• 부모자녀건강학회지
• /
• 제19권1호
• /
• pp.25-32
• /
• 2016

Purpose: The purpose of this study was to use the social network analysis to verify the relationship between the interpersonal disposition and interactive characteristics of nursing college students. Five classes, a total of 117 nursing students were included in the study. Methods: The study interaction network centralization, density and in-degree & out-degree centrality were used as indicators for measuring students' study interaction. Also, the students' interpersonal disposition was measured using verified tool. Results: The results indicated that the ordinary type which gave and took the information generally showed the highest proportions in the study interaction network. Also, the empathic-acceptable tendency of social relation domain showed the highest proportions in the interpersonal disposition. Moreover, the students who play the isolate and the carrier role in the study interaction network had no relation with the expression tendency, and the transmitter role play students had no relation with the role tendency. Conclusion: Based on the results, the tutors should consider the students' interpersonal relationship disposition when implementing the instructional strategy in PBL curriculum.

• 한국도로학회논문집
• /
• 제14권6호
• /
• pp.1-11
• /
• 2012

PURPOSES : The purpose of the study was to examine dynamic features of concrete after mixing a little macro fiber with small aspect ratio and long length utilized for bridge, tunnel and shotcrete for tensile performance and crack control in domestic/overseas countries with cement concrete pavement mix. METHODS : Coarse aggregates with small aspect ratio and macro fibers with maximum length of approximately 32 mm are introduced in small quantities in the mix proportions of concrete pavement so as to prevent loss of the workability. Then, this study intends to evaluate the applicability of macro fibers in the mix proportions of concrete pavement by examining the basic construction performance, as well as the change of toughness, the equivalent bending strength and the flexural toughness index caused by compression, bending, tension and the flexural stress-displacement curve. RESULTS : As the results, in each kind of macro fiber, polyvinyl alcohol fiber and steel fiber displayed a good performance. CONCLUSIONS : In 0.2 and 0.3% of fiber contents, it is appeared that polyvinyl alcohol fiber has a large effect on improvement of tensile performance and steel fiber on improvement of deforming performance of bending stress.

• 한국측량학회지
• /
• 제18권1호
• /
• pp.33-40
• /
• 2000

본 연구에서는 SPOT XS데이터를 사용하여 교량위치(교량중심선, 교량폭)를 파악하고자 하였다. 이를 위하여 경계화소들의 화소내 항목혼합비를 산정한 후, 항목혼합비를 고려하여 교량중심선과 폭을 추출하는 기법을 제안 적용하였다. 인공위성 화상데이터로부터 추출된 교량위치를 국립지리원 제작의 축척 l/5,000 수치지도 및 현장측량결과와 비교ㆍ검토하였다. 비교 결과, 교량중심선의 평면 위치는 $\pm$2.9 m, 교량폭은 $\pm$4.1 m의 오차로 측정할 수 있었다.

• 한국수정란이식학회지
• /
• 제10권3호
• /
• pp.237-242
• /
• 1995

Porcine follicular oocytes matured in culture were inseminated with frozen-thawed spermatozoa. When the oocytes were inseminated in the medium with oviductal epithelial cell monolayer, the penetration rates higher in those with (4.1, 31.7, 45.1, 54.5 and 69.4%) than without cells (0, 17.1, 34.8, 45.2 and 58.9%) at 4, 8, 12, 16 and 20 h after insemination. The proportions of polyspermy in penetrated oocytes in medium with or without cells increased with time of examine. In another experiment, the penetration rate was higher without (57.6%) than with (19.6~24.1%) preincubation of spermatozoa for 1~4 h in medium. However, when the oocytes were inseminated with spermatozoa preincubated for 1~2 h, the penetration rates significantly higher (P<0.05) in those with (65.6 and 55.9% for 1 and 2 h) than without (24.1 and 20.6% for 1 and 2 h) oviductal epithelial cell monolayer. On the other hand, the proportions of polyspermy decreased with time of spermatozoa preincubation. These results indicate the significant advantages of the spermatozoa preincubation with oviductal epithelial cell monolayer for 1 and 2 h to maintain penetration potential during in vitro fertilization in the porcine.

• 한국의류학회지
• /
• 제39권2호
• /
• pp.217-232
• /
• 2015

Clothing design considers the concept of human body proportions. This paper proposes an anterior somatotype and body proportion modular by head ratio for 20s to 30s Korean males. Anterior somatotype is classified into 18-types with 13 ratios that consist of 7 heights and 6 widths divided by stature. A total of 18-types are expressed in numerical values that represent the percentage of the stature and geometrical figures represented on the grids one unit is 1% of the stature. The torso is divided by 6 modules that are side neck to shoulder, shoulder to axillary, axillary to waist, waist to navel, navel to hip, and hip to crotch. Head and leg can be estimated as numerical information of stature and torso. Morphological characteristics of anterior somatotype are analyzed by 4 factors based on results and 18-types named by simple signs. We develop a new classification of anterior somatotype that integrate vertical and horizontal characters of body proportions. The use of integrated classification in the clothing industry is expected to increase the clothing fit.

• Advances in concrete construction
• /
• 제4권2호
• /
• pp.145-160
• /
• 2016

Marble is a metamorphic rock used widely in construction which increases amount of marble powder obtained from it. Marble powder is a waste product obtained from marble during its processing. Marble waste is high in calcium oxide content which is cementing property but it creates many environmental hazards too if left in environment or in water. In this research, partial replacement of cement and sand by waste marble powder (WMP) has been investigated. Seven concrete mixtures were prepared for this investigation by partially replacing cement, sand with WMP at proportions of 0%, 10% and 15% by weight separately and in combined form. To determine compressive strength, flexural strength and split tensile strength of concrete made with waste marble powder, the samples at the curing ages of 7, 28 and 90 days was recorded. Different tests of durability were applied on samples like ultrasonic pulse wave test, absorption and sorptivity. For further investigation all the results were compared and noticed that WMP has shown good results and enhancing mechanical properties of concrete mix on partially replacing with sand and cement in set proportions. Moreover, it will solve the problem of environmental health hazard.

• Nuclear Engineering and Technology
• /
• 제49권1호
• /
• pp.224-233
• /
• 2017

In Korea, attempts have been made to develop high strength concrete for the safety and design life improvement of nuclear power plants. In this study, the cracking potentials of nuclear power plant-high strength concretes (NPP-HSCs) containing industrial by-products with W/B 0.34 and W/B 0.28, which are being reviewed for their application in the construction of containment structures, were evaluated through autogenous shrinkage, unrestrained drying shrinkage, and restrained drying shrinkage experiments. The cracking potentials of the NPP-HSCs with W/B 0.34 and W/B 0.28 were in the order of 0.34FA25 > 0.34FA25BFS25 > 0.34BFS50 > 0.34BFS65SF5 and 0.28FA25SF5 >> 0.28BFS65SF5 > 0.28BFS45SF5 > 0.28 FA20BFS25SF5, respectively. The cracking potentials of the seven mix proportions excluding 0.28FA25SF5 were lower than that of the existing nuclear power plant concrete; thus, the durability of a nuclear power plant against shrinkage cracking could be improved by applying the seven mix proportions with low cracking potentials.

• Journal of Pharmaceutical Investigation
• /
• 제19권3호
• /
• pp.145-154
• /
• 1989

Methyl methacrylate-butyl methacrylate copolymer (MMBM)-povidone (PVP) films were investigated as a potential topical drug delivery system for the controlled release of econazole nitrate as a model drug. The effect of changes in film composition, drug concentration, film thickness, pH and temperature of release medium on the in vitro release of econazole nitrate were studied. The release rate constant was found to be increased with increasing povidone content in dry films. Drug release followed zero-order kinetics in the initial stage and then release rate increased gradually with time, espicially in the films having larger proportions of PVP. The release rate was found to be dependent on drug content, film thickness, the pH and temperature of release medium. Antimicrobial test showed that microbial growth was inhibited markedly with increasing proportions of PVP in films. Also drug content and film thickness affected the antimicrobial activity.

• Macromolecular Research
• /
• 제17권11호
• /
• pp.894-900
• /
• 2009

This study examined the charge carrier photogeneration and hole transport properties of blends of poly (9-vinylcarbazole) (PVK), $\pi$-conjugated polymer, with different weight proportions (0~29.4 wt%) of (PEA)$VOPO_4{\cdot}H_2O$ (PEA: phenethylammonium cation), a novel organic-inorganic hybrid material, using IR, UV-Vis, and energy dispersive spectroscopy (EDS), thermogravimetric analysis (TGA), steady state photocurrent (SSPC) measurement, and atomic force microscopy (AFM). The SSPC measurements showed that the photocurrent of PVK was reduced by approximately three orders of magnitude by the incorporation of a small amount (~12.5 wt%) of (PEA) $VOPO_4{\cdot}H_2O$, suggesting that hole transport occurred through the PVK carbazole groups, whereas a reverse trend was observed at high proportions (>12.5 wt%) of (PEA)$VOPO_4{\cdot}H_2O$, suggesting that transport occurred via (PEA)$VOPO_4{\cdot}H_2O$ molecules. The transition to a trap-controlled hopping mechanism was explained by the difference in ionization potential and electron affinity of the two compounds as well as the formation of charge percolation threshold pathways.

• 복식문화연구
• /
• 제29권6호
• /
• pp.932-948
• /
• 2021

Tartan, the woven, checked, and wool textile considered by many to be originally from Scotland, has in fact been in use in a range of forms across numerous cultures and during various historical periods. The characteristic checked feature is due to the assembly of different coloured threads in both warp and weft directions which intersect at 90 degrees in a combination known as a sett. For well over one hundred years, different setts and thus different colour combinations have been associated closely with different geographical regions within Scotland, as well as different clans or families. Tartan-type textiles have reached popularity at various times and those have often been a predicted fashion trend suggested, for example, by contributors to fashion gatherings such as Premier Vision in Paris. Often proposed designs are best considered based on tartan combinations rather than simple reproductions. Promotional terms such as "patched checks" or "textured checks" have been common, and often these have been derived from tartan-type constructions. This paper explores novel pattern design methods by identifying the underlying grid structures and proportions exhibited by various well-known tartan setts. The possibility of pattern development from tartan grids and their manipulations is thus the focus of attention. An insight into the methodology associated with the production of original pattern designs is thus provided.