• 한국재난정보학회 논문집
• /
• 제5권1호
• /
• pp.66-74
• /
• 2009

As building heights increase, so do these challenges in Korea. High-rise buildings present a variety of challenges to fire safety and protection. The fire protection technology in our country is still on a weak situation which is mainly due to the lack of concerns by the government, companies and citizen. This paper provides general guidance regarding fire-related property protection system for high-rise building performance based design. The importance of high-rise building in of the number of occupants, the value of property, and the a catastrophic loss would have on the community all warrant an increased level of protection and life safety. Because, We have to prepare a new spacial code and standard guidance for fire protection at the stage of the high-rise building design.

• Corrosion Science and Technology
• /
• 제16권6호
• /
• pp.294-297
• /
• 2017

For the longer service life of steel pile, cathodic protection is selected sometimes at corrosive environment. The cathodic protection design improvement was investigated in this study. The current demand for cathodic protection was calculated from the potentiostatic current monitoring of the steel specimen in the deaerated soil samples. In this study, the current distribution was studied using the Boundary Element Method (BEM) and the Finite Element Method (FEM) numerical analysis methods. The optimum layout of the anode was developed and confirmed by numerical analysis. Under the conventional design of the anode, the length of the anode hole is same as the pile length. We found that, at the bottom end of the pile, the current density is too high. When the anode hole length was 80% of the pile length, the current consumption at the end was reduced. The construction cost of anode hole drilling was decreased about 20%, as compared to the conventional design. Furthermore, the life of the anode materials could be extended by reducing the current consumption at the end section. Using this approach, the construction cost was reduced significantly without any under-protection area on the steel piles.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권5호
• /
• pp.584-590
• /
• 1997

Harbour marine steel structures, which are served in severe marine environment, should be protected in appropriate method to reduce corrosion problems. Cathodic protection, one of the protection methods in terms of practical and economical point of view is being widely used to marine steel structures mentioned above. Recently it has been reported that the life of Al alloy anode with sacrificial anode for protection of harbour marine steel structures was shortened significantly than the original design life. In this study, the optimum cathodic protection design of harbour marine steel structures was investigated with parameter of sea water pollution degree.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.24-25
• /
• 2008

An Electrostatic discharge (ESD) protection has been a very important reliability issue in microelectronics, especially for RF (Radio Frequency) integrated circuits (ICs). This paper reviews design and analysis of on-chip ESD (electrostatic discharge) protection circuits for RF applications. Key issues in RF ESD protection, design methods, and RF ESD protection solutions are discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.633-636
• /
• 2003

Most of maritime metallic structures are adopted a CP(Cathodic Protection) System for protection of corrosion in advanced country. So, we had been developed a remote corrosion monitoring control system. And we want to know the characteristics of efficiency, reliability, durability and so on. On the view point of it, we have to test in real field. in terms of design, cathodic protection systems, corrosion monitoring systems and optimal corrosion control systems compare to general commercial products. So, these systems have being studied to improve their capability. In this paper, the result of field testing center design of intelligent cathodic protection system including anodes, a real-time wireless remote corrosion monitoring and corrosion control system are described in naval ports.

• 한국화재소방학회논문지
• /
• 제25권5호
• /
• pp.54-61
• /
• 2011

UAE(United Arab Emirates) 원전(원자력발전소)의 수출을 목적으로 UAE, 미국, 일본, 한국의 원전 화재방호규정을 상호 비교 검토하였다. UAE를 포함하여 미국, 일본의 원전 화재방호규정은 화재하중에 따른 화재위험도 분석결과에 따라 소화설비를 설치하도록 규정하고 있다. 반면, 우리나라는 소방관계법에서 원전을 발전시설로 구분하고 있으나, 원자력법에서는 원자로 및 관계시설로 분류하고 있고, 각 법률간 화재방호 설계기준도 상이하다. 앞으로 우리나라가 원전 수출국의 지위를 계속적인 유지하기 위해서는 화재 위험도분석의 결과가 설계에 반영될 수 있어야 한다. 결론으로, 국내 소방관계법이 원전의 특수성을 반영하기 위해서는 소방시설공사업법 시행령 제2조 2항의 성능위주설계를 해야 할 특정소방대상물에 원전이 추가되어야 함을 제안하였다.

• 전기학회논문지P
• /
• 제62권3호
• /
• pp.133-138
• /
• 2013

A large generator is an important role in transferring an electric power to power system. The IEDs of large generator often use microprocessor technology to obtain a digital relay system with a wide range of measuring, protection, control, monitoring, and communication functions. However, all generator protection and control systems in Korea imported from abroad and are being operated. In order to reduce the large expense and improve the reliable operation, development of generator protection and control system by domestic technology is required. This paper deals with the design of the IED of generator protection panel for development of generator protection and control system. The major emphasis of the paper will be on the description of hardware and signal processing test results and measurement accuracy of the prototype IED. By developing of generator IED based on DSP and microprocessor, replacement of the generator protection panel imports are expected to be effective.

• International Journal of Costume and Fashion
• /
• 제16권1호
• /
• pp.1-16
• /
• 2016

The purpose of this study was to explore fashion design and merchandising students' perception of creativity and the copyright protection of apparel design. A survey with open-ended questions was developed and distributed to a total of 100 fashion major students with specializations in apparel design and merchandising from three different universities located in a northwestern state of the United States. A majority of respondents showed their awareness that copying apparel design is ethically wrong and counterfeiting is legally wrong. They were able to distinguish between copying and interpreting and were aware that incorporating limited elements from inspirations was ethically acceptable. However, many of the students look for design inspiration from secondary sources, such as existing designers' works which they observe over the Internet, magazines, fashion shows, and store shopping, which may pose them to the temptation to copy such ideas. Although fashion copyright protection law has yet to become enacted, a majority of respondents support passage of fashion copyright protection law. The results give support to the needs for addressing the creative problem-solving processes and ethical decision-making jointly within apparel design and merchandising curriculum.

• 한국자동차공학회논문집
• /
• 제7권8호
• /
• pp.208-215
• /
• 1999

Using the orthogonal arrays and the occupant analysis software based on the multi-body dynamics , two interactive design algorithms are proposed to improve the initial design of the occupant protection systems. Algorithm 1 sequentially moves the narrow design space within the upper and the lower design limit. Algorithm 2 sequentially reduces the relatively wide design space. Each design algorithm is composed of two levels . The first level is to improve the characteristics of the crash performance considering the noise factors. In order to obtain the robust design, the second level reduces the variations the noise factors. In order to obtain the robust design, the second level reduces the variations due to the tolerance of the design variable. To utilize the algorithm 1, HIC(Head Injury Criterion) , 3 msec criterion value of the chest acceleration and the femur load decreased by 27.4%, 10.4% and 55.8%, respectively. To utilizer the algorithm 2 , the results decreased by 38.0%, 10.5% and 3.0% , respectively.

• 한국의류학회지
• /
• 제40권1호
• /
• pp.114-130
• /
• 2016

This research provides practical data to develop UV protection masks and dust protection masks. It surveyed uncomfortable factors and significant characteristics for masks. It used 653 subjects 20-79 years old and performed the research from April to May in 2014. Wearing masks at outdoor activities is not widely popular yet, but golf players, mountaineers and old people were quite interested in masks. People mainly wore a basic shape mask, but main age group of each mask shape was different. People usually prioritized the protection function and comfort of wearing over design; however, women, young generation and people attending to outdoor activities longer than 1 hour considered design quite important. People going on picnic or camping consider mask characteristics most important. Therefore, various mask shapes and protective functions should be developed to reflect consumer needs. Meanwhile, the discomfort levels of masks were not too high, but old people felt more discomfort than young people. The most discomfort factors were 'other's eye', 'distracting face movement' and 'feeling of foreign object'. They also mentioned falling problem of C shape mask and short-rib shape mask, and asked for a 'tighter fit' at the ear.