• 한국실내디자인학회논문집
• /
• 제23권3호
• /
• pp.134-143
• /
• 2014

The protection of Design is very important issues in these days. Even though Interior Design is also one of important design sections, it is relatively unprotected by formal intellectual property laws, yet creativity and innovation flourish. The needs for protection of Interior Design have been creased. The aim of this study is to suggest the weakness of the system for protection of Interior Design. The proposed research is comprised of two themes. One is to research Acts related to protection of Interior Design. The second is to study the registered cases under the Design Protection Acts. These two theme is generated by the comparative review between ROK and U.S.A. Through these comparative results, this study propose some considerations for an effective protection for Interior Design. Design need to be registered in the hole image of the space not a partial element. The concept needs to be protected because it is more effective way to respond the copying. Exterior for facade and Interior Design need to be registered in one registration to use the protection system actively.

• Corrosion Science and Technology
• /
• 제6권3호
• /
• pp.90-95
• /
• 2007

Cathodic protection technology has been widely used on ship's outer hull and inner side of ballast water tanks as a supplementary corrosion protection measure in combination with protective organic coatings. Impressed current cathodic protection system is typically opted for the ship's hull and, sacrificial anode system, for ballast water tanks. The anticipation and interest in cathodic protection system for ships has been surprisingly low-eyed to date in comparison with protective coatings. Computational analysis for the verification of cathodic protection design has been tried sometimes for offshore marine structures, however, in commercial shipbuilding section, decades old design practice is still applied, and no systematic or analytical verification work has been done for that. In this respect, over-rotection from un-erified initial design protocol has been also concerned by several experts. Especially, it was frequently reported in sacrificial anode system that even after full design life time, anode was remaining nearly intact. Another issue for impressed current system, for example, is that the anode shield area design for ship's outer hull should be compromised with actual application situation, because the state-of-the-art design equation is quite impractical from the applicator's stand. Besides that, in this study, some other critical design issues for sacrificial anode and impressed current cathodic protection system were discussed.

• International journal of advanced smart convergence
• /
• 제10권3호
• /
• pp.181-186
• /
• 2021

Among human intellectual creations, the right granted by law to what is worth protecting is defined as intellectual property rights. Copyright is a legal right to creative finished products made by individuals, and in recent years, this legal right has been recognized as very important. In other words, copyright is a system created to protect the rights of individuals who created creations and to recognize their efforts. Works subject to copyright vary from poetry, thesis, novels to designs, paintings, music, and architecture, and the scope of the subject is gradually expanding. Recently, research has begun on how far the Metaverse design area absorbed into the real world among works. Computer-generated video productions and software program works are also subject to digital copyright protection, but it is also true that the interpretation of the author protection law for works, designs, and trademarks in the virtual world is unclear. This study aims to analyze copyrights based on case studies and theoretical backgrounds on copyright protection and to discuss the protection limitations of Metaverse design in the virtual world. In other words, the direction for the protection of Metaverse design is presented through clear distinction and definition of copyright protection in the tertiary virtual world. This study aims to present methods for design copyright protection in the era of Metaverse, respect copyright holders' creative activities, and develop our culture through protection of creations.

• Journal of Astronomy and Space Sciences
• /
• 제1권1호
• /
• pp.35-39
• /
• 1984

Space Shuttle의 성공적인 비행을 가능케한 요인중의 하나가 Silica Tile을 사용한 재사용 할 수 있는 Thermal Protection System의 설계이었다. 이러한 Thermal Protection System의 기본 설계 개념을 밝히고 또한 Silica Tile의 생산 공정과 Tile System의 구조를 서술하였다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.423-438
• /
• 1997

Today's building and fire prevention codes are mostly prescriptive. Prescriptive codes are based on major fires in earlier years that created a need for specific building provision. These codes provide a minimum level of safety. As the general and engineering uses of computers have increased over the years, so has use of computers in the fire protection engineering. This has allowed fire protection engineers to develop alternative approaches to solve today's fire protection problems or to evaluate the performance of a specific fire safety goal. A performance based approach to building and fire codes involves the following: 1) identifying specific goals, such as, safely getting out of the building in 10 minutes, 2) obtain conceptual approval from authorities, 3) define performance level, 4) develop design solutions and identify tools such as, fire tests, models, or methods, to demonstrate that a design will meet the fire protection objective 5) test solutions, 6) present test method and results to the authorities. Some people in the fire protection community consider this to be nothing more than an intellectual exercise, while the others view it as a way to reduce expenses on large project$^4$ Others in fire protection community view this as a way to refine the design process to design fire protection systems to better protect the fire hazards. This paper will focus on application of these tools, specifically computer fire models, to actual cases such as: design of a smoke control system heat transfer analysis and egress of building occupants during potential fires.

• 한국표면공학회지
• /
• 제49권5호
• /
• pp.408-415
• /
• 2016

The offshore structures exposed to harsh corrosive such as the marine environment is essential for the quality management technique throughout the life cycle of initial design, construction and operation. Also, it should satisfy the design life and ensure the safety of the substructure with optimization of design process. This study focused on optimization of design condition for corrosion protection of wind turbine structure and computational analyzing was performed to evaluate the performance of corrosion protection with utilizing practical experimental data. We expect this analytical study contribute to improve the corrosion maintenance stability and economical efficiency of designing wind turbine structures. As a result, the design of cathodic protection system using sacrificial anodes required accurate identification of current density in order to meet the long term design life, which can be seen that a change of structure surface's coating breakdown factor is one of the key influencing factors.

• 한국안전학회지
• /
• 제19권1호
• /
• pp.102-107
• /
• 2004

Performance based design is a recent evolutionary step in the process of designing fire protection systems. In essence, it is a logical design process resulting in a solution that achieves a specified performance. Sometimes the prescriptive solutions presented in various codes and standards are too expensive or inflexible. Often the solutions do not and enables optimization of a solution for cost and function. In this study, performance based design was carried out to determine the extent of passive fire protection for oil terminal facilities. The results of performance based design were compared with those of prescriptive code based design. Performance based design is not always more economic than prescriptive code based design but provides more reliable and effective design that is fit for the purpose.

• 조명전기설비학회논문지
• /
• 제24권11호
• /
• pp.23-29
• /
• 2010

The principal factor determining an optimum design method for cathodic protection is finding the protection current for preventing the corrosion of existing, already laid pipe. Some factors currently used to test designs include the sizes and lengths of pipes, soil resistivity, and the coating damage rate. We believe this method and current formulae are not optimum due to the uncertainty of determining the coating damage rate and the corrosion protection current's density. This paper analyzes the amount of protection current obtained by performing a temporary current test using data describing existing laid pipe. We then propose determining the corrosion protection current by using the temporary current test after modifying the formula. In addition, we suggest a way to choose optimized cathodic protection and the process of design by executing the design and taking account of such factors as a site condition of 34km-long non-protected water supply pipe lines (stages I and II) in ${\bigcirc}{\bigcirc}$ region, climate, interferences, and durability.

• 복식
• /
• 제66권1호
• /
• pp.28-41
• /
• 2016

This paper is aimed at intensively examining the scope of legal protection for fashion designs under the Design Protection Act of Korea. For this purpose, this looked into how the Act defines the concept of design, its requirements, and the prerequisites for acquiring design rights. The study also reviewed statutory interpretations over the judgment of the identity and similarity of designs. For more practical and substantial discussions, this research utilized cases and precedents, which had relevant legal principles. This study also figured out how both the requirements for a design definition - such as merchantability, configuration, visibility, and aesthetics - and the prerequisites for acquiring design rights - like industrial applicability, novelty, and creativity - are interpreted and utilized in actual circumstances. The authors expressed their opinions regarding the criteria of judging the identity and similarity of designs, based on a study of previous cases. Previous rulings show that aesthetics of the exterior design is used as the criteria for determining whether a design is same or similar. So, two designs, which have different specific details, are deemed same or similar, if both designs show similarity in the dominant elements. This is because both designs will produce similar aesthetic qualities. However, if the dominant elements of a design are part of the public domain, and the specific details characterize the design, the latter has to be evaluated in the process. This paper examined scope of legal protection for fashion designs using relevant precedents. The study may serve as academic materials that lead to the establishment of rightful ownership in creative activities.

• 대한기계학회논문집A
• /
• 제28권9호
• /
• pp.1384-1390
• /
• 2004

The full containment Liquefied Natural Gas(LNG) storage tank is based on a double liquid container concept : two separate containers, one within the other, are capable of containing the LNG. The outer concrete tank provides comer protection(secondary containment) to withstand and safely contain any spill from the inner tank. The comer protection is installed on inside corner surface of outer concrete tank. Because of high and complex stresses, corner protection is designed by ASME section ⅧI Div. 2, Appendix 4 on behalf of API 620 which is main design code for LNG tank. Design guidelines to determine design factors such as liner thickness and knuckle radius are not well understood because Appendix 4 is the design method not based on equation but FEM. Recently, the volume of LNG tank shows a tendency to increase. So it is necessary to set up the design guidelines to cope with change of LNG tank capacity and height/diameter ratio. In this paper, optimum design of corner protection was performed and the design guidelines were suggested by the results of FEM for LNG tanks which have different capacities and height/diameter ratio.