• Journal of Hydrogen and New Energy
• /
• v.29 no.4
• /
• pp.331-338
• /
• 2018

In this study, sulfonated PAES block copolymers have been synthesized via nucleophilic substitution reaction. Hydrophobic oligomer was prepared using 2,6-dihydroxynaphthalene and bis(4-chlorophenyl) sulfone, whereas hydrophilic oligomer was prepared using sulfonated bis(4-chlorophenyl) sulfone and bis(4-hydroxyphenyl) sulfone. The chemical structure of polymers was analyzed by $^1H$ NMR, FT-IR and GPC. The thermal properties of polymers were measured by TGA and DSC. The oxidative stability of membranes was investigated by Fenton's test. Furthermore, the proton conductivity of membrane was found to be 26 mS/cm at $90^{\circ}C$. All physiochemical properties suggest that fabricated membrane have a great potential for applications in PEMFC.

• Journal of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.319-324
• /
• 1990

Kinetic of substitution of dibenzoylmethanate (dbm) for one acetylacetonate (acac) in VO (acac)$_2$ have been studied in various solvents by spectrophotometry. Under the condition [VO (acac)$_2$] 》[Hdbm], the rate law for the substitution reaction is expressed as, rate = k$_2$K[VO(acac)$_2$] [Hdbm] / (1 ＋ K[VO(acac)$_2$]) where K = [VO (acac)$_2$dbmH] / [VO(acac)$_2$][Hdbm] and the rate constant k$_2$ corresponds to that of proton transfer from coordinated Hdbm to leaving acac- in VO(acac)$_2$dbmH.

• Journal of the Korean Society of Industry Convergence
• /
• v.8 no.3
• /
• pp.155-160
• /
• 2005

Kinetic studies were carried out for aquation of carbonatobis(ethylenediamine)cobalt(III) complexes in [H+] aqueous solution by UV/VIS-spectrophotometry. The rate law that in deduced from rate data is $rate=k_H{^+}[H^+]^{1.4}$ {$[Co(en)_2(CO_3)]^+$}1.0 where $k_H{^+}$ is the rate constant considering acidic catalyst, $H^+$ ion whose value is $0.241l{\cdot}mol^{-1}{\cdot}sec^{-1}$. The values of activation parameters Ea, ${\Delta}H^{\ast}$ and ${\Delta}S^{\ast}$ were $15.33Kcal{\cdot}mol^{-1}$, $14.52Kcal{\cdot}mol^{-1}$ and -57.49 e.u. respectively. On the basis of kinetic data and the observed activation parameters, we have proposed the mechanism that proceeds with two step protonations. The rate equation derived from the proposed mechanism has been in agreement with the observed rate equation. It has been seen that our modified mechanism for Harris's proton freequilibrium one prefer to the his concerted mechanism, and more the last product substitute $H_2O$ for $OH^-$ the Harris's mechanism in the acidity range 2 < pH < 5.

• Journal of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.504-509
• /
• 1989

Cobalt(III) complexes of N,N'-dimethylethylenediamine-N,N'-di-${\alpha}$-butyric acid(dmedba) and trifunctional aminoacids, [Co(dmedba)(L-aa)] (L-aa = S-methyl-L-cysteine, L-methionine, L-glutamic acid, L-aspartic acid) have been prepared from the reaction between the $ s-cis-[Co(dmedba)Cl_2]-^$ complex and the amino acid. The amino acids have been found to coordinate through the amine and carboxylate groups just like [Co(dmedda)(L-aa)]. The complexes obtained in this work were characterized by their proton magnetic resonance, infrared and visible absorption spectral data along with the elemental analyses.

• Journal of Hydrogen and New Energy
• /
• v.27 no.6
• /
• pp.660-669
• /
• 2016

A fluorinated-sulfonated, hydrophobic-hydrophilic copolymer was planed subsequently synthesized using typical nucleophilic substitution polycondensation reaction. A novel AB and ABA (or BAB) block copolymers were synthesized using sBCPSBP (sulfonated 4,4'-bis[4-chlorophenyl)sulfonyl]-1,1'-biphenyl), DHN (1,5-dihydroxynaphthalene), DFBP (decafluorobiphenyl) and HFIP (4,4'-hexafluoroisopropylidenediphenol). All block copolymers were easily cast and made into clear films. The structure and synthesized copolymers and corresponding membranes were analyzed using GPC (gel permeation chromatography), $^1H$-NMR ($^1H$ nuclear magnetic resonance) and FT-IR (Fourier transform infrared). TGA (Thermogravimetric analysis) and DSC (differential scanning calorimetry) analysis showed that the prepared membranes were thermally stable, so that elevated temperature fuel cell operation would be possible. Hydrophobic/hydrophilic phase separation and clear ionic aggregate block morpology was confirmed in both triblock and diblock copolymer in AFM (atomic force microscopy), which may be highly related to their proton transport ability. A sulfonated BAB triblock copolymer membrane with an ion-exchange capacity (IEC) of 0.6 meq/g has a maximum ion conductivity of 40.3 mS/cm at $90^{\circ}C$ and 100% relative humidity.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.6
• /
• pp.935-938
• /
• 2005

Nucleophilic addition reactions of benzylamines (BA; $XC_6H_4CH_2NH_2$) to $\alpha-cyano-\beta$-phenylacrylamides (CPA; $YC_6H_4CH=C(CN)CONH_2$) have been investigated in acetonitrile at 25.0 ${^{\circ}C}$. The rate is first order with respect to BA and CPA and no base catalysis is observed. The addition of BA to CPA occurs in a single step in which the addition of BA to $C_{\beta}$ of CPA and proton transfer from BA to $C_{\alpha}$ of CPA take place concurrently with a four-membered cyclic transition state structure. The magnitude of the Hammett ($\rho_X$) and Bronsted ($\beta_X$) coefficients are rather small suggesting an early tansition state (TS). The sign and magnitude of the crossinteraction constant, $\rho_XY$ (= −D0.26), is comparable to those found in the normal bond formation processes in the $S_N2$ and addition reactions. The normal kinetic isotope effect ($k_H/k_D\;{\gt}$ 1.0) and relatively low ${\Delta}H^{\neq}$ and large negative ${\Delta}S^{\neq}$ values are also consistent with the mechanism proposed.

• Journal of Hydrogen and New Energy
• /
• v.27 no.2
• /
• pp.155-162
• /
• 2016

A proton exchange membrane fuel cell (PEMFC) produces only water at cathode by an electrochemical reaction between hydrogen and oxygen. The generated water is transported across the membrane from the cathode to the anode. The transported water collected in water-trap and drained to the cathode within the humidifier outlet. If the condensate water is not being drained at the appropriate time, condensate water in the anode can cause the performance degradation or fuel efficiency degradation of fuel cell by the anode flooding or unnecessary hydrogen discharge. In this study, we proposed an optimization method of condensate water drain logic for the water drain performance and the water drain algorithm as considered the condensate water generating speed prep emergency case. In conclusion, we developed the water management strategy of fuel processing system (FPS) as securing fuel efficiency and operating stability.

• Journal of Applied Biological Chemistry
• /
• v.43 no.1
• /
• pp.37-43
• /
• 2000

1,3,2-Dioxaphosphorinanes are suitable compounds for studying the stereochemistry of substitution at phosphorus. Cis- and trans-5-hydroxymethl-5-methyl-2-thiono-2ethoxy-1,3,2-dioxaphosphorinane were prepared, and their structures and stereochemistry unambiguously assigned by NMR and X-ray crystallography with acetoxy and 3,5-dinitrobenzoyloxy derivatives, respectively. Trans isomer gave $^{31}P$ NMR signal at higher field than cis isomer, and the ring proton Spectrum of cis isomer showed characteristic pattern for identifying its geometry. In X-ray crystallography they adopted a chair conformation with the ethoxy groups in the axial positions, and the sulfide groups in the equatorial positions. A flattening of the ring around the phosphorus center was noted, the POC bond angles were about $120^{\circ}$, and the C-O bonds in the ring were significantly longer than the C-O bond for the ethoxy group or the C-O bond for hydroxyl group.

• Nuclear Engineering and Technology
• /
• v.48 no.2
• /
• pp.360-367
• /
• 2016

A windowless spallation target can provide a neutron source and maintain neutron chain reaction for a subcritical reactor, and is a key component of China's nuclear waste transmutation of coupling accelerator and subcritical reactor. The main issue of the windowless target design is to form a stable and controllable free surface that can ensure that energy spectrum distribution is acquired for the neutron physical design when the high energy proton beam beats the lead-bismuth eutectic in the spallation target area. In this study, morphology and flow characteristics of the free surface of the windowless target were analyzed through the volume of fluid model using computational fluid dynamics simulation, and the results show that the outlet cross section size of the target is the key to form a stable and controllable free surface, as well as the outlet with an arc transition. The optimization parameter of the target design, in which the radius of outlet cross section is $60{\pm}1mm$, is verified to form a stable and controllable free surface and to reduce the formation of air bubbles. This work can function as a reference for carrying out engineering design of windowless target and for verification experiments.

• Nuclear Engineering and Technology
• /
• v.4 no.2
• /
• pp.116-131
• /
• 1972

A fast neutron time-of-flight spectrometer has been constructed with suitable choice of target thickness and proton bombarding energy in Li$^{7}$ (p, n) Be$^{7}$ nuclear reaction for a continuous keV spectrum of neutrons at 0 degree in 1-nsec pulse from a Van do Graaff and a time-pick-up fast neutron detector assembled with a 5 mm-thick 92% enriched B$^{10}$ slab and four heavily shielded 4＂$\times$3＂ NaI scintillation detectors. Energy resolution of this spectrometer is better than 0.3% at 50 keV and the signal-to-background ratio is also improved. Total cross section measurements of several separated single isotopes have been carried out with this spectrometer and analyzed by Rmaxtrix multi-level computer code. The spin values and resonance parameters of each individual resonances are given.