• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.519-523
• /
• 2000

Using plasma-enhanced chemical vapor deposition (PECVD), carbon thin film as electron field emitter were fabricated. These carbon thin film were deposited on Si(100) substrate at several RF power. These film were estimated by raman spectroscopy, scanning electron microscopy, and field emission. The field electron emission property of these carbon thin film was estimated by a diode technique. As the result, we observed that the field emission properties of these films were promoted by higher RF power. These results are explained as change of surface morphology and structural properties of carbon thin film

• Journal of the Korean institute of surface engineering
• /
• v.50 no.6
• /
• pp.492-497
• /
• 2017

In this study, we investigated the effect of thermal aging on mechanical characteristics of Inconel 600 nickel-based alloy. The thermal aging was conducted up to 1000 hours at an atmosphere of $650^{\circ}C$. The microstructure of thermally aged specimens was investigated by an optical microscope (OM), scanning electron microscope (SEM) and energy dispersive spectrometer (EDS). In addition, tensile test (strain rate: 2 mm/min) and micro Vickers hardness test were conducted to evaluate mechanical properties with time. As a result of the experiment, Cr-rich carbide continuously precipitated during thermal aging, leading to the change of the mechanical characteristics and fracture mode. With the increase of aging time, tensile strength, yield strength, and hardness gradually decreased. The fracture mode changed from ductile to brittle with the increase of grain boundary carbide.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.5
• /
• pp.365-371
• /
• 2003

We prepared silicon on insulator(SOI) wafer pairs of Si/1800${\AA}$ -SiO$_2$ ∥ 1800${\AA}$ -SiO$_2$/Si using water direct bonding method. Wafer pairs bonded at room-temperature were annealed by a normal furnace system or a fast linear annealing(FLA) equipment, and the micro-structure of bonding interfaces for each annealing method was investigated. Upper wafer of bonded pairs was polished to be 50 $\mu\textrm{m}$ by chemical mechanical polishing(CMP) process to confirm the real application. Defects and bonding area of bonded water pairs were observed by optical images. Electrical and mechanical properties were characterized by measuring leakage current for sweeping to 120 V, and by observing the change of wafer curvature with annealing process, respectively. FLA process was superior to normal furnace process in aspects of bonding area, I-V property, and stress generation.

• Journal of Powder Materials
• /
• v.8 no.4
• /
• pp.239-244
• /
• 2001

To investigate the effect of process parameters on selective laser sintering of Cu/polyamide mixed powder, Cu/polyamide mixed powder was sintered by selective laser with changing laser power and scanning speed. The properties of sintered body were evaluated by measuring the density and tensile strength, and analysis of XRD, FT-Raman and microstructure. With an increase in the laser power, the density and ultimate tensile strength of sintered Cu/polyamide body increase and then decrease. The maximum values of the density and ultimate tensile strength were decreased with increasing laser scanning speed. These changes were concerned with the difference of irradiation energy of laser into the powder layer. It was considered that the change of the mechanical property of the sintered body with irradiation energy of laser is due to the changes of amount of copper particle and property of polyamide.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.350-351
• /
• 2006

Thick film mechanical sensors can be categorized into four main areas piezoresistive, piezoelectric, capacitive and mechanic tube. In this areas, the thick film strain gage is the earliest example of a primary sensing element based on the substrates. The latest thick film sensor is used various pastes that have been specifically developed for pressure sensor application. Some elastic materials exhibit a change in bulk resistivity when they are subjected to displacement by an applied pressure. This property is referred to as piezoresistivity and is a major factor influencing the sensitivity of a piezoresistive strain gage. The effect of thick film resistors was first noticed in the early 1970, as described by Holmes in his paper in 1973.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.1
• /
• pp.6-9
• /
• 2010

Surface properties of polytetrafluoroethylene(PTFE) films fabricated by rf-magnetron sputtering system with UV surface treatment were investigated to increase water contact angle for their hydrophobic property. We found that the surface morphology and water contact angles of PTFE film modified as a function of the UV treatment times using UV-irradiation were influenced. The water contact angle of PTFE film with optimized UV treatment time for 15 minute showed a high hydrophobicity compared with the film without any surface treatment. We thought that it was due to the energy change of PTFE surface with an adhesion improvement to the glass surface as a smoothing a rough surface with needle-shape and/or the enhancement of an interface property as a removing some defects on the surface like a cleaning effect.

• Journal of Magnetics
• /
• v.18 no.3
• /
• pp.348-351
• /
• 2013

Inconel 600 alloy, Ni base alloy, is widely used for steam generator tubings where sensitization occurs at grain boundaries and sensitization will induce tubing failures. This alloy has usually paramagnetic property, however, it transforms into ferromagnetic property along grain boundaries when sensitization occurs: this means NDE using magnetism for sensitization is possible. Therefore, in this study, Inconel 600 alloys were heat treated at 873 K from 0 to 400 hours so as to generate sensitization and their magnetic properties were investigated in detail. The saturation and the residual magnetization increase with increasing heat treatment time and take a maximum. On the other hand, the coercive force decreases with the increase in time of heat treatment. We confirmed that characteristics at only grain boundaries change into ferromagnetic phase by a MFM observation. As a trial for industrial application, heat treated Inconel 600 alloy was scanned by a magnetic field sensor, and the variations in magnetization were obtained nondestructively. The results indicate a feasibility of magnetic NDE for sensitization of Inconel 600 alloy.

• International Journal of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.54-59
• /
• 2019

The parametrization of the surface plays an important role in the 3D computer graphics and computer vision. Especially, it is essential in 3D mesh editing that manipulates the position of 3D objects on a computer monitor. Because computer monitors are two-dimensional, while vertices of objects that actually want to change are in a three-dimensional virtual space. In this study, we propose a new type of parametrization method that takes advantage of the special properties of circles that are common to local parameterization. Experimental results show that our parameterization method is more efficient in terms of time and space than the standard parameterization method that was designed by Floater et al.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.1
• /
• pp.34-42
• /
• 2012

This study aims to suggest the secure indicator of parks and green areas according to the properties of the location. There were 31 study areas where negotiation was finalized from 2001 to 2008. The location types were divided by land use type before development and the ratio of mountainous and constructed parks, the ratio of green change and so forth were analyzed according to the those types. As a result, location types were classified into mountainous type, arable land type, urban district type. In terms of locational property, even though the ratio of parks and green areas was the highest at 24.9% in arable land type, the ratio was not much different from the others. Mountainous type depends on the ratio of mountainous park with 10.5%, and arable land type, and urban district type has high ratio of constructed parks. And, the ratio of green change arable land type is degraded by 32.8% and the ratio of mountainous green change is serious in the mountainous type. As a result of the selection of negotiation indicator, arable land type is closely related to the ratio of parks and green areas and the ratio of green change; mountainous type, the ratio of park and green, the ratio of mountainous green change and the ratio of constructed park and green; urban district type, the ratio of green areas.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.1
• /
• pp.64-87
• /
• 2020

The cultural property management system of Korea was established based on the modern cultural assets acts and the old imperial estate management system enacted during the Japanese occupation. Academics have researched the cultural property management system oriented on the modern cultural assets acts, but few studies have been conducted into the old imperial estate management system, which is another axis of the cultural property management system. The old imperial estate was separated from the feudal capital by the Kabo Reform, but was dismantled during the colonial invasion of Japan and managed as a hereditary property of the colonial royal family during the Japanese colonial period. After establishment of the government, the Imperial Estate Act was enacted in 1954 and defined the estate as a historical cultural property managed by the Imperial Estate Administration Office. At this time, imperial estate property that was designated as permanent preservation property was officially recognized as constituting state-owned cultural assets and public goods in accordance with Article 2 of the Act's supplementary provisions during 1963, when the first amendment to the Cultural Property Protection act was implemented. In conclusion, Korea's cultural property formation and cultural property management system were integrated into one unit from two different sources: modern cultural assets acts and the old imperial estate property management system. If the change of modern cultural assets acts was the process of regulating and managing cultural property by transplanting and applying regulations from Japan to colonial Joseon, the management of the imperial estate was a process by which the Japanese colonized the Korean Empire and disposed of the imperial estate. Independence and the establishment of the government of the Republic of Korea provided the opportunity to combine these two different streams into one. Finally, this integration was completed with the establishment of the Protection of Cultural Properties Act in 1962.