• 한국주거학회논문집
• /
• 제17권3호
• /
• pp.61-69
• /
• 2006

Vertical vibrations on the slab of buildings are affected by types of vibration sources, transfer paths, and the material property and the size of members. Among these parameters, the vibration sources and the transfer path can not be controlled, but the property and the size of members can be controlled in the phase of design the members. In this study, the vibration responses according to the property and size of members were obtained by using a prediction program based on dynamic-stiffness matrix. Three parameters which are not usually considered as major factors for architecral planning were selected fur these analyses. They are the strength of materials, the thickness of wall and the thickness of slab. The ground vibration source located near a building was used as vibration input data in the analyses. This study has its originality on presenting appropriate property and size of structural members in order to reduce vertical vibration of slab in shear-wall structures. Analysing the results from the vibration estimation program according to the variations of parameters, the appropriate ratio among the sizes of structural members were proposed. From these results, the vibration level on the slab which is not constructed yet would be predicted and the vibration peak level can be reduced or shifted into the desirable frequency range. Therefore, the vertical vibration could be controlled in the phase of designing buildings.

• 한국공간구조학회논문집
• /
• 제18권4호
• /
• pp.23-30
• /
• 2018

The purpose of this study is to evaluate the structural safety of cultural altar since its bearing capacity has been questioned due to weathering damages and sectional defections. This evaluation process consists two stages; which the first is field investigation and the second is structural modeling and analysis. Based on field investigation, all of the structural members supporting the altar were carefully examined and all the findings were accounted for the development of the structural modeling using the Midas computer program. Using a 3D scanner, the weight of the Buddha statue was applied to the structural modeling. Then, according to the allowable stress design method of KBC2016, the structural safety was evaluated. Based on this result, replacements of several structural members were recommended to increase the structural safety and value of cultural property.

• 대한조선학회논문집
• /
• 제47권4호
• /
• pp.598-605
• /
• 2010

The structural design of oil tankers and bulk carriers should be performed based on the Common Structural Rules(CSR) which were recently established by the International Association Classification Societies(IACS). At first, in the structural design viewpoint, the scantling and hullweight based on the CSR should be compared with those of existing rules, and then a minimum weight/cost design should be performed by considering the variation of the number of web and the material property. In this study, the optimum web space and material property will be proposed by performing a minimum weight/cost design of a large oil tanker, and the results will be compared with those of existing ship. The longitudinal members are determined by SeaTrust-Holdan developed by the Korean Register of Shipping(KR), and the transverse members are determined by NASTRAN and PULS.

• Composites Research
• /
• 제29권6호
• /
• pp.328-335
• /
• 2016

이 연구의 목적은 석회석 미분말을 사용하여 복합재료의 연성이 향상된 시멘트계 매트릭스 섬유복합재료(ECC)를 개발하고 이 재료로 제작된 구조부재의 휨성능을 평가하는 것이다. 재료 개발을 위하여 4가지 종류의 배합을 마이크로역학과 안정상태 균열 이론을 활용하였고, 이를 위하여 시멘트계 매트릭스의 파괴인성과 섬유-시멘트 매트릭스 경계면 특성을 파악하였다. 개발된 ECC의 1축 인장변형특성과 압축강도 특성이 실험적으로 평가되었다. 또한, 2개의 구조부재를 제작하여 휨실험을 수행하였고 그 결과를 재래식 콘크리트 구조부재의 성능과 비교하였다. 재료실험 결과로 석회석 미분말의 혼입률 증가에 따라 압축강도는 감소하지만 연성은 증가하였다. 부재 실험 결과, ECC 구조부재는 재래식 콘크리트 구조부재에 비하여 높은 휨연성, 높은 휨내력, 작은 균열폭을 나타내었다.

• 한국해양공학회지
• /
• 제34권6호
• /
• pp.481-488
• /
• 2020

Composite materialsuch as glass-fiber reinforced plastic and carbon-fiber reinforced plastic (CFRP) shows anisotropic property and have been widely used for structural members and outfitings of ships. The structural safety of composite structures has been generally evaluated via finite element analysis. This paper presents a technique for updating the finite element model of anisotropic beams or plates via natural frequencies. The finite element model updates involved a compensation process of anisotropic material properties, such as the elastic and shear moduli of orthotropic structural members. The technique adopted was based on a discrete genetic algorithm, which is an optimization technique. The cost function was adopted to assess the optimization problem, which consisted of the calculated and referenced low-order natural frequencies for the target structure. The optimization process was implemented with MATLAB, which includes the finite element updates and the corresponding natural frequency calculations with MSC/NASTRAN. Material properties of a virtual cantilevered orthotropic beam were estimated to verify the presented method and the results obtained were compared with the reference values. Furthermore, the technique was applied to a cantilevered CFRP beam to successfully estimate the unknown material properties.

• Steel and Composite Structures
• /
• 제17권1호
• /
• pp.105-121
• /
• 2014

A fundamental limitation of steel structures is the decrease in their load-bearing capacity at high temperatures in fire situations such that structural members may require some additional treatment for fire resistance. In this regard, this paper evaluates the structural stability of fire-resistant steel, introduced in the late 1999s, through tensile coupon tests and proposes some experimental equations for the yield stress, the elastic modulus, and specific heat. The surface temperature, deflection, and maximum stress of fire-resistant steel H-section columns were calculated using their own mechanical and thermal properties. According to a comparison of mechanical properties between fire-resistant steel and Eurocode 3, the former outperformed the latter, and based on a comparison of structural performance between fire-resistant steel and ordinary structural steel of equivalent mechanical properties at room temperature, the former had greater structural stability than the latter through $900^{\circ}C$.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.29-34
• /
• 2006

In general, the vertical vibration problems for .strength of members and serviceability of building structures are not considered in structural design process, but the prediction of the vertical vibration is very important and essential to structural design process. This study aims to investigate the characteristics of vertical vibration in terms of the transfer of horizontal directions on the rahmen building structures. In order to examine the characteristics of vertical vibration, the modal test and the impact (heel-drop and hammer) excitation experiments were conducted several times on three building structures. The results from the experiments are analyzed and compared. with the results. The results of this study suggest that the characteristics of vertical vibration transfer in horizontal way are effected from the fundamental frequency of the slabs and excitation forces.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.473-480
• /
• 2003

In these days, The base isolation system is often used improve the seismic capacity of the structure Instead of conventional techniques of strengthening the structural members. The purpose of this study is to evaluate dynamic property evaluation of control equipment using Lead Rubber Bearing. In this study, analysis numerical was performed to determine the optimal dynamic property of lead rubber bearing and damper which minimize the response of base from in main control room. Also the analytical results was composed with the test results peformed in previous study

• 한국전산구조공학회논문집
• /
• 제17권2호
• /
• pp.215-222
• /
• 2004

재분배기법을 이용한 변위조절설계법이 고층건물의 실용적인 변위제어 기법으로 제안되고 있다. 현재까지 대부분의 재분배기법을 이용한 변위조절설계법은 일률적으로 단면적을 설계변수로 사용하고 있으나, 부재 특성에 따라 지배적인 부재력이 다르므로 부재적 특성을 고려하여 설계변수를 선택할 필요가 있다. 그러므로 본 연구에서는 부재별로 부재력 특성을 고려한 설계변수를 사용한 변위조절설계법을 제안하고 이를 20층 강접골조-전단벽 구조물의 변위조절설계에 적용하여 기존의 단면적을 설계변수로 사용한 변위조절설계법과 비교 평가하였다. 적용 결과, 부재 특성을 고려한 변위조설설계법이 부재별로 지배적인 부재력에 해당하는 부재 단면성능을 설계변수로하여 부재별 변위기여도를 직접 조절하므로 물량 및 변위 예측의 정확도 측면에서 비슷하거나 더 우수함을 알 수 있었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.299-306
• /
• 2000

The elastic critical load of a slender compression member plays an important role when the proper design of that member is required. For tapered compression members, however, there are cases when the conventional neutral equilibrium or energy method can't be applied to the determination of critical loads. In this paper, the finite element method is applied to the approximate determination of the linearly tapered members. In this paper, the bars are assumed to be tapered linearly along their axes. The parameters considered in this study are taper parameter, α and the sectional property parameter, m. The member ends are either hinged or fixed. The computed results using the finite element method are represented in the forms of algebraic equations. The regression technique is employed to determine the coefficients of the algebraic equations. Critical loads estimated by the proposed algebraic equations coincide flirty well with those employing the finite element method.