• The Journal of Advanced Prosthodontics
• /
• v.13 no.1
• /
• pp.1-11
• /
• 2021

PURPOSE. The study compared the color change, lightness, and translucency of hybrid resin ceramics exposed to toothbrush abrasion and surface treatment. MATERIALS AND METHODS. Four hybrid ceramics [Lava Ultimate (LU), Vita Enamic (EN), Shofu HC (SH), and Crystal Ultra (CU)] were compared with a glass-ceramic (Vita Mark II) control. One hundred and twenty specimen blocks were prepared using a precision saw machine. Specimens in each material were divided into four subgroups based on the surface treatment (polishing or staining) and a storage medium (water or citric acid). Simulated tooth brushing with a mixture of 100 RDA (radioactive abrasives) with 0.3 ml distilled water was used for 3650 cycles (7300 strokes) for each specimen. Measurements for the color change, lightness, and translucency were measured after toothbrushing using a spectrophotometer. Statistical analysis compared outcomes using paired t-test, ANOVA, and Tukey post hoc test. RESULTS. The maximum color change was identified in SH (stained acid) [1.44 (0.40)], whereas the lowest was identified in EN (polished water) [0.66 (0.16)] material. The maximum and minimum loss of surface translucency was observed in SH (polished water) [12.3 (0.52)] and EN (stained acid) [6.5 (0.55)] specimens, respectively. Lastly, loss of lightness was the highest in VM (polished acid) [69 (0.95)], whereas the lowest was observed in CU (stained water) [56.7 (0.86)]. CONCLUSION. The comparison presented a significant effect of toothbrush abrasion on translucency and lightness of the hybrid resin ceramics. Color change was not significantly influenced irrespective of the storage medium employed. Surface staining demonstrated the preservation and stability of color and optical properties under the influence of toothbrush abrasion and chemical trauma.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.28.1-28.6
• /
• 2016

Backgrounds: Insufficient intermaxillary space is caused by non-restoration following tooth extraction in the past, and this involves eruption of the opposing teeth and changes of the arch structure. Such cases are difficult just by a simple prosthetic approach, and diversified treatment plans should be established. Among these, posterior maxillary segmental osteotomy (PMSO) is an efficient treatment option than extraction of opposing teeth as it surgically repositions multiple erupted teeth and alveolar bone. PMSO can preserve the natural teeth; therefore, it is being regarded as a treatment method which can improve insufficient intermaxillary space significantly. Case presentation: In this case report, the first patient received PMSO in order to place an implant in the mandibular edentulous space after decreased vertical dimension is restored, and the second patient received PMSO along with orthodontic treatment to obtain the intermaxillary space and balance the interarch molar width. Conclusion: PMSO is the treatment of choice when occlusion is compromised in the presence of decreased vertical dimension or arch length discrepancy.

• Journal of Korean Academy of Dental Administration
• /
• v.7 no.1
• /
• pp.10-20
• /
• 2019

Korean dental hygienists perform more tasks in dental clinics than are described in the law. The purpose of this study was to investigate the actual work of Korean dental hygienists in dental clinics using an observational study design. Two dental hygienists observed and recorded the work performed in 1 day from the time of commencement to the time of leaving work by 18 dental hygienists working in the dental clinic in a single area. Data management, prevention of infection, counseling, calculus removal, radiography, assistance of fixed orthodontic treatment, assistance of fixed prosthetic treatment, and preparation for implant surgery were recorded. Among the tasks that take more than 1 min, the most time-consuming tasks were document management, infection control, consultation, calculus removal, preparation for implant surgery, assistance of orthodontic treatment, and assistance of fixed prosthetic treatment. Korean dental hygienists are performing various tasks, such as infection control, dental hospital/clinic management, oral disease prevention, and dental treatment assistants.

• The Journal of the Korean dental association
• /
• v.48 no.9
• /
• pp.654-663
• /
• 2010

The success in periodontal-prosthetic therapy lies in patient satisfaction with subjective and customized treatment regimen that has been refined for individual needs. To fulfill these requirements, multiple predictors may have to be taken into consideration in the comprehensive treatment planning. Incorporation of complex factors that guarantee the evidence-based therapy would include, but not limited to, osseous morphology, biotype of gingival around abutment, bone morphology of interdental bone and those around furcation area, abutment or bridge mobility. The periodontal-restorative interface should be of mutually protective. Also strategic and esthetic value of abutment teeth to be restored should also be taken into consideration. Taken together, all these should work in concert to enhance the predictability and longevity of abutment teeth in periodontal-prosthetic therapy.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.26 no.2
• /
• pp.130-142
• /
• 2017

There are frequent cases of retreatment due to lack of communication between dentists and dental technicians during general prosthetic treatment. The success of large-scale therapy begins with small treatments. This report reminds you of the importance of communication through a simple example. To reproduce better colors and shapes, the dentist must provide specific and accurate information and feedback to the dental technician, and the dental technician must have the skills to accurately analyze and express it. In this process, we need to create an environment where we can exchange mutual opinion and produce better prostheses.

• The Journal of the Korean dental association
• /
• v.47 no.9
• /
• pp.567-575
• /
• 2009

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.4
• /
• pp.347-352
• /
• 2013

Malignant tumours of the oral cavity that require resection of the tongue result in severe deficiencies in speech and deglutition. In such patients, improvements in mastication, swallowing, and speech may be reasonable goals for treatment. The viability of a prosthodontic approach to treatment depends on the type and extent of surgery. In a total glossectomy, a mandibular tongue prosthesis is the treatment of choice. Mandibular tongue prosthesis occupies the space in the floor of the oral cavity. It provides the patients with a platform for directing food into the esophagus and aids in speaking. This type of prosthesis can achieve that protection of the underlying fragile tissue and improvement in appearance and psychosocial adjustment. This case report describes the technical steps involved in prosthetic rehabilitation for a glossectomy patient.

• The Journal of the Korean dental association
• /
• v.50 no.3
• /
• pp.126-139
• /
• 2012

Loss of dentition can lead to not only compromised esthetics and functions of the patient, but also alveolar bone resorption. Bone grafting with prosthetic reconstruction of the gingiva can be selected for the treatment, and it provides many benefits as prosthetic gingival reconstruction does not require a complicated surgical process and is available within a short period of time, with stable clinical results. However, conventional porcelain fused to metal prosthesis has certain limits due to its size, and deformation after several firing procedures. In this clinical report, the author would like to introduce a patient with severe alveolar resorption who was treated with gingiva-shaped zirconia/titanium CAD/CAM implant fixed prosthesis for esthetic and functional rehabilitation. Clinical reports Clinical report 1, 2 : A case of loss of anterior dentition with atrophied alveolar bone. Implant retained zirconia bridge applied with Procera implant bridge system to simulate the gingiva. Upper structure was fabricated with zirconia all ceramic crown. Clinical report 3, 4 : A case of atrophied maxillary alveolus was reconstructed with fixed implant prosthesis, a CAD/CAM designed titanium structure covered wi th resin on its surface. Anterior dentition was reconstructed with zirconia crown. Conclusion and clinical uses. All patients were satisfied with the outcome, and maintained good oral hygiene. Zirconia/titanium implant fixed prosthesis fabricated by CAD/CAM system was highly accurate and showed adequate histological response. No critical failure was seen on the implant fixture and abutment overall. Sites of severe alveolar bone loss can be rehabilitated by implant fixed prosthesis with CAD/CAM system. This type of prosthesis can offer artificial gingival structure and can give more satisfying esthetics and functions, and as a result the patients were able to accept the outcome more fondly, which makes us less than hard to think that it can be a more convenient treatment for the practitioners.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.3
• /
• pp.1-32
• /
• 1991

Tho osseointegrated dental prosthetic treatment has develped for the edentulous patient with severely resorbed alveolar ridge, and has given us a successful clinical results to date. Nowadays the partially edentulism is included among the indications of the osseointegrated prosthetic treatment. The purpose of this study was to analyze the stress distribution at supporting bone according to the types of connection modality between implant and tooth in the superstructure. Two dimensional finite element stress analysis was applied for this study. FEM models were created using software Super SAP for MBM 16bit personal computer. Three modalities of connection were modeled and analyzed under load condition. The results were as follws: 1. The stress develped at tooth and implant in the cancellous bone was lower in the case of rigid connection than in the case of norigid connection, but higher between the two implants in the case of rigid connection than in the case of nonrigid connection. 2. The stress developed at the cortical bone and at the supporting bone interface was lower in the case of rigid connection than in the case of nonrigid connection 3. The stress developed at the supporting tissue interface of the implant nearby the tooth, was lower in the case of rigid connection than in the case of nonrigid connection. 4. The stress developed at the supporting tissue interface of posteriormost implant, was same between the cases of rigid and nonrigid connection. 5. The stress distribution related to the freestanding case was generally similar to the stress distribution pattern of nonrigid connection case. 6. The magnitude of applied load which produces deformation within elastic limit, had influence on the absolute value of stress, but had no influence on the pattern of stress distribution of the same case.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.2
• /
• pp.93-101
• /
• 2016

The average life expectancy has been increased, so the proportion of elderly patients that visit to the dental clinic for prosthetic restoration has increased. Elderly patients have various chronic diseases. Recent trends show an increase of osteoporosis in elderly patients, and thus, the number of osteoporosis patients is expected to escalate. Currently, the most widely used drug for osteoporosis is bisphosphonate. However, osteonecrosis of the jaw has been reported as a side effect derived from longterm oral administration or injection treatment of the drug. Surgical dental treatment was the main cause of medication related osteonecrosis of the jaw (MRONJ). As MRONJ is very difficult to cure, it is important to take preventive measures. Surgical operation may be needed for the mouth preparation before prosthetic restoration. For successful treatment, the dentist should have a full understanding of osteoporosis and show a continued interest toward this disease for careful management.