• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.5
• /
• pp.7-14
• /
• 2003

Exhaust Gas Recirculation (EGR) system is used to reduce NOx emission, to improve fuel economy, and to suppress knock since it offers the benefits of the inlet charge dilution. The effects of EGR was investigated on the performance and emission to reduce exhaust thermal load with a single cylinder liquid-phase LPG injection engine, in a wide range of EGR rate, engine conditions and LPG proportions. As EGR rate was increased, NOx was reduced while HC was increased. Pumping loss reduction by EGR improved bsfc and increased EGR lowered exhaust gas temperature. And, LPG proportions were made a difference on the performance and emission characteristics.

• Journal of the Korea Institute of Building Construction
• /
• v.3 no.3
• /
• pp.91-97
• /
• 2003

At present, the antiwashout underwater concretes are used as popular construction materials in European countries, the United States and Japan. The water-soluble polymers in the antiwashout underwater concretes provide excellent segregation or washout resistance, self-compaction and self-leveling property to the concretes. The purpose of this study is to recommend to optimum mix proportions of antiwashout underwater concretes according to compressive strength of 300kgf/$\textrm{cm}^2$ to 500kgf/$\textrm{cm}^2$. The antiwashout underwater concretes are prepared with various unit cement content, unit water content, sand-aggregate ratio, unit antiwashout agent and superplasticizer content. And they are tested for flowability, and compressive strength. From the test results, it is possible to recommend the optimum mix proportions of antiwashout underwater concretes according to compressive strengths within the range of 300kgf/$\textrm{cm}^2$ to 500kgf/$\textrm{cm}^2$.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.185-188
• /
• 2004

The effect of fly ash to prevent detrimental expansion due to alkali -silica reaction was investigated through the ASTM C 1260 method that is one of the most commonly used method because results can be obtained within about 16 days. Reactive aggregate used is a netamorphic rock and sedimentary rock. The replacement proportions of portland cement by fly ash were respectively 0, 5, 10, 15, 25 and 35 percent. Expansion of mortar bars due to alkali-silica reaction decreased with the increase of fly ash content. The results show that the expansion due to alkali-silica reaction is dramatically reduced in the presence of high volume fly ash. When the fly ash content examine from all angles (strength and a flow), the replacement proportions of fly ash is about $25\%$ in order to control on expansion.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.437-440
• /
• 2006

Generally, the strength of concrete depends on factors of materials, mix proportions, compaction, manufacturing methods and curing and so on. And recently, it has increased the using of crushed sand for concrete due to the exhaustion of good natural aggregate. This is an experimental study to compare and analyze the fluidity and compressive strength of ultra-high strength concrete according to the replacement ratio of crushed sand. For this purpose, the mix proportions of concrete according to the W/B ratio and replacement ratio of crushed sand was selected. And then air content, slump-flow, O-lot, compressive strength test were performed.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.3
• /
• pp.919-925
• /
• 2006

Maximum likelihood estimate(MLE) is obtained from the partial log-likelihood function for the cell probabilities of two way incomplete contingency tables proposed by Chen and Fienberg(1974). The partial log-likelihood function is modified by adding lagrangian multiplier that constraints can be incorporated with. Variances of MLE estimators of population proportions are derived from the matrix of second derivatives of the loglikelihood with respect to cell probabilities. Simulation results, when data are missing at random, reveal that Complete-case(CC) analysis produces biased estimates of joint probabilities under MAR and less efficient than either MLE or MI. MLE and MI provides consistent results under either the MAR situation. MLE provides more efficient estimates of population proportions than either multiple imputation(MI) based on data augmentation or complete case analysis. The standard errors of MLE from the proposed method using lagrangian multiplier are valid and have less variation than the standard errors from MI and CC.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.1
• /
• pp.53-60
• /
• 2004

Roller-compacted concrete(RCC) dam have gained acceptance worldwide in a relatively short time due to their low cost, which is derived in part from their rapid method of construction. And RCC has recently emerged as an economically attractive material for dam construction, replacing the use of conventional concrete and even challenging the economics of earthfill and rockfill embankment dams. There are existing two major mix design methods. one used in USA and the other used in Japan. In this study, proper mix proportions of concrete for RCC dam is obtained using method of compound their merit.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.33
• /
• pp.93-102
• /
• 1995

In this study we are concerned with the diagnostics method of cross-classified categorical data using logistic regression model of binary response models for cell proportions. under this model, we could examine the goodness-of-fit of the models using Pearson's $x^2$test statistic and likelihood ratio statistic. Under this model, these statistics are assumed that sample survey schemes are with replacement sampling model. But these statistics are often inappropriate for analysing contingency tables consists of complex sampling schemes obtained sample survey data. In this study we are examined diagnostics procedures detecting any outlying cell proportions and influential observations on design space in logistic regression modeltake account of the survey design effects.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.49
• /
• pp.77-87
• /
• 1999

A simple transformation of the $C^{*}$$_{pm}$, $C_{pp}$ can be regard as a process incapability index, provides an uncontaminated separation between information concerning the process accuracy and precision while this kind of information separation is not available with the $C^{*}$$_{pm}$. Recently, Kyung-seok Shin et. al. introduced an improved process incapability index $C^{*}$$_{pmk}$ by the transformation of the $C_{pmk}$. Accordingly, in this article process incapability index $C^{*}$$_{psk}$ will be proposed by the transformation of the $C_{psk}$. The motivation behind introduction of $C^{*}$$_{psk}$ is that $C_{psk}$ has failed to overcome is that it cannot distinguish process of high conforming output proportions from those of low conforming output proportions. Process incapability index $C^{*}$$_{psk}$ can identify a difference between two things by comparison on $C_{psk}$ and $C^{*}$$_{psk}$.EX>$_{psk}$.EX>$_{psk}$.

• The Journal of Fisheries Business Administration
• /
• v.52 no.3
• /
• pp.1-14
• /
• 2021

The proportions of both the fishery industry and the gross regional domestic product in the national economy are gradually decreasing. If high value-added processed fishery products suitable for regional characteristics are developed, these proportions can be improved. In pursuit of this, it is first necessary to discover processed fishery products specialized in each region and then establish a development framework for them. In this study, location coefficient was used to find processed fishery products specialized in each region. Then, dynamic shift-share analysis was used to establish a development framework which consisted of four development types of processed fishery products. Based on the magnitudes of the industrial mix effect and the regional shift effect, the supporting strategy directions were proposed for four development types of processed fishery products. The supporting strategy directions were all focused on revitalizing the local economy.

• Journal of the Korean Home Economics Association
• /
• v.2 no.1
• /
• pp.220-231
• /
• 1960