• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.47-55
• /
• 2005

Roads deeply affect the life of people and keep doing an important role to support economic growth of a country. According to the budget plan of the ministry of construction and transportation of Korea, 8.1 trillion won have been allotted for road investment in the year of 2002 which occupy 61% of the transportation infrastructure special account (13.3 trillion won) and 4.7% of the total national budget (1,740 trillion won). It is true that services generated from road investment such as mobility enhancement and increased accessibility have shown positive effects through shortened travel time and decreased vehicle operating cost. However, it is also notable that many negative effects are gradually being discussed and those are nowadays getting severer due to enhanced people interests about road construction, increased concerns on environment and active public involvement that were evoked by traffic accidents, air pollution & noise and destruction of environment. Road construction processes in Korea are normally governed by administrative sectors (suppliers) not by users. These processes ate very weak to accomodate user s needs and community concerns thus easy to fail finalizing a road project without hassles. A public hearing process is supposed to be held in the processes of detailed design step and the environmental impact analysis. However, it is not enough to grab user's needs and community concerns. Increased public involvement frequencies, optimized public involvement timing and enhanced depth of public involvement magnitude are suggested to improve the current poor public involvement schemes in road planning and design processes. The application of these recommended methods to the road planning and design processes may guarantee the change from the current supplier-oriented schemes to the new user-oriented one. Also, this study suggests to reset objectivity and clarity of road construction process, to make conciliation guidelines based on many practical cases that produced good results, to introduce public involvement techniques in a stepwise basis, and to foster the professionals via education and training programs.

• STI Policy Review
• /
• v.7 no.1
• /
• pp.87-109
• /
• 2016

Public procurement for innovation (PPI) is a new approach in stimulating innovation, and currently attracts considerable attention from policymakers and academics. This paper discusses the rationales and perspectives of PPI in Vietnam. The rationales for public procurement for innovation policy in Vietnam compared to theoretical and international practice are discussed. From such a comparison, the paper concludes that R&D results-procurement policy in Vietnam shall be understood and implemented as regular PPI both theoretically and practically. However while designing the policy, policymakers must consider the characteristics of the STI system of the country in order to make the policy adaptable to context. The paper identifies that PPI in Vietnam can be implemented with a ready legal framework (intellectual property rights, R&D contracts, standardization, etc.), the prepared capabilities of R&D institutions, businesses, and public agencies in innovation processes, and the provision of a demand-supply network and other procurement incentives.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.927-930
• /
• 2009

We studied the solution processes of IGZO thin films and investigated the electrical characteristics of thin film transistor (TFT) with sol-gel processed InGaZn-oxide active semiconductor layer. In particular, the effect of composition variation and post annealing temperature were studied by using solutions having various metal cation ratios to optimize transistor performance.

• Korean Journal of Computational Design and Engineering
• /
• v.8 no.1
• /
• pp.35-40
• /
• 2003

In this paper, we present the methods to develop a Web-based CAM system that is capable to simulate machining processes in solid model form through internet. The methods include the dynamic representation on Web of machining operation, workpiece definition on the request of users, interpretation technique of NC par programs through CORBA, and algorithm for efficient machining simulation. Based on the methods, a Web-based CAM system it implemented at http://virtual.ulsan.ac.kr. Using the Web-based CAM system, public users tan simulate machining processes by own NC part programs.

• Environmental Analysis Health and Toxicology
• /
• v.10 no.1_2
• /
• pp.21-35
• /
• 1995

Risk assessment processes, which include processes for the estimation of human cancer potency using animal bioassay data and calculation of human exposure, entail uncertainties. In the exposure assessment process, exposure scenarios with various assumptions could affect the exposure amount and excess cancer risk. We compared risk estimates among various exposure scenarios of vinyl chloride, trichloroethylene and tetrachloroethylene in tap water. The contaminant concentrations were analyzed from tap water samples in Seoul from 1993 to 1994. The oral and inhalation cancer potencies of the contaminants were estimated using multistage, Weibull, lognormal, and Mantel-Bryan model in TOX-RISK computer software. In the first case, human excess cancer risk was estimated by the US EPA method used to set the MCL(maximum contaminant level). In the second and third case, the risk was estimated for multi-route exposure with and without adopting Monte-Carlo simulation, respectively. In the second case, exposure input parameters and cancer potencies used probability distributions, and in the third case, those values used point estimates(mean, and maximum or 95% upper-bound value). As a result, while the excess cancer risk estimated by US EPA method considering only direct ingestion tended to be underestimated, the risk which was estimated by considering multi-route exposure without Monte-Carlo simulation and then using the maximum or 95% upper-bound value as input parameters tended to be overestimated. In risk assessment for volatile organic compounds, considering multi-route exposure with adopting Monte-Carlo analysis seems to provide the most reasonable estimations.

• Journal of Preventive Medicine and Public Health
• /
• v.55 no.3
• /
• pp.289-296
• /
• 2022

Objectives: Integrating retail and manufacturing enables limitless potential for food businesses, but also creates challenges for navigating within complex food safety regulations. From public health inspectors' (PHIs) perspective, this study aimed (1) to describe the characteristics of crossover businesses in Louisiana, and (2) to evaluate regulation awareness and food safety education needs for business owners and PHIs who inspect crossover businesses. Methods: A self-administered questionnaire was administered to Louisiana Department of Health PHIs using Qualtrics^®. A descriptive analysis was performed, focusing on the frequency of each item. Results: In total, 1774 retailers were conducting or planned to conduct specialized processes, while 552 food manufacturers were performing or planned to perform retail functions. Reduced oxygen packaging, the use of additives such as vinegar as a method of preservation, and smoking food as a method of preservation were observed by 62%, 36%, and 35% of the PHIs, respectively. The PHIs perceived crossover businesses as "not aware" or "somewhat aware" of the food safety regulations. The current food safety training level for these businesses was reported to range from "no training" to "some training but not sufficient." When asked for a self-assessment, the majority of PHIs reported themselves as being "familiar" with the variance requirement for specialized processing. Their confidence in inspecting crossover businesses, however, leaned towards "not confident" or "somewhat confident." Conclusions: To better guard public health, food safety training is needed for crossover food business owners, as well as PHIs, on regulations and conducting or inspecting specialized processes.

• Land and Housing Review
• /
• v.9 no.2
• /
• pp.21-31
• /
• 2018

The purpose of this study is to introduce the design and early implementation results of Choice Neighborhoods(Choice) initiative, which is the most recent version of public housing policies in the United States designed and implemented under the Obama administration. The Choice initiative aims to support a wide range of strategies locally driven to address problems in disadvantaged neighborhoods with an emphasis on a comprehensive approach to transforming those neighborhoods. In this study, first, I briefly review the history of public housing policies since 1937, particularly focusing on limitations of HOPE VI(Housing Opportunity for People Everywhere) projects to understand the context behind the advent of the program. Second, I introduce the overall design of the Choice program and point out how this programs' design differs from previous public housing programs by reviewing the literature on federal guidelines for the Choice program. This study particularly focuses on introducing social services given to existing residents in public housing and their neighborhoods in redevelopment processes. These social services are intended to address poverty-related problems that public housing residents often confront, to help them break out of the cycle of poverty, and to minimize the negative impacts of relocation triggered by redevelopment. Third, to examine how this program has been implemented and has revealed limitations so far, I review an interim evaluation report based on five cities. This study ends with discussing policy implications for public housing providers and housing policy-makers in South Korea.

• 한국디지털정책학회:학술대회논문집
• /
• 2007.06a
• /
• pp.15-22
• /
• 2007

The Korea Post has become the first government management entity to introduce Six Sigma Management Innovation Movement, a private-sector management technique in August 2003, and has since then successfully improved the quality of postal services including efficiency through enhanced business processes and public services. In 2006, The Korea Post expanded the Six Sigma down to six subordinate organizations including the KOVIX, pursuing the innovation of the entire organization from the regional off ice to each post offices.

• Journal of Preventive Medicine and Public Health
• /
• v.47 no.6
• /
• pp.298-308
• /
• 2014

Objectives: To assess the current public participation in-local health policy and its implications through the analysis of policy networks in health center programs. Methods: We examined the decision-making process in sub-health center installations and the implementation process in metabolic syndrome management program cases in two districts ('gu's) of Seoul. Participants of the policy network were selected by the snowballing method and completed self-administered questionnaires. Actors, the interactions among actors, and the characteristics of the network were analyzed by Netminer. Results: The results showed that the public is not yet actively participating in the local public health policy processes of decision-making and implementation. In the decision-making process, most of the network actors were in the public sector, while the private sector was a minor actor and participated in only a limited number of issues after the major decisions were made. In the implementation process, the program was led by the health center, while other actors participated passively. Conclusions: Public participation in Korean public health policy is not yet well activated. Preliminary discussions with various stakeholders, including civil society, are needed before making important local public health policy decisions. In addition, efforts to include local institutions and residents in the implementation process with the public officials are necessary to improve the situation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.12
• /
• pp.1775-1779
• /
• 2012

The aim of the present work was to investigate how colour changes of foal meat can vary after thawing out in relation to the slaughtering age of the horses and to the post-thawing time. Eighteen Italian Heavy Draught Horse (IHDH) foals were used for the trial. They were subdivided in three groups according to their slaughtering age (6, 11 and 18 months). Two different surfaces were investigated for each sample: a fresh cut surface (daily renewed cutting surface: DRCS), and not-renewed cutting surface (NRCS). The redness of both investigated surfaces increased with slaughtering age (p<0.01). Moreover, this parameter decreased during post-thawing time (p<0.01) only on the NRCS, probably due to the myoglobin oxidation processes. Colour is an important visual cue denoting perceived quality by consumers. So, by a chromatic perspective the thawed meat of IHDH foals slaughtered at 6 and 11 months proved to be that which best meets the market requirements.