• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 추계총회,초청강연,특별강연,연구발표회
• /
• pp.99.1-99
• /
• 2000

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2008년도 제35회 하계학술대회 초록집
• /
• pp.236-236
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.257-258
• /
• 2010

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.37-37
• /
• 2009

Due to their high corrosion resistance and improved mechanical properties super-duplex stainless steel (SDSS) are extensively used in petrochemical plants such as facilities in modern oil platform and off-shore process equipment. It is well known that the best mechanical and corrosion resistance properties of super-duplex stainless steel are obtained with a microstructure having approximately equal amounts of austenite and ferrite. And it is also known that sigma($\sigma$), chi($\chi$), secondary austenite(${\gamma}2$), chromium carbides and nitride affected adversely their properties. Therefore these phases must be avoided. However, effects of succeeding weld thermal cycle on the change of microstructure of weldment at multi-pass weld were not seldom experimentally researched. Therefore in the present work, the change of weldmetal microstructure and the effect of microstructure on pitting corrosion property at $40^{\circ}C$ by succeeding each weld thermal cycle were researched. The thermal history of root side was measured experimentally and the change of microstructure of root weld according to thermal cycle of each weld layer was evaluated. And the relationship between microstructure of root weld and pitting corrosion property at $40^{\circ}C$ was also investigated. Results of the present work are show as below. 1. The ferrite contents of root weld are gradually reduced by succeeding weld thermal cycle. 2. The 2nd phases such as sigma($\sigma$), chi($\chi$), secondary austenite(${\gamma}2$), chromium carbides and nitride are increased gradually by succeeding weld thermal cycle. 3. The pitting corrosion was detected in root weld part and weight loss by pitting corrosion is increased in proportional to the time exposed over $600^{\circ}C$ of the root weld. 4. The succeeding weld thermal cycles affect the microstructure of the former weldments and promote the formation of 2nd phases. That is, the more succeeding welds are added, the more 2nd phases are gradually increased. Consequently, it is thougth that this adversely affects pitting corrosion property.

• 한국BIM학회 논문집
• /
• 제8권3호
• /
• pp.1-11
• /
• 2018

Gentrification is appearing in various areas. Especially commercial gentrification, the value of property is rising and it means the change of commercial sphere in revitalizing the underdeveloped commercial. In this study, Identify the process of increasing the franchise rate, which is changing gradually in commercial areas. We analyze prior studies on gentrification and franchise. Identify changing of land use distribution in Samcheong-dong area and analyze franchise change process. As a result of analyzing the changing of land use in Samcheong-dong area, the number of houses and other uses has continued to decrease. In the case of franchises, it increased sharply and in the case of general commercial, it steadily decreased. Looking at analyzing the franchise change process in Samcheong-dong area, In the franchise change process, there is very little change in land use from residential and other uses to general commercial. Representative spaces that show the process of franchise change are around the three-way streets, around the community service center and around the police station.

• 한방재활의학과학회지
• /
• 제19권1호
• /
• pp.169-186
• /
• 2009

Obejectives : The electroacupuncture(EA) on regional fat is often used by oriental medicine doctors in Korea. However, there have been few studies about safety and biocompatibility of its application. Therefore we investigated the safety and change of mechanical character of electroacupuncture after its application on localized fat deposit. Methods : Online surveys were completed from Aug 21 2008 to Aug 28 2008, by email, the online survey data were obtained from nearly 10,002 Korean medical doctors who listed their email address on the website of association of korean oriental medicine. This study includes an experiment on the physical strength and biological property of long needles. We represent each method which were collected in advance survey, then sealed the needles off and did laboratory experiment, which includes surface observation, analysis, vickers hardness test, and also biocompatibility and toxicity test. Results : There was no considerable difference about the physical property after applying electric current, the cell survival rate did not change in comparison with controlled group either. Conclusions : Although it seems there are no considerable acupuncture-related problem, we still need additional studies about clinical effectiveness difference related operation condition. Besides, it will need research on the actual condition, standardization, and criteria about the comsumed needle in Korea.

• 복식
• /
• 제66권6호
• /
• pp.110-121
• /
• 2016

The purpose of this study is to develop high value-added uniform design in response to climate change, and produce high sensitivity uniforms that conserve the energy of its wearers. The scope of the study encompassed entire production stage from the product planning stage to developing a prototype to collecting consumer ratings to securing intellectual property. The results of the study are as follows. First, the material was developed that maximizes insulation by replicating human body heat radiation and raising the temperature by 5 degree Celsius. Second, through Time to Market system, a luxurious synthetic wool material was developed, and warm effect was achieved. Third, pattern design engineering for easy movement and design development allowed the realization of uniform design that is compatible indoors and outdoors as well as respond to highly active climate change. Fourth, Fifth, the developed design was registered and intellectual property rights were obtained.

• 한국인쇄학회지
• /
• 제13권2호
• /
• pp.47-53
• /
• 1995

Photosensitive resin of azide type is good for resolution and inner solvent, but it is really problem to development of practical use because fanctional groups of polymer has many hydrophilic radicals. By careful attention to this point, this study was investigated synthesis term, photo property and development property of composed photosensitive resin of azida type, it is to this effect. 1) H-NMR spectrum of compared DABCI showed amion redical by $\delta$6.0~6.1ppm to substitude for azide radical by amino radical by $\delta$8.9~9.45ppm, and FT-IR absorption spectra showed the absorption bends at 2100cm. 2)FT-IR absorption spectra of PHS1-DAB, PHS2-DAB, CMM-DAB and CHM-DAB showed azida radical pick to be lost at after irradiation by UV light. 3) According to exposuer change of PHS1-DAB, PHS2-DAB, CMM-DAB and CHM-DAB, absorption maximum value of UV spectrum change was 280nm. 4) to compared relative sensitivity of compared photosensitive resin, PHS2-DAB was the best and to compared insolubility rate of compared photosensitive resin, CMM-DAB was the lower. 5)Solubility if NaOH was the best by 1.0mol/$\ell$ and solubility of developing solution of ethanol to water was it in the ratio of 4 to 1.

• 한국전자거래학회:학술대회논문집
• /
• 한국전자거래학회 1999년도 학술대회지 vol.2
• /
• pp.575-586
• /
• 1999

The advent of the Internet and the enormous increase in volume of electronically stored information (SGML, Image, Sound, etc.) has led to substantial work on IR(Information Retrieval). To service on the WWW, construction and retrieval technology of SGML, which is the fundamental standard data format for CALS/EC, is needed specially. Due to such a change, it becomes essential to change the existing paradigm of conventional information retrieval systems and to adopt new Internet service system with search engine, SGML browser and advanced Internet technology on WWW. KIPRIS(Korea Industrial Property Rights Information Service), which is the specialized and integrated Internet service systems in the field of industrial property rights information service, is trying to be a guide for our country to establish its technological competitiveness with providing the online service of high quality. The objective of the paper identifies features and technologies of KIPRIS IR(Information Retrieval) system based on WWW as follows. First, it describes the development background and process of KIPRIS. Second, it presents a fundamental technology that consists of IR(Information Retrieval) concept, BRS(Bibliographical Retrieval System) search engine, SGML implementation technologies and the Internet/WWW technologies. Third, it provides information about system configuration, architecture, and the features and characteristics of KIPRIS. Finally, the implemented KIPRIS system is introduced.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1104-1108
• /
• 2004

A Study has been made of surface modification of various polymers by ion implantation to change the optical transmittance property at ultraviolet ray (UV, $200\sim400nm$). The substrates were PC (Polycarbonate), PET(Polyethyleneteraphtalate) and PP (Polypropylene). The effects of ion implantation on the change of optical transmittance were investigated in relation to ion species, implantation energies and ion fluences. The N, Ar, Kr, Xe ion implantation performed at ion energies from 20 to 50keV. The fluences ranged from $5\times10^{15}$ to $7\times10^{16}ions/cm^2$. UV/Vis transmittance spectroscopy, FT-IR and XPS were used to investigate optical transmittance, chemical structure and surface chemical state of irradiated polymer. Surface color was changed from the yellow to the dark brown and the transmittance of UV ray in the range UV-A($320\sim400nm$) decreased more than 80% after ion implantation.