• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1113-1115
• /
• 1996

The servo system requires faster and more accurate dynamic responses. A new technique for the position control of DC servo motors is presented in this paper. The proposed technique employs a Self Tuning Regulator Proportional Integral Derivative(STR PID) position control systems in order to improve the dynamic performance of a DC servo motor. Recursive -least -squares (RLS) method is used in order to estimate the STR PID coefficients, $K_P$, $K_I$, and $K_D$. In order to consider dynamics such as voltage, angular velocity, and rotor angle, the above method was applied position control system.

• Journal of information and communication convergence engineering
• /
• v.2 no.1
• /
• pp.46-51
• /
• 2004

The problem of reducing the effect of an unknown disturbance on a dynamical system is one of the most fundamental issues in control design. We propose a robust PID (Proportional Integral Derivative) control method with neural network for improving the performance due to the rejection of an unknown disturbance. The proposed system consists of a model of the plant, a conventional PID controller and a multi-layer neural network, and is composed of two loop; the first loop enables the system to achieve stability of system, the second loop rejects an unknown disturbance. Simulation and experiment results show that the proposed method improves considerably on the performance of the conventional PID control method and the typical IMC method using neural network.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.439-440
• /
• 2023

본 논문에서는 차량의 상태를 실시간으로 모니터링하고, 중요한 정보를 운전자에게 효과적으로 제공하는 시스템을 제안한다. 본 논문에서 개발한 차량 운행 정보시스템은 블루투스 OBD2 커넥터를 통해 차량의 PID 값을 식별 및 수집하고, 이를 라즈베리파이와 7인치 터치 디스플레이를 이용하여 운전자에게 한눈에 보일 수 있는 형태로 정보를 제공한다. 수집된 데이터는 실시간으로 SD 카드에 저장되며, 차량에 이상이 생겼거나 사고가 발생했을 때, 이를 입증하기 위한 참고자료로 활용될 수 있을 것으로 기대된다.

• Korean Journal of Agricultural Science
• /
• v.47 no.1
• /
• pp.43-58
• /
• 2020

Mulching plastic is used for the purpose of maintaining soil temperature, moisture, and weed and pest prevention in agriculture. Any remaining plastic after use may contaminate the soil and damage crop growth. To solve this problem, mulching plastic wrappers have been studied and developed, but the actual use rate is quite low due to their poor performance and frequent tearing of the plastic on the field. In this study, we developed a tractor attachable mulching plastic wrapper to minimize the tearing of the mulched plastic. The developed mulching plastic wrapper consists of hydraulic motors and pumps, valves, a microcontroller, and sensors. The collecting speed of the plastic mulch was calculated considering the tractor's travel speed and the radius of the collecting drum. A proportional controller was designed to control the rotating speed of the hydraulic motor as the plastic was wound around the collection drum and the radius increased. The performance of an indoor experiment was quite promising because the difference between the collecting speed predicted by the calculation and the actual collecting speed was 2.71 rpm. Based on a field verification test, the speed difference was max. 14.28 rpm; thus, the, proportional integral derivative (PID) controller needs to be considered to control the drum speed precisely. Another issue was found when the soil covered at the edge of the plastic was hardened or the road surface was uneven, the speed control was unstable, and the plastic was torn. In future research, vibrational plows will be equipped to break-up the harden soil for collecting the plastic smoothly.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.6
• /
• pp.297-304
• /
• 2014

Due to the nonlinearity and complexity of the three-phase photovoltaic inverter, we propose an intelligent control based on fuzzy logic and the classical proportional-integral-derivative. The feedback linearization method is applied to cancel the nonlinearities, and transform the dynamic system into a simple and linear subsystem. The system is transformed from abc frame to dq0 synchronous frame, to simplify the state feedback linearization law, and make the close-loop dynamics in the equivalent linear model. The controls improve the dynamic response, efficiency and stability of the three-phase photovoltaic grid system, under variable temperature, solar intensity, and load. The intelligent control of the nonlinear characteristic of the photovoltaic automatically varies the coefficients $K_p$, $K_i$, and $K_d$ under variable temperature and irradiation, and eliminates the oscillation. The simulation results show the advantages of the proposed intelligent control in terms of the correctness, stability, and maintenance of its response, which from many aspects is better than that of the PID controller.

• Structural Engineering and Mechanics
• /
• v.81 no.5
• /
• pp.633-645
• /
• 2022

The active tuned mass damper (ATMD) is an efficient and reliable structural control system for mitigating the dynamic response of structures. The inertial force that an ATMD exerts on a structure to attenuate its otherwise large kinetic energy and undesirable vibrations and displacements is proportional to its excursion. Achieving a balance between the inertial force and excursion requires a control law or feedback mechanism. This study presents a technique for the optimum design of a sliding mode controller (SMC) as the control law for ATMD-equipped structures subjected to earthquakes. The technique includes optimizing an SMC under an artificial earthquake followed by testing its performance under real earthquakes. The SMC of a real 11-story shear building is optimized to demonstrate the technique, and its performance in mitigating the displacements of the building under benchmark near- and far-fault earthquakes is compared against that of a few other techniques (proportional-integral-derivative [PID], linear-quadratic regulator [LQR], and fuzzy logic control [FLC]). Results indicate that the optimum SMC outperforms PID and LQR and exhibits performance comparable to that of FLC in reducing displacements.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.3
• /
• pp.355-367
• /
• 2007

This paper proposes a design method of the PI(Proportional-Integral)+D(Derivative) controller using self-tuning of the design variables and controller gains. The used fuzzy PI+D controller is the approximated conventional continuos time linear PI+D controller and the used fuzzification method is the fuzzy single tone and the adapted defuzzification method is the simplified tenter of gravity. Fuzzy estimation result would be calculated in the other function elements from the classified fuzzy variables and the result determined by the design variables decides the controller gains. As a result, the proposed method shows the capability of the high speed tuning and can be applied to the case of input variables with many fuzzy partitions and also can bring out the advantage to reduce the reconstruction(digital sampling reconstruction) error. Most simulation results show that this controller makes much bettor efficiency and improvement by using design variables and controller gains.

• Earthquakes and Structures
• /
• v.20 no.3
• /
• pp.353-364
• /
• 2021

Natural hazards like earthquakes, high winds, and tsunami are a threat all the time for multi-story structures. The environmental forces cannot be clogged but the structures can be prevented from these natural hazards by using protective systems. The structural control can be achieved by using protective systems like the passive, active, semi-active, and hybrid protective systems; but the semi-active protective system has gained importance because of its adaptability to the active systems and reliability of the passive systems. Therefore, a semi-active protective system for the earthquake forces has been adopted in this work. Magneto-Rheological (MR) damper is used in the structure as a semi-active protective system; which is connected to the current driver and proposed controller. The Proportional Integral Derivative (PID) controller and reliable PID controller are two proposed controllers, which will actuate the MR damper and the desired force is generated to mitigate the vibration of the structural response subjected to the earthquake. PID controller and reliable PID controller are designed and tuned using Ziegler-Nichols tuning technique along with the MR damper simulated in Simulink toolbox and MATLAB to obtain the reduced vibration in a three-story benchmark structure. The earthquake is considered to be uncertain; where the proposed control algorithm works well during the presence of earthquake; this paper considers robustness to provide satisfactory resilience against this uncertainty. In this work, two different earthquakes are considered like El-Centro and Northridge earthquakes for simulation with different controllers. In this paper performances of the structure with and without two controllers are compared and results are discussed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.1
• /
• pp.1-12
• /
• 1999

A design and DSP-based implementation of robust nonlinear speed control of a permanent magnet synchronous motor(PMSM) under the unknown parameter variations and speed measurement error is presented. The model reference adaptive system(MRAS) based adaptation mechanisms for the estimation of slowly varying parameters are derived using the MIT rule. For the disturbances or quickly varying parameters, a quasilinearized and decoupled model which includes the influence of parameter variations and speed measurement error on the nonlinear speed control of a PMSM is derived. Based on this model, a boundary layer integral sliding mode controller to improve the robustness and performance of the nonlinear speed control of a PMSM is designed and compared with the conventional controller which employs Proportional plus Derivative(PD) control. To show the validity of the proposed scheme, simulations and DSP-based experimental works are carried out and compared with the conventional control scheme.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.1242-1244
• /
• 1992

This Paper deals with a Auto-Tuning Fuzzy PID Controller used in real time and its application for induction motor. The control strategy of the controller is able to develop and improve automatically. The new Auto-Tuning Fuzzy PID Control algorithm which modifies the fuzzy control decision table is presented in this paper. It can automatically refine an initial approximate set of fuzzy rules. The possibility of applying fuzzy algorithms in faster response, and more accurate was compared with other industrial processes, such as AC Motor driver. The performance of Proportional_Integral Derivative(PID) control and this fuzzy controllers is compared in terms of steady_state error, settling time, and response time. And then, Limitations of fuzzy control algorithms are also described.