• 대한가정학회지
• /
• 제42권1호
• /
• pp.53-67
• /
• 2004

The purpose of this study was to analyze anti-counterfeiting strategies of fashion firms in Korea. Data was collected by in-depth interviews for 25 fashion firms and 5 buying offices who had been victims of counterfeiting. The result showed that fashion firms recognized the counterfeiting, especially deceptive counterfeiting, as a serious problem in Korea and seek for stronger protection. Fashion firms adopted diverse strategies for the protection of trademark and for the protection of design； (1) Investigation and Surveillance, (2) Warning, (3) Prosecution, (4) Lawsuit, (5) Consumer education (6) High-tech tabooing, (7) Provide incentives, (8) Penalty, (9) Do nothing. Despite the diverse efforts, they proposed the most desirable strategies to deter the counterfeiting as the changes of consumer attitude and stronger legal protection.

• 한국환경과학회지
• /
• 제11권3호
• /
• pp.191-199
• /
• 2002

In this study, water protection reservoir is selected as the target which is located at the estuary of Taehwa river to analyze and examine the effects of hydraulic structure on river environment. This study aims at the definition of factors which cause the change of ecological environment of river due to the effects of the sediment protection reservoir, and the proposal of the direction of environmental friendly river space development through the analysis and examination of stream variation conditions and riverbed variation characteristics among many effects of hydraulic structure on river environment before and after removal of the sediment protection reservoir when design flow is yielded. Firstly, in case of removal the existing sediment protection reservoir, the hydraulic variation characteristics like depth drop due to removal of the sediment protection reservoir are thought of little because it is examined that depths drop with about 0.01m and 0.01~0.56m when low flow is yielded and design flood yielded, respectively. Nextly, as the examination result of the variation characteristics of flow velocity in case of removal the existing sediment protection reservoir, it is thought that the concern about riverbed erosion is not serious according to the analyzed result as the mean velocity of the channel section where the velocity varies in case of removal the sediment protection reservoir is about 0.07~1.36m/s when low flow is yielded, and is about 1.02~2.41m/s when design flood is yielded despite riverbed erosion is concerned as it is examined that flow velocity is getting increase as about 0.01m/s when low flow is yielded and about 0.01~0.44m/s when design flood is yielded. Lastly, from the prediction result of riverbed variation for each flow amount condition before and after removal the sediment protection reservoir, it is known that the variation range of riverbed is nearly constant when flow amount of the channel exceeds a specific limit as it is analyzed that the more flow amount, the more erosion and sediment in the channel section of down stream part of the sediment protection reservoir and the sediment protection reservoir~Samho-gyo, and the variation ranges according to flow amount between flood condition and design flood condition have little difference in the channel section of the upstream of Samho-gyo.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.711-713
• /
• 2004

In the past time, the protection relay did only a protection function. Currently, its upgraded device i.e. IED(Intelligent Electric Device) has been designed to protect, control, and monitor the whole power system automatically. Also the device is desired to successfully measure important elements of the power system. This paper considers design method of a digital protection IED with a function of measuring various elements and a communication function. The protection IED is composed of the specific function modules that are signal process module, communication module, input/output module and main control module. A signal process module use a DSP processor for analysis of input signal. Main control module use a embedded processor, Xscale, that has an ARM Core. The communication protocol uses IEC61850 protocol that becomes standard in the future. The protection IED is able to process mass information with high-performance processor. As each function module is designed individually, the reliability of the device can be enhanced.

• 한국항공운항학회지
• /
• 제25권4호
• /
• pp.130-140
• /
• 2017

Lightning protective design of an aircraft fuel system is closely related to the safety of the flight. Recently, composite material in building an aircraft becomes more important because it can reduce the weight of the aircraft. The composite materials decrease the protection against the effect of lightning. Lightning protective design of metal material aircraft has been researched for a long time and the design technique has been announced widely. However, research on the lightning protective design using composite material aircraft is very limited. In this study, lightning protective design for fuel tank structural component, access cover, fuel filler cap and drain valve in carbon fiber composite material aircraft have been presented. To show the compliance with FAA airworthiness standard regarding the presented protection designs, three steps, including lightning strike analysis, lightning environment analysis and certification test, were conducted in accordance with FAA AC 20-53.

• 대한안전경영과학회지
• /
• 제13권1호
• /
• pp.41-49
• /
• 2011

The automatic fire detection system is an important facility installed with focusing on minimizing the damage from a fire. This paper presents in the followings as the methods to reduce the false alarm of the automatic fire detection system; first, to prepare for legal standard so that revised legal standard can be applied to the fire fighting property prior to revision; second, to introduce the performance based fire detection protection design in the law based fire protection design; third, to maintain the wiring of worn-out detector; forth, to introduce an evaluation system to the education for the fire warden; fifth, to extend the standard of MTBF(meantime between failure) of the detector; sixth, to extend of installing the analog type detector; seventh, to improve the structure of reset switch.

• 한국화재소방학회논문지
• /
• 제24권1호
• /
• pp.81-89
• /
• 2010

건축물의 내화성능은 화재의 피해를 최소화하기 위해 요구되고 있으며, 건축물의 용도 및 층수 등에 따라 일률적으로 정해지고 있으나, 실제 발생되는 건축물 화재의 크기와 구조부재의 응력, 변형은 매우 다양한 조건에 의해 달라진다. 스웨덴, 영국, 뉴질랜드, 호주 및 일본 등의 국가에서는 건축물의 화재크기에 영향을 미칠 수 있는 여러 변수를 공학적인 수단을 활용하여 구조체 안전성을 평가하는 공학적 내화설계를 사용하고 있다. 본 논문은 공학적 내화설계의 경제적 효과를 검증하기 위하여 21층의 철골조 공동주택을 공학적 내화설계와 사양적 내화설계에 의한 내화피복비용을 비교분석하였으며, 그 결과 공학적 내화설계절차에 의한 철골조 아파트의 기둥부재 및 보부재는 무내화피복으로 내화성능을 만족하였으며, 내화피복비용 절감효과는 약 90% 수준으로 나타났다.

• 한국화재소방학회논문지
• /
• 제33권5호
• /
• pp.140-148
• /
• 2019

'소방시설 내진설계 의무화'에 발맞추어 내진설계의 신뢰성과 효율성 향상을 위해서는 설계 자동화 소프트웨어 개발이 필수불가결하다. 본 연구에서 개발한 내진 설계 자동화 S/W는 소방청의 「소방시설의 내진설계 기준(이하 "국내 기준")」에 따른 흔들림 방지 버팀대(이하 "버팀대")의 자동 배치, 계산서 출력 및 그리고 물량 자동 산출 등의 기능을 제공한다. 또한, 자동화 S/W는 설계자의 수동설계와 비교하였을 때 약 3배 정도의 업무 속도를 단축시켜줄 뿐만 아니라 버팀대 등의 설계물량과 관련한 휴먼에러를 줄임으로써 설계안의 신뢰성을 높여준다. 뿐만 아니라 그동안 보수적으로 접근했던 소방시설의 내진설계방식에 있어 적어도 버팀대 사용에 대해서 컴퓨터 알고리즘을 이용한 최적의 내진설계를 수행할 수 있었다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1996년도 학술발표회
• /
• pp.76-79
• /
• 1996

This paper provides an overview or an introduction covering the nature of explosions, explosion protection techniques and explosion protection systems(EPS), It is not intended to be a result for the design or research of protection including explosion suppression, venting, isolation, and an explanation to the mechanical system.

• 산업공학
• /
• 제25권4호
• /
• pp.382-392
• /
• 2012

Reactor protection system to keep nuclear safety and operational economy of plants requires high reliability. Such a high reliability of the system can be achieved through the redundant design of components. However, common cause failures of components reduce the benefits of redundant design. Thus, the common cause failure analysis, to accurately calculate the reliability of the reactor protection system, is carried out using alpha-factor model. Analysis results to 24 operating months are that 1) the system reliability satisfies the reliability goal of EPRI-URD and 2) the common cause failure contributes 90% of the system unreliability. The uncertainty analysis using alpha factor parameters of 0.05 and 0.95 quantile values shows significantly large difference in the system unreliability.

• 한국의류학회지
• /
• 제41권5호
• /
• pp.939-949
• /
• 2017

This study uses 3D printing technology to design and fabricate a fall impact protection pad with a spacer fabric structure. The design of the pads consists of hexagonal three-dimensional units connected in a honey-comb shape; in addition, the unit consists of a surface layer and a spacer layer. Protect pads were designed as either a hexagonal type or diamond type according to the surface layer structure; subsequently, a spacer filament was also designed as the most basic I-shape type. Designed pads were printed using four types of flexible filaments to select suitable material for a fall impact protection pad. Impact protection performance and bending stiffness were evaluated for the eight type of pad outputs. As a result of the impact protection performance evaluation, when the force of 6,500N was applied, the force passed through the pad was in the range of 1,370-2,132N. FlexSolid$^{(R)}$ and Skinflex$^{TM}$ showed good protection performance and cubicon flexible filament showed the lowest protection. NinjaFlex$^{(R)}$ was found to be the most flexible in the bending stiffness evaluation.