• 한국세라믹학회지
• /
• 제29권11호
• /
• pp.855-862
• /
• 1992

Thermoelectric power, electrical conductivity and Hall effect were measured, as functions of temperature in the range of 100 to 600 K, on polycrystalline Bi4/3Sb2/3Te3 which had been prepared via uniaxial hot-pressing at different temperatures in the range of 373 K to 773 K, aiming at searching a profitable processing route to a polycrystalline thermoelectric material, a promising, viable alternative to a single crystalline one. It was found that, with increasing temperature of pressing under a fixed pressure, the material, normally a p-type prior to being hot-pressed, underwent a transition to n-type. This transition was confirmed to be due to plastic deformation during hot-pressing and interpreted as being attributed to the change of the major ionic defect BiTe' into TeBi˙at temperature high enough for structure elements mobility. Thermoelectric figure-of-merit of the hot-pressed material was discussed in connection with the p-n transition in addition to microstructure.

• 대한가정학회지
• /
• 제35권1호
• /
• pp.257-262
• /
• 1997

In this thesis considering the problems shown in the usage of interlining of clothes and in the process of sewing the breaking away strength which is meant by adhesion is analysed by experimennt in which Polyamide content is dealed with at the 5 level to raise the adhesive strength by using the one-sided non woven adhesive interlining made in this country as the samples. After examing the optimum in the process of Cotton and polyester fabrics and adhered fabrics practical for blouse and jacket and analysing the breaking away strength the wanted property of matter and the change with the repeated laundry We reach at the following results. 1. The adhesive strength of the two adhered fabrics were strongly appeared in order of cotton>polyester. 2. The order of the breaking away strength by the interlinings of adhesive fabrics was A5> A4> A3> A2> A1. 3. The breaking away strength of the two adhered fabrics was weakened by the repeated laundry and the breaking away phenomena were fewer under the most suitable conditions than the various conditions.

• 대한치과보철학회지
• /
• 제40권3호
• /
• pp.269-274
• /
• 2002

statement of problem The viscoelastic property is the most important and peculiar characteristics of soft liners. But the authorized standard is not certainly established than other dental materials. purpose of study This study is aimed to compare the initial flow of gelation of the modified soft liner with 4-META with that of PMMA soft liners using dynamic method and evaluate the clinical acceptance of the trial materials. materials and method This study consists of 3 groups with the given % of 4-META powder in the Coe soft liquid; 0%, 5%, 10% Each group was tested for 10 times to record the change of G′values during 3 hours. the gelation time was recorded by the oscillating rheometer with parallel plate with 1 rad/sec. results As the results of this study, the gelation time of modified soft liner was elongated by 5 to 6 minutes. conclusion The mean gelation time of modified soft liner could be within the range of clinically acceptable.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.37-41
• /
• 2005

The curing of thermoset resin is accompanied with the changes in chemical and physical properties. The cure monitoring techniques can be designed by tracing these property changes. This paper presents the cure monitoring technique with fiber optic sensors to detect the change of refractive index during the polymerization process of engineering epoxy resin. The fiber optic sensor system was developed to measure the reflection coefficient at the interface between the fiber optic and the resin. The correlation between the sensor output and the degree of cure was performed following Lorentz-Lorenz law. The isothermal data from the sensors are compared with the data from differential scanning calorimeter.

• 한국염색가공학회지
• /
• 제14권1호
• /
• pp.43-50
• /
• 2002

Silk/Cotton fabrics were treated with butanetetracarboxylic acid(BTCA) to improve crease recovery and anti-shrinking properties at various curing temperatures and pH values. We investigated the effects of finishing conditions on add-on of BTCA, bending property(E, 2HB), wrinkle recovery angle, shrinkage, and dyeing properties. The Add-on of BTCA increased with increasing curing temperature and concentration. Crease recovery was improved with decreasing shrinkage. Maximum add-on of BTCA was showed at pH 2.5. In case of dyeing and mercerization, silk side treated with BTCA was more flexible than untreated, whereas cotton side was more stiff. In dyeing after mercerization, B and 2HB values were higher and K/S values were doubled nearly. The hand of fabric improved with decreasing B and 2HB by the BTCA treatment. BTCA treatment after reactive dyeing improved crease recovery, and caused no change of color difference. However, BTCA treatment after reactive dyeing didn't improve crease recovery, whereas B and 2HB were decreased considerably by the treatment.

• 한국염색가공학회지
• /
• 제22권4호
• /
• pp.300-305
• /
• 2010

Poly(ethylene terephthalate)(PET) tire cord has relatively lower adhesion properties caused by limited reacting sites. In order to improve the adhesion force between PET tire cord and rubber, an additional process to activate surface of PET has been employed. Atmospheric plasma was used to substitute the chemical finishing process of PET tire cord as a green dipping process. Contact angle was measured to confirm surface change of PET after plasma treatment. The treated PET tire cords with/without resorcinol-formaldehyde-latex(RFL) and unvulcanized rubber were vulcanized in a testing mold at $160^{\circ}C$. After atmospheric plasma treatment of PET tire cord, adhesion force was somewhat increased under some conditions.

• Food Science and Biotechnology
• /
• 제17권5호
• /
• pp.1119-1121
• /
• 2008

The effects of storage time (0, 1, and 2 month) and temperature (5, 15, and $25^{\circ}C$) on the dynamic rheological properties of hot pepper-soybean paste (HPSP) mixed with acetylated starches (AS) were studied by small-deformation oscillatory measurements. Dynamic moduli (G', G", and $\eta^*$) values of HPSP-AS mixtures increased with an increase in storage time and also decreased with increasing storage temperature. However, dynamic moduli values of the control (no added AS) were independent on storage time and temperature. Tan $\delta$ values (ratio of G"/G') in all HPSP samples did not change much with an increase in storage time and temperature. After 2 months of storage, the dynamic moduli of the HPSP-AS mixture samples were much lower than those of the control, indicating that the addition of AS can inhibit the retrogradation that developed over a long period of storage. Structural and rheological properties of HPSP samples seem to be stabilized by the presence of AS.

• 한국대기환경학회지
• /
• 제21권4호
• /
• pp.471-478
• /
• 2005

The objective of this research is to improve adsorption efficiency of adsorbent made from MSWI (Municipal Solid Waste Incinerator) ny ash by $HNO_3$ activation. The acidity and the basicity were determined by Boehm's method and the surface structure was studied by BET method with N2 adsorption. The adsorption properties were investigated with benzene and MEK (Methylethylketone). $HNO_3$ activation can modify the surface property of an adsorbent such as specific surface area, pore volume, and functional group. According to the results, the specific surface area of the adsorbent was increased from $309.2m^2/g\;to\;553.2 m^2/g$ by activation. Also oxygen-containing functional groups were formed on it.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1218-1223
• /
• 2007

In this study, we experimentally investigate the equivalent ring theory for a slightly asymmetric ring. The slightly asymmetric ring has mode pair and frequency pair due to the small asymmetry and this mode pair generates beat in vibration and sound. In this paper, a slightly asymmetric ring is modeled as the equivalent ring, i.e., the assemblage of a symmetric ring and imperfect point masses. The equivalent ring has the same mode pair condition as that of the original asymmetric ring. Effect of the additional mass attachment is investigated by the equivalent ring theory and the result is compared with those of the measurement and the finite element analysis. It is confirmed that the original ring and the equivalent ring show the same change in frequency and mode under the various additional imperfection mass conditions. The equivalent ring theory explains how the asymmetric elements influence the mode characteristics and provides useful information to tune the beat property.

• Communications for Statistical Applications and Methods
• /
• 제24권3호
• /
• pp.317-324
• /
• 2017

An influence measure known as Cook's distance has been used for judging the influence of each observation on the least squares estimate of the parameter vector. The distance does not reflect the distributional property of the change in the least squares estimator of the regression coefficients due to case deletions: the distribution has a covariance matrix of rank one and thus it has a support set determined by a line in the multidimensional Euclidean space. As a result, the use of Cook's distance may fail to correctly provide information about influential observations, and we study some reasons for the failure. Three illustrative examples will be provided, in which the use of Cook's distance fails to give the right information about influential observations or it provides the right information about the most influential observation. We will seek some reasons for the wrong or right provision of information.