• 한국토양비료학회지
• /
• 제44권4호
• /
• pp.545-550
• /
• 2011

Urea intercalated into montmorillonite (MT) exhibits remarkably enhanced N use efficiency, maintaining its fast effectiveness. This study dealt with the release property of urea from metal-urea-clay hybrid with MT (MUCH) under continuous-flow conditions and the cumulative impacts of its successive application on physicochemical properties of soils. Releases of urea were completed within 4 hrs under continuous-flow condition regardless of the types and the leaching solutions. However, urea release property was significantly affected by both the form of fertilizer and the presence of electrolytes in solution. The fast release property of urea from MUCH in continuous-flow condition was not significantly affected by soil properties such as soil pH and soil texture. In addition, its successive application did not lead to any noticeable change in soil physicochemical properties, water stable aggregate rate, water holding capacity and cation exchange capacity in both sandy loam and clay loam soils. Therefore, this study strongly supported that urea intercalated into MT could be applied as fast-effective N fertilizer, in particular for additional N supply.

• 한국의상디자인학회지
• /
• 제21권4호
• /
• pp.17-26
• /
• 2019

This research aims to obtain useful data on the development of compression garment products with high-stretch knitted materials. Using nylon SCY, four specimens were knitted. Then, appearance (width, length, weight, thickness), stretch property (stretch, recovery) and clothing pressure were measured and their interrelation was analyzed. In the comparison of appearance features, yarn floating caused shrinkage in both course and wale directions of the specimens. Yarn overlapping by tucking caused a release in the course direction and shrinkage in the wale direction. Also, structural change was affected by the weight and thickness change of the knitted fabric. In the analysis of fabric stretch, yarn floating reduced the extension in course direction and increased that in wale direction of the knitted fabric. However, yarn overlapping reduced the elongation in both directions. In the analysis of recovery, yarn floating and overlapping raised fabric recovery in both directions, and tuck structure was superior to float in recovery. In the analysis of clothing pressure, 'Plain-Float' structured fabrics showed a higher clothing pressure than 'Plain' and the clothing pressure value of 'Plain-Tuck' was lower than that of 'Plain'. As for the correlation between fabric appearance, stretch property, and clothing pressure, the appearance change in course direction had a major influence on the clothing pressure. The shrinkage of appearance led to a decrease in stretch and an increase in clothing pressure.

• 한국항공우주학회지
• /
• 제43권2호
• /
• pp.149-155
• /
• 2015

기존의 MEMS 기반 루버 및 셔터 개폐형 가변 방사율 라디에이터는 온도 조건에 따라 방사율이 가변되어 효율적인 열 제어가 가능하나 발사 환경에서의 기계적 구동부의 취약점과 변경된 방사율 유지를 위해 지속적인 전력 소모가 요구되는 단점을 갖는다. 본 연구에서 제안한 MEMS 기반 가변 방사율 라디에이터는 대전되는 비드를 사용하여 전극의 극성 변화에 따라 방사율 가변이 가능하기 때문에 상기의 문제점을 극복할 수 있다. 본 연구에서는 MEMS 기반 가변 방사율 라디에이터의 광학 물성치 최적화 설계를 수행하였으며, 고정 방사율 라디에이터와의 비교를 통해 MEMS 기반 가변 방사율 라디에이터의 유효성을 입증하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.533-538
• /
• 2003

It has been shown that ion implantation produces remarkable improvements in surface-sensitive physical and chemical properties as well as other mechanical properties, in polymers. In this study, ion implantation was performed onto polymer, PC(polycarbonate), in order to investigate surface hydrophilic property through contact angle measurement using distilled water. PC was irradiated with N, Ar, Xe ions at the irradiation energy of $20\;{\sim}\;50keV$ and the dose range of $5{\times}10^{15},\;1{\times}10^{16},\;7{\times}10^{16}\;ions/cm^2$. The contact angle of water has been reduced with increasing fluence and ion mass but increased with increasing implanted energy. The changes of chemical and structural property are discussed in view of infrared spectroscopy and FT-IR, XPS, which shows increasing C-O bonding and C-C bonding. The root mean square of surface roughness examined by means of AFM changed smoothly from 0.387nm to 0.207nm and the change of wettability was discussed with respect to elastic and inelastic collisions obtained as results of TRIM simulation. It was found that wettability of the modified PC surface was affected on change of functional group and nuclear stopping or linear energy transfer(LET, energy deposited per unit track length per ion) that causes chain scission by displacing atom from polymer chains, but was not greatly dependant on surface morphology.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권6호
• /
• pp.962-971
• /
• 2004

This paper has dealt with thermo-physical properties of microencapsulated phase change material slurry as a latent heat storage material having a low melting point. The measured results of the thermo-physical properties of the test microencapsulated phase change material slurry, those are, density, specific heat, thermal conductivity and viscosity, were discussed for the temperature region of solid and liquid phases of the dispersion material (paraffin). The measurements of these properties of microencapsulated phase change material slurry have been carried out by using a specific-gravity meter, a water calorimeter, a differential scanning calorimeter(DSC), a transient hot wire method and rotating type viscometer, respectively. It was clarified that the additional properties law could be applied to the estimation of the density and specific heat of microencapsulated phase change material slurry and also the Euckens equation could be applied to the estimation of the thermal conductivity of this slurry.

• 한국지반공학회논문집
• /
• 제20권6호
• /
• pp.61-73
• /
• 2004

일반 자연 점토지반의 투수계수는 다양한 응력수준에 따라 비선형적인 특성을 보이며, 이러한 지반 투수계수의 비선형성은 상재하중 재하시 지반의 압밀시간 및 지반 변형 특성에 영향을 주게 된다. 따라서, 본 연구에서는 지반의 비선형 투수계수의 영향성을 고찰하기 위해 수정 Cam-clay 모델과 Biot의 압밀이론을 접목한 연립이론(Coupled theory)을 이용하여 FEM 수치해석을 실시하였다. 검토 결과 비선형 투수성은 비선형 특성을 나타내는 투수계수 변화비와 전체 간극비에 대한 평균 투수계수의 크기에 따라 지반 변형과 지중 과잉간극수압에 미치는 영향성이 상이하게 나타났다. 따라서, 보다 현장에 근접한 해석을 실시하기 위해서는 지반 투수계수의 변화비와 평균 투수계수의 크기에 따라 투수계수의 비선형 특성을 고려해야할 것인지를 판단해야 할 것이다.

• 한국중재학회지:중재연구
• /
• 제12권2호
• /
• pp.373-418
• /
• 2003

This is to study intellectual property(IP) protection of contents which is related with transactions upon internet network. Issues of electronic transaction and infringement cases were studied and analyzed for intellectual property protection. Upon those study, utilization and activation of contents, dispute settlement and method of IP protection were suggested. To achieve this study purpose, it consists of 5 chapters. In chapter 1 introduction, it's mentioned purpose, scope, and method of this study. In chapter 2, outline of contents and e-Commerce, and subject of IP protection upon internet were studied. In chapter 3, issues and dispute factors of IP were discussed and infringement cases were analyzed. It found out that infringements would be variety and complex due to technology rapidly changes. In chapter 4, IP protection plan and responsibility of webmaster were studied and emphasized to protect IP upon Internet. Also, protection against infringement and method of dispute resolution were studied and suggested the method. In this study, the protection plan was suggested because IP protection of contents in internet would be many cases upon internet technology. It found out that technology was important for business expansion of contents, e-Commerce and IP protection, and to enact a law related with IP. In chapter 5 conclusion, this study was summarized and further research was suggested. This study results are 1. IP related laws had better enact or revise to meet internet technology changes for IP protection timely, 2. local laws are to change and develop to harmony with international norm and trends, 3. consolidation of IP related laws for unification of IP statement should be incurred to avoid unnecessary energy of legislation and not to create dispute matters. That's also for customer satisfaction. In conclusion, not to incur ADR and for IP protection of contents, IP related laws would be promptly made or revised, according to technology change trends and for international harmony, That's for internet related industry development and customer satisfaction.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.50-53
• /
• 1995

In this paper we have obtained property by considering the change of optical energy gap as a function of photo-does for exposing photo on Ag/a-Se$\sub$75/Ge$\sub$25/ thin films. This U-type property was obsered for all photo-exposing except for blu-pass filtered Hg lamep. Expecially, very large band shift(~0.3[eV]) is obtained by exposing He-Ne laser (6328[${\AA}$]). It is impossible to explain this property for exposing He-Ne and semiconductor laser through DWP model, which was explained for photo-exposing above the energy gap. Therefore we suggest a new modified model of DWP model for Ag/a-Se$\sub$75/Ge$\sub$25/ bilayer thin films.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.51-54
• /
• 2003

Internal defects such as chevron crack occasionally occur in the process of cold extrusion or cold drawing. It is known that the existence and property of inclusion greatly influences the generation of the internal crack. However, in the plastic working field, research about the effect of the inclusion on the fracture is not theoretically analyzed. This paper describes effects of the physical property of inclusion on the internal fracture generation in the process. Prediction of fracture was evaluated by critical damage value calculated by the equation of Cockcroft & Latham and its change by the inclusion physical property such as size and stiffness was investigated.

• 한국세라믹학회지
• /
• 제36권9호
• /
• pp.991-996
• /
• 1999

Effect of solution property on the weight varation and microstructural change of film was studied by electrophoretic deposition in order to obtain a homogeneous and dense zirconia film. As a result of weight kinetics of film which obtained in alcohol or aqueous solution having different polarity experimental data showed large deviation from theoretical ones calculated by Zhang's kinetic model. It had been shown that the weight affecting factors was largely dependent on properties other than dielectric constant and viscosity of solvent zeta potential appiled field and time. In initial stage a main factor of the drastic weight increase was the capillary drag of porous substrate. The cause of weight decrease with time in aqueous solution after 300 s was attributed to the defect of film by sagging and electrolytic reaction. The electrolyte film which prepared in alcohol solution with good wetting for substrate had better homogeneous and dense microstructure than one in aqueous solution with high surface tension.