed. As a result of analysis, when the walking signal was equalized, the speed of the arriving vehicle in the pedestrian crossing was reduced, and the violation rate of the walking signal was improved.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.4
• /
• pp.63-72
• /
• 2014

With the rapid development in the economy and other fields as well, the standard of living in South Korea has been improved, and consequently, the demand of automobiles has quickly increased. It leads to various traffic issues such as traffic congestion, traffic accident, and parking problem. In particular, this illegal parking caused by the increase in the number of automobiles has been considered one of the main reasons to bring about traffic congestion as intensifying any dispute between neighbors in relation to a parking space, which has been also coming to the fore as a social issue. Therefore, this study looked into Daejeon Metropolitan City, the city that is understood to have the highest automobile sharing rate in South Korea but with relatively few cases of illegal parking crackdowns. In order to investigate the theoretical problems of the illegal parking, this study conducted a decision-making tree model-based Exhaustive CHAID analysis to figure out not only what makes drivers park illegally when they try to park vehicles but also those factors that would tempt the drivers into the illegal parking. The study, then, comes up with solutions to the problem. According to the analysis, in terms of the influential factors that encourage the drivers to park at some illegal areas, it was learned that these factors, the distance, a driver's experience of getting caught, the occupation and the use time in order, have an effect on the drivers' deciding to park illegally. After working on the prediction model, four nodes were finally extracted. Given the analysis result, as a solution to the illegal parking, it is necessary to establish public parking lots additionally and first secure the parking space for the vehicles used for living and working, and to activate the campaign for enhancing illegal parking crackdown and encouraging civic consciousness.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.2
• /
• pp.142-156
• /
• 2024

The transition to electric vehicles is a crucial step toward achieving carbon neutrality in the transportation sector. Adequate charging infrastructure at residential locations is essential. In South Korea, the predominant form of housing is multifamily dwellings, necessitating the provision of public charging stations for numerous residents. Although the government mandates the availability of charging facilities and designated parking areas for electric vehicles, it bases the supply of charging stations solely on the number of parking spaces. Slow chargers, mainly 3.5kW charging outlets and 7kW slow chargers, are commonly used. While the former is advantageous for installation and use, its slower charging speed necessitates the coexistence of both types of chargers. This study presents an optimization model that allocates chargers capable of meeting charging demands based on daily driving distances. Furthermore, using the metaheuristic algorithm Tabu Search, this model satisfies the optimization requirements and minimizes the costs associated with charger supply and usage. To conduct a case study, data from personal travel surveys were used to estimate the driving distances, and a hypothetical charging scenario and environment were set up to determine the optimal supply of 22 units of 3.5kW charging outlets for the charging demands of 100 BEVs.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.4
• /
• pp.53-64
• /
• 2009

Inter-vehicular communication that propagates information without infrastructures has drawn a lot of interest. However, it is difficult to apply conventional ad-hoc routing protocols directly in inter-vehicular communication due to frequent changes in the network topology caused by high mobility of the vehicles. MMFP(Multi-hop MAC Forwarding) is a unicast forwarding protocol that transport packets based on the reachability information instead of path selection or position information. However, delivering public safety messages informing road conditions such as collision, obstacles and fog through inter-vehicular communication requires broadcast rather than unicast since these messages contain information valuable to most drivers within a close proximity. Flooding is one of the simplest methods for multi-hop broadcast, but it suffers from reduced packet delivery-ratio and high transmission delay due to an excessive number of duplicated packets. This paper presents two multi-hop broadcast protocols for inter-vehicular communication that extend the MMFP. UMHB(Unreliable Multi-Hop Broadcast) mitigates the duplicated packets of MMFP by limiting the number of nodes to rebroadcast packets. UMHB, however, still suffers from low delivery ratio. RMHB(Reliable Multi-Hop Broadcast) uses acknowledgement and retransmission in order to improve the reliability of UMHB at the cost of increase in transmission delay, which we show through simulation is within an acceptable range for collision avoidance application.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.5
• /
• pp.1-13
• /
• 2011

Recently, a number of OBU(On Board Unit) have being spreaded since ETCS(Electronic Toll Collection System)using DSRC(Dedicated Short Range Communication) was installed in the tollgate of the whole country. Many R&D and commercialization related to ITS service using DSRC and OBU mentioned above are ongoing such as traffic information collection and provision and a signal control, and public traffic information and management and so on. Especially, there are many researches conducted(conducting) on traffic information collection and provision using communication between OBU and RSE. However, Standards for both DSRC application and traffic collection and provision are not established clearly yet. So we would like to suggest a method of traffic information collection and provision without changing of standard related to DSRC. This method is to put the traffic messages into the existing Action primitive for ETC, which is described on "Technical criterion IV of basic traffic information exchange" which was notified by Ministry of Land, Transport and Maritime Affairs. Proposed standard application method is applied both to RSE and OBE. It is the same system which ETCS used in highway, currently. We confirmed the efficiency and performance of the system through conducting a variety of driving test using 4 vehicles in real road condition. Result of the real road test shows the effectiveness and validity of this method with about 97% communication success rate and based on studying the cases of 3% communication failure, we can analyse the expected problems in traffic information collection and provision using this method.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.8
• /
• pp.77-85
• /
• 2013

In this paper, we proposed the vehicle data format of digital tachograph to improve the vehicle data format of the MOLIT(Ministry of Land, Infrastructure and Transport). The vehicle data collection and analysis is currently available through digital tachograph mandatory installation for commercial vehicles. And public agency is used the vehicle data format as a transmission format defined by MOLIT's guideline for their vehicle data processing. However, Vehicle data format is different for each manufacturer and MOLIT's vehicle data format is also need to advance. We confirmed the proposed the vehicle data format improved based on the vehicle data format of MOLIT through the system implementation and experiment in this paper.

• Safety and Health at Work
• /
• v.7 no.4
• /
• pp.372-380
• /
• 2016

Background: The aim of this study was to estimate the number of workers exposed to diesel engine exhaust (DEE) by industry and year in the Republic of Korea. Method: The estimates of workers potentially exposed to DEE in the Republic of Korea were calculated by industry on the basis of the carcinogen exposure (CAREX) surveillance system. The data on the labor force employed in DEE exposure industries were obtained from the Census on Establishments conducted by the Korea National Statistical Office from 1993 to 2013. The mean values of prevalence rates adopted by EU15 countries were used as the primary exposure prevalence rates. We also investigated the exposure prevalence rates and exposure characteristics of DEE in 359 workplaces representing 11 industries. Results: The total number of workers exposed to DEE were estimated as 270,014 in 1993 and 417,034 in 2013 (2.2% of the total labor force). As of 2013, the industry categorized as "Land transport" showed the highest number of workers exposed to DEE with 174,359, followed by "Personal and household services" with 70,298, "Construction" with 45,555, "Wholesale and retail trade and restaurants and hotels" with 44,005, and "Sanitation and similar services" with 12,584. These five industries, with more than 10,000 workers exposed to DEE, accounted for 83% of the total DEE-exposed workers. Comparing primary prevalence rates used for preliminary estimation among 49 industries, "Metal ore mining" had the highest rate at 52.6%, followed by "Other mining" with 50.0%, and "Land transport" with 23.6%. Conclusion: The DEE prevalence rates we surveyed (1.3-19.8%) were higher than the primary prevalence rates. The most common emission sources of DEE were diesel engine vehicles such as forklifts, trucks, and vans. Our estimated numbers of workers exposed to DEE can be used to identify industries with workers requiring protection from potential exposure to DEE in the Republic of Korea.