• 제목/요약/키워드: property change

검색결과 1,970건 처리시간 0.029초

ERF를 이용한 유압제어밸브의 특성실험 (Characteristic Experiment of a Hydraulic Control Valve by Using Electro-Rheological Fluid)

  • 김동수;박재범;장성철
    • 연구논문집
    • /
    • 통권30호
    • /
    • pp.93-99
    • /
    • 2000
  • Electro-Rheological(ER) fluids change their apparent viscosity according to the electric field strength. The electrical and rheological properties of zeolite based the ER fluids were reported. The electric field dependent yield stress are obtained from experimental investigation on the Bingham property of the ER fluid. Using ER fluids, it is possible to directly interface between electric drop and flow rate of the ER fluid was hydraulic control valve measured under application of an electric field. The purpose of the present study is pressure drop measurement of an ER valve by using strain gage. The performance characteristics of the valve system are evalusted in terms of pressrue fixed with respect to the intensity of employed electric fields and flow rates. As a result, it is esperimentally confirmed that pressure control valve using ER fluids applicable to use in hydraulic power systems.

  • PDF

소결체와 저탄소강의 레이저용접시 생성되는 캐비티의 형성과 용접 특성에 대한 연구 (A Study on the Formation of Cavity and Welding Property in the Laser Welding Fusion Zone between Sintered Segment and Mild Steel Shank)

  • 조남준;정우광;김성욱;이창희;김승대
    • 한국재료학회지
    • /
    • 제14권4호
    • /
    • pp.300-306
    • /
    • 2004
  • A laser welding has been made between sintered tip of Fe-Co-W and low carbon steel shank for the diamond saw blade. The welding characteristics and formation of defect has been investigated carefully for the weld fusion zone in different welding condition. Full penetration has been observed for the whole range of heat input investigated in the present work. Bead width and under-fill have been increased with the increase of heat input. With increasing of heat input small cavities were decreased while large cavities were increased. The ratio of total cavity area to the entire weld bead area was not changed significantly with change of heat input. Most of cavities were found near the tip, and supposed to be formed from the pore in the tip.

고주파 유도가열된 조선용 강판의 기계적 특성 연구 (A Study on the Mechanical Properties of Heated Plates by Induction Heating System)

  • 현충민;이명수;조시훈;장태원
    • Journal of Welding and Joining
    • /
    • 제32권1호
    • /
    • pp.47-52
    • /
    • 2014
  • Due to of high intensity, lower noise and easy controllability of the heat, induction heating system became well known. Induction heating method has been suggested as substitute for the gas heat source and adopted in the automation of curved hull forming system. In this study, an investigation was accomplished to find the effects on the change of material properties when the induction heating was applied on the mild steel plate. Plates were heated using weaving method to get sufficiently heat affected zone and then cooled with water or in the air. The mechanical properties of the heated plate were evaluated. As results, the tensile test, impact test and microstructures satisfied the class rule.

A Study on Property Change with Mixing Ratio in NBR/PVC Composites

  • Li, Xiang Xu;Jeong, Hyung Seok;Cho, Ur Ryong
    • Elastomers and Composites
    • /
    • 제53권2호
    • /
    • pp.48-51
    • /
    • 2018
  • 10, 20, 30, and 40% of polyvinyl chloride (PVC) were added to nitrile butadiene rubber (NBR) to modify the latter. The NBR/PVC composites containing pure NBR were synthesized to investigate properties, such as crosslinking density, hardness, tensile strength, abrasion resistance, heat resistance, solvent resistance, and filler dispersion. The experimental result revealed a decrease in crosslinking density and heat resistance with increase in the PVC content. In contrast, addition of PVC to NBR resulted in enhancement of hardness, tensile strength, solvent resistance, and filler dispersion.

Effect of Metal Oxide on the Superconductivity of YBCO

  • Lee, Sang-Heon
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
    • /
    • pp.1241-1242
    • /
    • 2006
  • Electromagnetic properties of $CeO_2$ doped and undoped YBaCuO superconductors were evaluated to investigate the effect of pinning center on the magnetization and magnetic shielding. The variation $\DeltaM$ with doping was maximum for 3% doping and decrease with further doping. The magnetic shielding was evaluated by measuring the induced voltage in secondary coil and the voltage initially set to 0.5V, decreased to 0.17V and 0.28V respectively for the undoped and 3% $CeO_2$ doped sample. The much less change in the induced voltage for the 3% doped sample is attributed to the increased flux shielding by shielding vortex current. The $CeO_2$ was converted to fine $BaCeO_3$ particles which were trapped in YBaCuO superconductor during the reaction sintering. The trapped fine particles, $BaCeO_3$ may be acted as a flux pinning center.

  • PDF

이종 액세스 네트워크 구조에서 자원관리 방안 (A Resource Management Scheme in Heterogeneous Access Network Architectures)

  • 박상준
    • 한국시뮬레이션학회논문지
    • /
    • 제14권2호
    • /
    • pp.83-92
    • /
    • 2005
  • Access networks connected in B3G networks provide its property network service. Hence, though mobile users may utilize only a network service from an access network, they can also use variety of network services from several access networks for their service satisfaction. To support heterogeneous changeable network service in access networks, the mobile terminal must implement heterogeneous system techniques so that it is able to change the network service by ISHO (Inter-System Handover) In this paper, we present the ISHO condition by the policy-based framework in B3G networks. Also, we propose an ISHO scheme to control network resources for the QoS management of a mobile session between UMTS and WLAN access networks. To support the QoS management, the proposed scheme is that it will be implemented before the resource exhaustion occurs to effect network performances.

  • PDF

신경회로망을 이용한 가변 구조 제어 시스템의 구현 (Implementations of the variable structure control system using neural networks)

  • 양오;양해원
    • 전자공학회논문지B
    • /
    • 제33B권8호
    • /
    • pp.124-133
    • /
    • 1996
  • This paper presents the implementation of variable structure control system for a linear or nonlinear system using neural networks. The overall control system consists of neural network controller and a reaching mode controller. While the former approximates the equivalent control input on the sliding surface, the latter is used to bring the entire system trajectories toward the sliding surface. No supervised learning procedures are needed and the weights of the neural network are tuned on-line automatically. The neural netowrk-based variable structure control system is applied to a nonlinare unstable inverted pendulum system through computer simulations, and implemented using a microcomputer (80486-50MHz) and applied to the DC servomotor position control system. Simulation and experimental results show the expected approximation sliding property is occurred. The proposed controller is compared with a PID controller and shows better performance than the PID controller in abrupt plant parameter change.

  • PDF

지상무기체계에서의 외란측정을 이용한 정밀 지향성 향상 연구 (A Study on Improvement of Aiming Ability using Disturbance Measurement in the Ground Military Vehicle)

  • 유진호;박병훈
    • 한국군사과학기술학회지
    • /
    • 제10권2호
    • /
    • pp.12-20
    • /
    • 2007
  • The aiming ability is a key to improve the accuracy performance of the gun pointing system in the ground military vehicle. This paper describes the new detection method of chatter vibration using disturbance acceleration in the pointing structure. In order to analysis the vibration trends of the pointing system occurred while the vehicle driving, acceleration data obtained from vehicle was processed by using data processing algorithm with moving average and Hilbert transform. The specific mode constants of acceleration were obtained from various disturbances. Vehicle velocity, road condition and property of pointing structure were considered as factors which make the change of vibration trend in vehicle dynamics. Finally, back propagation neural networks have been applied to the pattern recognition of the classification of vibration signal in various driving conditions. Results of signal processing were compared with other condition result and analysed.

이방성 복합재료 판에서의 램파 방정식 (The Lamb Wave Equation in a Composite Plate with Anisotropy)

  • 이상호
    • 한국군사과학기술학회지
    • /
    • 제13권1호
    • /
    • pp.126-132
    • /
    • 2010
  • A Lamb wave guided by a plate structure has dispersive characteristics because phase and group velocity change with the variation of frequency and thickness. The Lamb wave has two modes, symmetric and anti-symmetric mode, which propagates symmetrically and non-symmetrically with respect to centerline. In this paper, the derivation of Lamb wave equation with anisotropic material property is investigated. The phase velocity and group velocity dispersion curves are shown using the stiffness matrix of composite materials with the variation of angle.

네덜란드 구조주의 건축의 실내공간 특성에 관한 연구 (A Study on the Interior Architectural Characteristic of Dutch Structuralism)

  • 정미현;김문덕
    • 한국실내디자인학회:학술대회논문집
    • /
    • 한국실내디자인학회 2001년도 춘계학술발표대회 논문집
    • /
    • pp.64-68
    • /
    • 2001
  • As Dutch structuralism discovered a possibility that can improve the problem of modem architecture through study on non-western area. Dutch structuralism had tremendous impact on Philosophy, psychology, art history and the style of a dress and many other cultural trend. In architecture, Aldo van Eyck embodied that theory and succeeded to Herman Hertzberger and Piet Blom. As result Structuralism related with architecture has dealt with the participation and domain of residents, namely public domain and private domain, the approach property of public space, middle domain which shows the harmony between public domain and private one, and the structuralism discovered that each element of public space and private space has been developed as an architectural type that makes a group by repetitive arrangement and it found out a possibility that can make up problems overlooked in modem architecture through development and change.

  • PDF