• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.762-765
• /
• 2005

본 연구에서는 유도 진동기의 파워 스펙트럼의 확산을 위한 LF2470 DSP기반 Hybrid Random PWM을 제안하였다. 제안된 방법은 Lead-Lag 랜덤 비트를 발생하기 위한 PRBS (Pseudo-Random Binary Sequence)와 PRBS와 논리적 비교를 위한 삼각파 랜덤 캐리어로 이루어진다. 또한 DSP에 의하여 랜덤 수 및 PRBS 그리고 3상 기준 정현파를 실시간으로 발생하며, DSP외부의 주파수 변조기 MAX038에 의하여 랜덤 주파수의 캐리어를 발생한다. 본 연구의 타당성 검증을 위하여 제안된 기법을 3상 유도전동기 구동장치에 적용하였으며, 종전의 방법과 전압 및 전류 그리고 전동기 소음 스펙트럼을 비교 검토하였다.

• 전기의세계
• /
• 제20권3호
• /
• pp.8-16
• /
• 1971

The proper design of man-machine systems requires as much understanding of the human element as of the machine. Although the modern systems engineer can obtain a very high degree of repeatability and accuracy for the characteristics of a machine, these of the human elements are much less well known. Due to the complexity and importance of modern man-machine systems, this difficult problem has recently received increasing attention. In this paper, the dynamic characteristics of the human operator have been newly determined by impulse estimation using Pseuo-random binnary signals as a test signal and the quasi-linear human operator models used as an element of a closed-loop control system adopted from McRuer & Krendel and Bekey. Also the techniques and instruments are presented for correlating the actual characteristics of the constructed system with anticipated theoretical values. Consequently, in spite of many problems remain yet, experimental results were very satisfactory.

• 대한산업공학회지
• /
• 제29권4호
• /
• pp.304-311
• /
• 2003

This paper considers a new variation of scheduling problems where jobs are dispatched in batches. The variation is the case where the batch sequence is fixed. The objective is to minimize the sum of the completion times of the batches. This simple environment has a variety of real world applications such as part kitting and customer order scheduling. We show that this problem is binary NP-complete when there exist two machines. For the same problem, we develop an optimal dynamic programming (DP) algorithm which runs in pseudo-polynomial time. We finally prove the optimality of the DP algorithm.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.75-76
• /
• 2006

New PM route via bulk mechanical alloying is developed to fabricate the solid solution semi-conductive materials with $Mg_2Si_{1-x}Ge_x$ and $Mg_2Si_{1-y}Sn_y$ for 0 < x, y < 1 and to investigate their thermoelectric materials. Since $Mg_2Si$ is n-type and both $Mg_2Ge$ and $Mg_2Sn$ are p-type, pn-transition takes place at the specified range of germanium content, x, and tin content, y. Through optimization of chemical composition, solid-solution type thermoelectric semi-conductive materials are designed both for n-and p-type materials.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1999년도 KOBA 방송기술 워크샵 KOBA Broadcasting Technology Workshop
• /
• pp.35.2-42
• /
• 1999

When we see a binary black and white image, it appears. to our visual sense, to become clearer because of a pseudo halftone. This is because when we don't notice of all the details of the image, instead we see from a more global standpoint. We presented a theory and experimental results for layered model which extended external world, retina and brain of the two dimensional visual model. This paper propose the objective evaluation to coincide with the subjective evaluation of the human in ordered to evaluate the relative merits of the various modulation method. We obtain experimentally the restored images and the measure of approximation of the density four division and ordered dither method. The measure of approximation present s the objective evaluation scale to coincide with the subjective evaluation of the two modulation images.

• Current Optics and Photonics
• /
• 제6권3호
• /
• pp.288-296
• /
• 2022

We propose and experimentally demonstrate a novel photonic compressive sensing (CS) scheme for acquiring sparse radio frequency signals with adjustable compression ratio in this paper. The sparse signal to be measured and a pseudo-random binary sequence are modulated on consecutively connected chirped pulses. The modulated pulses are compressed into short pulses after propagating through a dispersive element. A programmable optical filter based on spatial light modulator is used to realize spectral segmentation and demultiplexing. After spectral segmentation, the compressed pulses are transformed into several sub-pulses and each of them corresponds to a measurement in CS. The major advantage of the proposed scheme lies in its adjustable compression ratio, which enables the system adaptive to the sparse signals with variable sparsity levels and bandwidths. Experimental demonstration and further simulation results are presented to verify the feasibility and potential of the approach.

• 대한전자공학회논문지SD
• /
• 제45권4호
• /
• pp.13-20
• /
• 2008

본 논문에서는 무선 통신 응용 시스템에 적합하도록 슈도-세그멘테이션 기법을 이용하여 저 전력 12비트 80MHz D/A 변환기를 CMOS 0.18um n-well 1-Poly/6-Metal 공정으로 설계하였다. 슈도-세그멘테이션 기법은 간단한 병렬 버퍼로 구성된 이진 디코더를 사용함으로써 구조적으로 간단해지며 저 전력으로 구현이 가능하다. 또한, 스위칭 코어 회로에 글리치 억제 회로와 입력신호의 스윙을 감소시키는 구동 회로를 설계함으로써 추가적인 스위칭 잡음을 줄일 수 있었다. 측정 결과 제안한 저 전력 12bit 80MHz CMOS D/A 변환기는 샘플링 주파수 80MHz일 때, 입력 주파수 1MHz에서 SFDR은 66.01dBc, 유효비트수는 10.67비트를 보여주었다. INL/DNL은 ${\pm}1.6LSB/{\pm}1.2LSB$로 측정되었으며, 글리치 에너지는 $49pV{\cdot}s$로 나타났다. 전력 소모는 1.8V 전원 전압에서 최대 속도인 80MHz일 때 46.8mW로 측정되었다.

• 한국광학회지
• /
• 제31권5호
• /
• pp.223-230
• /
• 2020

본 논문에서는 전광섬유 master oscillator power amplifier (MOPA) 구조의 이터븀(ytterbium) 첨가 편광유지 광섬유 레이저의 유도 브릴루앙 산란 및 모드 불안정 특성에 대해 연구하였다. 이터븀 첨가 광섬유 및 신호 광원의 종류에 따라 레이저 출력 및 역반사 스펙트럼을 측정하여 광섬유 레이저의 출력 증폭 한계를 분석하였다. 레이저 구조의 최적화를 통해 단일모드 빔 품질을 갖는 전광섬유 고출력 편광유지 광섬유 레이저를 구현하였다. Pseudo-random binary sequence (PRBS) 신호에 의해 위상변조된 10 GHz의 선폭을 갖는 신호 광원을 적용하여 1.5 kW의 출력을 얻었다. 최대 출력에서 1.15의 빔 품질을 가지며, 17 dB 이상의 편광소광률 특성을 확인하였다.

• 한국광학회지
• /
• 제32권3호
• /
• pp.120-125
• /
• 2021

본 연구에서는 다파장 빔결합을 위한 master oscillator power amplifier (MOPA) 구조의 선편광 고출력 이터븀 첨가 광섬유 레이저를 개발하였다. 유도 브릴루앙 산란(stimulated Brillouin scattering, SBS)을 억제하기 위하여 pseudo-random binary sequence (PRBS) 신호로 위상 변조 및 비트길이를 최적화한 선폭 약 10 GHz의 시드 레이저를 구현하였으며, 이를 이용하여 3단 증폭을 하였다. 주 증폭단에서는 모드 불안정성 현상(mode instability, MI)의 문턱값을 높이기 위하여 코어 및 클래딩의 직경이 각각 20 ㎛, 40 ㎛인 편광유지(polarization maintaining, PM) 이터븀 첨가 광섬유를 이용하고 지름이 약 9-12 cm인 나선형 홈에 적용하였다. 그 결과, 입사된 여기광 대비 기울기 효율이 83.7%인 1.004 kW의 레이저 출력을 얻었다. 또한, 빔품질(M²)과 편광소광율(polarization extinction ratio, PER)은 각각 1.12와 21.5 dB로 측정되었다. 더욱이, 역방향 스펙트럼의 레일리 신호와 SBS 신호의 첨두 세기 비율은 2.36 dB로 관측되어, SBS가 완화된 레이저 구현을 확인하였다. 또한 증폭 출력에 따라 기울기 효율 및 빔품질의 저하가 없어 모드불안정이 발생하지 않음을 확인하였다.

• 한국해양공학회지
• /
• 제21권3호
• /
• pp.46-51
• /
• 2007

A multi-purpose environmental monitoring system has been developed as a commercially available standard using the technique of hetero-core spliced fiber optic sensors, for the purposes of monitoring large-scale structures and preserving natural environments. The monitoring system has been tested and evaluated in a possible outdoor condition, in view of the full-scale operation at actual sites to be monitored. Additionally, the developed system in this work conveniently provides us with various options of sensor modules intended for monitoring such physical quantities as displacement, distortion, pressure, binary states, and liquid adhesion. Two channels of optical fiber line were monitored in each channel, three displacement sensor modules were connected in series, in order to examine the performance to a pseudo-cracking experiment in the outdoor situation and to clarify temperature influences an the system, in terms of the coupling of optical connectors and the OTDR stability. The results from the pseudo-cracking experiment agreed with the actual cracks, by means of calculation, based an the detected displacement values and their geometrical arrangement of the used sensor modules. The temperature change, ranging from 10 to $20^{\circ}C$ resulting from the 10-days free running operation, was found to influence the system stability of ${\pm}10{\mu}m$, primarily due to the coupling instability of the used optical connectors. It was found that fusion splicing, rather than the use of connectors, reduced the fluctuation dawn to ${\pm}2{\mu}m$. The specification and performance of various option modules have been demonstrated to show the capability of inspecting various physical quantities by use of the single system, which would be suitable for multi-purpose environmental monitoring.