• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.5
• /
• pp.567-578
• /
• 2007

Statement of problem: The endodontically treated tooth is generally restored with post and core, owing to the brittle and the loss of large amount of tooth structure. As periodontal treatment was developed, there are many cases that periodontally involved teeth used in prosthetic treatment. Purpose: The purpose of this study was to analyze the stress distribution in the dentin and post structures by the various post materials and the amount of remaining alveolar bone height. Material and method: The 3-dimensional finite element models of mandible 1st premolars were divided into six types according to the various amount of remaining alveolar bone and post type. All types were modeled using equal length, diameter and shape of the post. Three types of post and core materials were used: prefabricated titaniumpost and amalgam core, prefabricated stainless steel post and amalgam core, and cast gold post and core. 300 Newton force was applied to functional cusp of mandible 1st premolar. Results: The results were as follows: First, there was no apparent difference in the pattern of stress distribution according to the alveolar bone condition concentrate on the post middle area. Second, there was difference in pattern of stress distribution according to the core materials, gold post and core generated same than amalgam core. Third, there was no apparent difference in the pattern of stress distribution within the dentin according to the post and core materials. But a cast gold post and core generated the lowest maximum stress value, a stainless steel post generated the highest maximum stress value. Fourth, in the reduced alveolar bone model, maximum stress value is 1.5 times than that of the normal alveolar bone model. Conclusion: Within the limitations of this study, to provide minimal stress to the root with alveolar bone reduced, the post length may be as long as apical seal was not destroyed. To prevent fracture of tooth, it is rational to use gold alloy which material was good for stress distribution for post materials.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.1
• /
• pp.53-60
• /
• 2017

When attempting to restore the oral function of a partially edentulous patient, there are a number of prosthetic treatment options available, depending on the structure of remaining teeth. For example, when only one set of maxillary and mandibular teeth are diagonally in place across from each other, it is difficult to gain stable occlusion. In this case, implants can be put in place at the corresponding edentulous area to achieve balance. By doing so, a stable occlusion can be achieved. For this case report, a patient with crossed occlusion after extraction was treated with maxillary RDP (removable dental prosthesis) and mandibular implant-supported RDP (removable dental prosthesis). Moreover, an implant fixture was placed under the posterior molar of the distal extension base diagonally across from the remaining maxillary teeth. Then, magnetic attachment was implemented. According to the patient who received the treatment, the result was functionally and aesthetically satisfactory.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.4
• /
• pp.391-398
• /
• 2011

The infraocclusion usually occurs in the mixed-dentition stage, and it is commonly accepted that the cause of the infraocclusion is ankylosis. The treatment options for patient with infraocclusion of primary molars are observation, restoration or surgical removal of the affected teeth. If the successors are present, most of the infraoccluded and ankylosed primary molars may occur normally. However, when the permanent successors are absent and the progression of infraocclusion is found, affected teeth may need to be extracted. In the case of infraocclusion which can cause vertical alveolar defect due to ankylosis, extraction before growth spurt should be performed for the future prosthetic treatment. A six-year-old female had the ankylosis and infraocclusion of multiple primary molars and congenital missing of premolars. The affected primary molars were extracted before growth spurt to avoid a significant vertical ridge defect and to promote the vertical development of alveolar bone, and the result was observed for many years. The purpose of this report is to report the management of multiple infraoccluded primary molars without permanent successors in a young patient.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.1
• /
• pp.41-47
• /
• 2013

Maxillary canines are the most commonly impacted or ectopically erupted teeth. If we find the abnormality of maxillary canines early, we can manage it reasonably and systematically. If we cannot see the spontaneous normalization at the periodic recall, primary canine extraction will be the next treatment choice. However, if the primary canine is extracted too early, the extraction socket will be filled with hard bone and then the eruption pathway can be locked. So it is more beneficial to extract the primary canine at the period about 6 months before the normal canine eruption time. The next treatment plan can be surgical and orthodontic approaches before the root apical closure of the impacted canine. Sometimes, surgical extraction and further prosthetic procedure can be needed for a severely malposed impacted canine or badly resorpted incisor. This is the case of the idiopathic mesial movement of impacted maxillary canines.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.5
• /
• pp.463-476
• /
• 2001

Since the treatment of edentulous patients with osseointegrated implant was first introduced more than 30 years ago, implant therapy has become one of the most important dental treatment modalities today. Based on the previous experience and knowledge, $Br{\aa}nemark\;Novum^{(R)}$ protocol was introduced with the concept of simplifying surgical and prosthetic technique and reducing healing time recently. This protocol recommends the installation of three 5mm wide diameter futures in anterior mandible and the prefabricated titanium bars for superstructure fabrication. This study was designed to analyze the stress distribution at fixture and superstructure area according to changes of fixture number, diameter and superstructure materials. Four 3-dimensional finite element models were fabricated. Model 1 - 5 standard fixtures (13mm long and 3.75mm in diameter) & superstructure consisted of type IV gold alloy and resin Model 2- 3 wide diameter fixtures (13mm long and 5.0mm in diameter) & superstructure consisted of type IV gold alloy and resin Model 3-3 wide diameter fixtures (13mm long and 5.0mm in diameter) & superstructure consisted of titanium and resin Model 4-3 wide diameter fixtures (13mm long and 5.0mm in diameter) & superstructure consisted of titanium and porcelain A 150N occlusal force was applied on the 1st molar of each model in 3 directions - vertical($90^{\circ}$), horizontal($0^{\circ}$) and oblique($120^{\circ}$). After analyzing the stresses and displacements, following results were obtained. 1. There were no significant difference in stress distribution among experimental models. 2. Model 2, 3, 4 showed less amount of compressive stress than that of model 1. However, tensile stress was similar. 3. Veneer material with a high modulus of elasticity demonstrated less stress accumulation in the superstructure. Within the limites of this study, $Br{\aa}nemark\;Novum^{(R)}$ protocol demonstrated comparable biomechanical properties to conventional protocol.

• Journal of Yeungnam Medical Science
• /
• v.8 no.1
• /
• pp.198-205
• /
• 1991

We obtained successful functional and esthetic results by grafting of iliac marrow-cancellous bone in 2 cases of alveolar-palatal cleft patients. Bone graft of alveolar-palatal clefts provide bony support to adjacent teeth of cleft area, prevented from relapse of orthodontic arch expansion, closure of oroantral fistula and improvement of speech problem. 1. In one case, extraction of upper right central incisor that was little bone support, alignment of rotated teeth and expansion of collapsed arch segment were done with pre-ortodontic treatment. The other case, Bone grafting was done after removal of prosthesis with no preorthodontic treatment. 2. After mucoperiosteal incision in cleft area. The mucosal flap of labial area, palate and nose were separation and the raised nasal mucosa was sutured for closure of oroantral fistula. Then, the iliac marrow-cancellous bones were grafted to cleft site. 3. After 6 months of operation, we had seen the new bone deposition to cleft site in dental radiography and prosthetic treatments of missing teeth were done.

• Journal of Chest Surgery
• /
• v.39 no.4 s.261
• /
• pp.298-303
• /
• 2006

Background: This study was performed to investigate the outcomes of vascular operations that were done in patients with atheroscerosis obliterans (ASO) of lower limb. Material and Method: Forty patients underwent vascular operations from December 1996 to June 2004. The patient's records were analyzed retrospectively. Mean age was $66{\pm}8$ years (range, $47{\sim}81$ years). Gender ratio was 37:3 (male:female). Result: The operations were done on 50 lower limbs of 40 patients. The names of operations were femoropopliteal bypass in 12 patients (30%), femorofemoral bypass in 12 (30%), femorofemoral bypass and femoropopliteal bypass in five (12.5%), aorta-lower limb artery bypass in five (12.5%), axillofemoral bypass in two (5%), iliopopliteal bypass in two (5%), and endarterectomy in two (5%). All bypass surgeries were done with prosthetic conduits. Mean follow up period was $33.2{\pm}23.2$ months (range, $3.8{\sim}90.2$ months). The cumulative patency rates of 1 and 5 years were 75.5 and 58.7% respectively. In six patients, amputation of the lower limb was done. In eight patients, 12 complications occurred. After the first operation, 10 patients underwent reoperations. Conclusion: Our lower limb arterial bypass surgery revealed acceptable patency rate, but not a few patients required reoperations. An epochal treatment modality that can inhibit the progress of ASO and improve long term patency should be established.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.2
• /
• pp.238-247
• /
• 2021

Congenital tooth agenesis is the most common developmental dental anomaly, of which oligodontia is defined as the absence of six or more permanent teeth, except the third molars. Tooth agenesis causes malocclusion, alveolar atrophy, aesthetic and psychosocial problems. This clinical report describes a multidisciplinary treatment for a patient diagnosed as oligodontia, who exhibited absence of 14 permanent teeth, atrophy of maxillary alveolar bone, and mandibular protrusion. Restoration space was secured and tooth axis was improved by the extraction of deciduous teeth and orthodontic treatment. However, edge-to-edge bite of posterior teeth and arch dimension discrepancy due to atrophic maxilla was remained. To restore the aesthetics and functionality, implant retained prosthesis was planned. Considering minimal bone grafts, location and number of dental implants and prostheses design were determined. Through the gradual adjustment of provisional restoration, the appropriate centric and eccentric occlusion was reflected into a definitive prosthesis. Currently, stable functional results were attained, however, regular follow up and maintenance care over lifetimes should be performed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.1
• /
• pp.119-126
• /
• 2022

Mini-implant has been reported as an alternative method to conventional diameter implants in the treatment of mandibular anterior region with narrow ridge. However, one-piece type mini-implant showed biological and technical complications, such as peri-implantitis by residual cement and prosthetic detachment. Recently, one-piece type mini-implant with additional retentive structure has been introduced to increase the retention and stability of the mini-implant. The mini-implant is based on spreading the upper retentive structure with a spreader and connected it with the inner surface of the zirconia prosthesis. In two cases, we tried to reduce these complications through the mini-implant on the narrow mandibular anterior region, and it was possible to reduce the overall treatment period through a digital system. In this case report, restoration using the digital mini-implant system showed improvement of patient satisfaction on the aspect of function and esthetic in the narrow mandibular anterior region.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.3
• /
• pp.215-226
• /
• 2023

Severe wear of the anterior teeth facilitates the loss of anterior guidance, which protects the posterior teeth from wear during excursive movement. Additionally, when treating patients with collapsed occlusion due to multiple tooth loss and tooth wear, it is important to determine the presence of vertical dimension loss through accurate clinical and radiographic examinations and diagnostic wax-up. The patient of this case is a 44-year-old female patient who complained of overall tooth wear and loss of posterior teeth due to bruxism and clenching habits, visited the hospital with the address of restoring masticatory function and improving aesthetic appearance through prosthetic treatment. Through model analysis and diagnostic wax-up, an increase in vertical dimension was determined, and full mouth restoration with fixed prostheses was planned. The degree of adaptation to the vertical dimension was confirmed step by step using an occlusal splint designed with CAD (Computer aided design) software and 3-D (3-Dimensional) printed, and then restored with provisional restoration and after a 4-month adaptation period, the entire dentition was restored with metal ceramic crowns and implants. Through this procedure, satisfactory treatment results were obtained in terms of function and aesthetics.