• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.885-890
• /
• 2002

Pseudo dynamic test is an on-line computer control method to achieve the realism of shaking table test with the economy and versatility of the conventional quasi-static approach. Pseudo dynamic tests of four full-size RC bridge piers have been carried out to investigate their seismic performance. For the purpose of precise evaluation, the experimental investigation was conducted to study the seismic performance of the real size specimen, which is constructed for highway bridge piers in Korean peninsula. Since it is believed that Korea belongs to the moderate seismicity region, three test specimens were designed in accordance with limited ductility design concept. Another one test specimen was nonseismically designed according to a conventional code. Important test parameters were transverse reinforcement and lap splicing. Lap splicing was frequently used in the plastic hinge region of many bridge columns. Furthermore, the seismic design code is not present about lap splice in Korean Roadway Bridge Design Code. The results show that specimens designed according to the limited ductility design concept exhibit higher seismic resistance. Specimens with longitudinal steel lap splice in the plastic hinge region appeared to significantly fail at low ductility level.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.1077-1083
• /
• 2000

With rising demand of Internet Service, the existing communication for users (aced the restricted capability and speed, and also failed to satisfy consumer's desire for providing service-quality to them. It can be accomplished the broad-band on subscribe-line to offer various multimedia service to subscriber. But it takes a lot of times and costs. Consequently, it stands out the most economic subscribe-line for acheving a broadband scheme that new transmission technology can be realized the high-speed data communication as the present telephone-line and telephone by the general public of FTTH(Fiber To The Home). As using the pseudo line, this paper have the result that the mesured speed was improved by connecting a variable resistor on the line.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.125-130
• /
• 1991

This paper presents a tracking filter using pseudomeasurements in an estimated line-of-sight Cartesian coordinate system(ELCCS) whose x-axis is on the line-of-sight to an estimated target position. A target dynamics model and a measurement equation in the ELCCS are derived first and then a tracking filter in the ELCCS named moving coordinate tracking filter(MCTF) is proposed. It is shown that this MCTF is equivalent to a Kalman filter in the inertial Cartesian coordinate system which is widely used in the target tracking system. By approximating the MCTF for a pseudomeasurement noise and an error covariance matrix in the ELCCS, decoupling of three axes can be achieved. In this case, named decoupled moving coordinate tracking filter(DMCTF), computation time can be drastically reduced by utilizing its parallel structure. Finally, the stochastic properties of the MCTF and DMCTF are presented. Especially, a sufficient condition of nondestabilizing deviation for the DMCTF is proposed. The performance of the MCTF and DMCTF are compared with a conventional Kalman tracking filter.

• The Journal of Information Technology
• /
• v.6 no.4
• /
• pp.81-91
• /
• 2003

This paper is concerned with the implementation of power line communication system with 9.6Kbps. This system is suitable to establish the smart home using the power line having been installed in house. In the suggested power line communication system, we use the chirp signal with a linearity and spread spectrum frequency band of 100KHz~200KHz. We had the performance experiment for the implementation system. The experiment was achieved in the pseudo load network similar to real circumstance of power line communication. As the result, the communications under the circumstance were accomplished satisfactorily. We confirmed that the suggested 9.6Kbps power line communication system with the Chirped-SS method had the performance enough to commercialize the smart home.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.3
• /
• pp.16-23
• /
• 2001

In this paper, we propose the pseudo n-gram language models for speech recognition with middle size vocabulary compared to large vocabulary speech recognition using the statistical n-gram language models. The proposed method is that it is very simple method, which has the standard structure of ARPA and set the word probability arbitrary. The first, the 1-gram sets the word occurrence probability 1 (log likelihood is 0.0). The second, the 2-gram also sets the word occurrence probability 1, which can only connect the word start symbol and WORD, WORD and the word end symbol . Finally, the 3-gram also sets the ward occurrence probability 1, which can only connect the word start symbol , WORD and the word end symbol . To verify the effectiveness of the proposed method, the word recognition experiments are carried out. The preliminary experimental results (off-line) show that the word accuracy has average 97.7% for 452 words uttered by 3 male speakers. The on-line word recognition results show that the word accuracy has average 92.5% for 20 words uttered by 20 male speakers about stock name of 1,500 words. Through experiments, we have verified the effectiveness of the pseudo n-gram language modes for speech recognition.

• Earthquakes and Structures
• /
• v.8 no.1
• /
• pp.19-35
• /
• 2015

This study compares the seismic performances of two reinforced concrete frame specimens tested by the pseudo-dynamic procedure. The pair of 3-storey, 3-bay frames specimens are constructed with typical characteristics of older construction which is lacking seismic design. One of the specimens is a bare frame while the other is infilled with low-strength autoclave aerated concrete (AAC) block masonry. The focus of this study is to investigate the influence of low strength masonry infill walls on the seismic response of older RC frames designed for gravity loads. It is found that the presence of weak infill walls considerably reduce deformations and damage in the upper stories while their influence at the critical ground story is not all that positive. Infill walls tend to localize damage at the critical story due to a peculiar frame-infill interaction, and impose larger internal force and deformation demands on the columns and beams bounding the infills. Therefore the general belief in earthquake engineering that infills develop a second line of defence against lateral forces in seismically deficient frames is nullified in case of low-strength infill walls in the presented experimental research.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3E
• /
• pp.105-111
• /
• 2002

The parabolic equation technique provides an excellent model to describe the wave phenomena when there exists a predominant direction of propagation. The model handles the square root wave number operator in paraxial direction. Realization of the pseudo-differential square root operator is the essential part of the parabolic equation method for its numerical accuracy. The wide-angled approximation of the operator is made based on the Pade series expansion, where the branch line rotation scheme can be combined with the original Pade approximation to stabilize its computational performance for complex modes. The Galerkin integration has been employed to discretize the depth-dependent operator. The benchmark tests involving the half-infinite space, the range independent and dependent environment will validate the implemented numerical model.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.4
• /
• pp.467-473
• /
• 1999

We have realized the two kinds of power line communication systems by the FSK MODEM. The first approach is the DS-SS (Direct suquence-spread spectrum) technique using 8 bits pseudo noise, the other is Convolutional coding method by the new algorithm. Their characteristics are comparied with each other by experimenting their Bit Error Rates (BER) in high level of Noise. The results have showed that two systems are useful to the application of HA (Home Automation) systems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.2
• /
• pp.281-287
• /
• 1997

In the conventional inverse modeling method for on-line modeling of the secondary path transfer function, the signal to noise ratio between the arbitrary random signal and the plant noise have to keep at -10 - -20 dB. For these reasons, the modeling can't be exactly implemented by the conventional method alone and the convergence time for modeling becomes too long. In this study, by combining the conventional inverse modeling method with an adaptive line enhancer, or with an adaptive noise canceller, a rigorous transfer functions of secondary path modeling and the control of a primary noise have been implemented simultaneously.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2203-2208
• /
• 2014

The Hough transform (HT), that is a typical algorithm for detecting lines in images, needs considerable computational costs and easily detects pseudo-lines on the real world images, because of the large amount of features generated by their complex background or noise. This paper proposes an improved HT that add a preprocessing to estimate the validity of features to the conventional HT. The feature estimation can remove a lot of inessential features for the line detection using a pattern of $3{\times}3$ block features. Experiments using various images show that the proposed algorithm saves computational costs by removing 14%~58% of features depending on images and besides it is superior to the conventional HT in valid line detection.