• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.544-556
• /
• 1991

The optimization of many engineering design problems requires a nonlinear programming algorithm that is robust and efficient. A general-purpose nonlinear optimization program IDOL (Interactive Design Optimization Library) is developed based on the Augmented Lagrange Mulitiplier (ALM) method. The ideas of selecting a good initial design point, using resonable initial values for Lagrange multipliers, constraints scaling, descent vector restarting, and dynamic stopping criterion are employed for computational enhancement to the ALM method. A descent vector is determined by using the Broydon-Fletcher-Goldfarb-Shanno (BFGS) method. For line search, the Incremental-Search method is first used to find bounds on the solution, then the bounds are reduced by the Golden Section method, and finally a cubic polynomial approximation technique is applied to locate the next design point. Seven typical test problems are solved to show IDOL efficient and robust.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.08a
• /
• pp.250-253
• /
• 1998

In digital communicatioin networks, speech recognition systems conventionally reconstruct speech followed by extracting feature [parameters. In this paper, we consider a useful approach by incorporating speech coding parameters into the speech recognizer. Most speech coders employed in the networks represent line spectral pairs as spectral parameters. In order to improve the recognition performance of the LSP-based speech recognizer, we introduce two different ways: one is to devise weighed distance measures of LSPs and the other is to transform LSPs into a new feature set, named a pseudo-cepstrum. Experiments on speaker-independent connected-digit recognition showed that the weighted distance measures significantly improved the recognition accuracy than the unweighted one of LSPs. Especially we could obtain more improved performance by using PCEP. Compared to the conventional methods employing mel-frequency cepstral coefficients, the proposed methods achieved higher performance in recognition accuracies.

• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.319-322
• /
• 2002

In this paper, we present a digital authentication technique using content-based watermarking in digital images. To digest the image contents, Hopfield network is employed on the block-based edge image. The Hopfield function extracts the same tit fur similarly looking blocks so that the values are unlikely to change to the innocuous manipulations while being changed far malicious manipulations. By inputting the extracted bit sequence with secret key to the cryptographic hash function, we generate a watermark for each block by seeding a pseudo random number generator with a hash output Therefore, the proposed authentication technique can distinguish between malicious attacks and innocuous attacks. Watermark embedding is based on the block-based spread spectrum method in DCT domain and the strength of watermark is adjusted according to the local statistics of DCT coefficients in a zig-zag scan line in AC subband. The numerical experiments show that the proposed technique is very efficient in the performance of robust authentication.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.6
• /
• pp.729-743
• /
• 1989

A spread spectrum(ss) communication system has a lot of advantage, such as realzation of asynchronous code division multiplexing(CDM), robutness to narrow-band interference, impulse noise, privacy function, and so on. We have considered utilization of these advantage to develop a local area network(LAN) using such a transmission channel as power-line. In a power-line, however, restricted bandwidth under the law makes it difficult to carry out CDM, and in a radio channel the sysstem has a near-far problem. These problems originate in co-channel interference, which is due to cross-correlation among pseudo-noise sequences of every channel in CDM. In this paper, we propose a new scheme of easily cancelling co-channel interference and investigate its performance by constructing a LAN using SS technique.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.157-162
• /
• 2010

The cart-pole balancing problem is a pseudo-standard benchmark problem from the field of control methods including genetic algorithms, artificial neural networks, and reinforcement learning. In this paper, we propose a novel approach by using online reinforcement learning(OREL) to solve this cart-pole balancing problem. The objective is to analyze the learning method of the OREL learning system in the cart-pole balancing problem. Through experiment, we can see that approximate faster the optimal value-function than Q-learning.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.04a
• /
• pp.57-62
• /
• 2000

This paper describes the need for a ductile Fiber Reinforced Plastic(FRP) reinforcement for concrete structures. Using the material hybrid and geometric hybrid. it is demonstrated that the pseudo-ductility characteristic can be generated in FRP rebar. Ductile hybrid FRP bars were successfully fabricated at 4mm and 10mm nominal diameters using an hand lay up method. Tensile specimens from these bars were tested and compared with behavior of FRP rebar and steel bar

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.53-56
• /
• 2001

With the ever increasing clock frequency and integration level of CMOS circuits, I/O(input/output) and interconnect issues are becoming a growing concern. In this thesis, we propose the 2.5Gbps high speed input driver This driver consists of four different blocks, which are the high speed serializer , PECL(pseudo emitter coupled logic) Line Driver, PLL(phase lock loop) and pre-emphasis signal generator. The proposed pre-emphasis block will compensate the high frequency components of the 2.5Gbps data signal. Using the pre-emphasis block, we can obtain 2.5Gbps data signal with differential peak to peak voltage about 900 m $V_{p.p}$ This driver structure is on fabrication in 2.5v/10.25um 1poly, 5metal CMOS process.

• Clean Technology
• /
• v.17 no.4
• /
• pp.346-352
• /
• 2011

The adsorption characteristics of propineb pesticide onto activated carbon has been investigated for the adsorption in aqueous solution with respect to initial concentration, contact time and temperature in batch experiment. The Langmuir and Freundlich adsorption models were applied to described the equilibrium isotherms and isotherm constants were also determined. The Freundlich model agrees with experimental data well. slope of isotherm line indicate that activated carbon could be employed as effective treatment for removal of propineb. The pseudo first order, pseudo second order kinetic models were use to describe the kinetic data and rate constants were evaluated. The adsorption process followed a pseudo second order model, and the adsorption rate constant($k_2$) decreased with increasing initial concentration of propineb. The activation energy, change of free energy, enthalpy, and entropy were also calculated to predict the nature adsorption. The estimated values for change of free energy were -7.28, -8.27 and -11.66 kJ/mol over activated carbon at 298, 308 and 318 K, respectively. The results indicated toward a spontaneous process. The positive value for change of enthalpy, 54.46 kJ/mol, found that the adsorption of propineb on activated carbon is an endothermic process.

• Journal of Korean Society of societal Security
• /
• v.1 no.3
• /
• pp.77-81
• /
• 2008

In this paper, we introduce a multi purpose environmental monitoring system developed as a commercially available standard using the technique of hetero-core spliced fiber optic sensor. The monitoring system has been tested and evaluated in a possible outdoor condition in view of the full scaled operation at actual sites to be monitored. Additionally, the developed system in this work conveniently provides us with various options of sensor modules intended for monitoring such physical quantities as displacement, distortion, pressure, binary states, and liquid adhesion. Two channels of optical fiber line were monitored, in each of which three displacement sensor modules were connected in series, in order to examine the performance to a pseudo-cracking experiment in the outdoor situation, and to clarify temperature influences to the system in terms of the coupling of optical connectors and the OTDR stability. The pseudo-cracking experiment successfully observed the actually given cracks by means of calculation based on the detected displacement values and their geometrical arrangement of the used sensor modules. And the robustness to the temperature is verified in the various temperature change.

• Tribology and Lubricants
• /
• v.38 no.3
• /
• pp.73-83
• /
• 2022

This paper is concerned with an analysis of a surface edge crack emanated from a sharp contact edge. For a geometrical model, a square wedge is in contact with a half plane whose materials are identical, and a surface perpendicular crack initiated from the contact edge exists in the half plane. To analyze this crack problem, it is necessary to evaluate the stress field on the crack line which are induced by the contact tractions and pseudo-dislocations that simulate the crack, using the Bueckner principle. In this Part I, the stress filed in the half plane due to the contact is re-summarized using an asymptotic analysis method, which has been published before by the author. Further focus is given to the stress field in the half plane due to a pseudo-edge dislocation, which will provide a stress solution due to a crack (i.e. a continuous distribution of edge dislocations) later, using the Burgers vector. Essential result of the present work is the corrective functions which modify the stress field of an infinite domain to apply for the present one which has free surfaces, and thus the infiniteness is no longer preserved. Numerical methods and coordinate normalization are used, which was developed for an edge crack problem, using the Gauss-Jacobi integration formula. The convergence of the corrective functions are investigated here. Features of the corrective functions and their application to a crack problem will be given in Part II.