• Journal of Adhesion and Interface
• /
• v.9 no.2
• /
• pp.32-37
• /
• 2008

A series of UV-curable powder coatings with different contents of photoinitiator (0.5 wt%, 1 wt%, 2 wt%) were formulated and measured gel content, tensile strength of cured film. Heat-sensitive substrates such as MDF, plywood and PVC were coated UV-curable powder and cured coatings were measured physical properties by pendulum hardness tester, glossmeter, pull-off adhesion tester. With increasing photoinitiator content, adhesion force between coating and substrate decreased because of crosslinking density increasing. The results of pendulum hardness was not significantly changed but gloss was changed according to different substrates. Adhesion of UV-curable coatings was enough to apply for heat-sensitive substrates. From these results, we concluded that contents of photoinitiator was a effective factor in UV-curable powder coatings. UV-curable coatings was a portential candidate for heat-sensitive substrates.

• Journal of the Korean Society for Heat Treatment
• /
• v.13 no.1
• /
• pp.1-9
• /
• 2000

The microstructural characteristics and low temperature tensile properties between $25^{\circ}C$ and $-196^{\circ}C$ for as-welded and age hardened specimen by using Al 5083-H321 for base metal, 5083-5356 and 5083-4043 weldments have been investigated. The hardness of 5083-5356 weldment decreases with aging treatment, whereas the weld region of 5083-4043 weldment shows remarkable increase in hardness after aging due to the precipitation of fine Si particle at the grain boundaries and interiors. Low temperature tensile properties of 5083 AI base metal, 5083-5356 and 5083-4043 weldments appear to be the increment of tensile strengths and elongations at the room temperature and $-196^{\circ}C$, while the decrement of tensile properties around $-50^{\circ}C$ is shown. Through the observation of fine serration to fracture in the stress-strain curve and tensile fractography, the increment of localized deformation leading to promote the neck initiation and the increment of the dimple size cause to decrease in tensile strengths and elongations around $-50^{\circ}C$. For the tensile specimen of the 5083 base metal, 5083-5356 and 5083-4043 weldments, the reason to increase in elongation after solution and aging treatment is the diminishment of fine pit, the resolution of Mg into the matrix and the spheridization of the eutectic Si.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.4
• /
• pp.1-8
• /
• 2013

High loading of printing and writing grades with fillers has many advantageous aspects in papermaking because it allows decreasing fiber use and reducing manufacturing cost. High loading technology, however, has some disadvantageous aspects as well. It decreases physical properties of papers, especially strength properties. The problem associated with high loading can be reduced by applying surface sizing starch solution onto paper surface. It is important to control the penetration of the surface sizing starch solution into paper web to obtain the desired property improvement. In this study, the effect of the addition of two polymers into starch solution on paper properties has been examined. PVOH and polyDADMAC were used as polymeric additives for surface sizing with oxidized starch. Viscosity of starch solutions and surface roughness of dried starch films on glass slides showed that some interactions between polymeric additives and oxidized starch have been occurred and the most extensive interaction with starch solution was obtained with high molecular weight polyDADMAC. Low molecular weight PVOH was most effective in improving folding endurance and internal bond strength. On the other hand, polymer addition showed no effect on surface strength of paper. This indicates that not the level of starch holdout but the bonding strength of starch itself has predominant influence on surface strength of paper.

• The Plant Pathology Journal
• /
• v.16 no.6
• /
• pp.306-311
• /
• 2000

A new strain of Cucumber mosaic virus (CMV) from easter lily (Lilium longiflorum), Ly2-CMV, was identified and compared to the well-characterized Mf-CMV (subgroupⅠ) and LS-CMV (subgroupⅡ) by host reaction in several indicator plants, dsRNA analysis, serological property, RT-PCR analysis, restriction enzyme profile of the PCR products and nucleotide sequence of coat protein (CP) gene. Remarkable differences in symptoms of Ly2-CMV were found between Mf-CMV or LS-CMV in tobacco plants and Datura stramoinium. Ly2-CMV induced small necrotic ringspots on the inoculated leaves of Nicotiana tabacum cvs. Xanthi nc and Burley 21 and D. stramonium, and failed to infect these species systemically. Of the indicator plants tested, N. benthamiana only reacted with systemic infection by inoculation of Lr2-CMV. In experiments of dsRNA analysis, serology and RT-PCR of CP gene, Ly2-CMV was come within subgroupⅠ CMV. However, restriction enzyme analysis of the PCR products using MspⅠ showed that Ly2-CMV was distinct to Mf-CMV. The CP gene of Ly2-CMV contains 657 nucleotides, and the nucleotide sequence is similar to that of Mf-CMV. There is also a high degree of conservation between their putative gene products in Ly2-CMV and Mf-CMV, with five amino acid changes in the 218 amino acids of the CPs.

• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.104-111
• /
• 2013

Poymer blends of two degradable aliphatic polyesters, relatively expensive material polylactic acid (PLA) and relatively inexpensive material poly(butylene adipate-co-terephthalate) (PBAT), were used in this study. Three different kinds of modifiers were used with various amounts. Diisocyanate type methylenediphenyl 4,4'-diisocyanate (MDI) and hexamethylene diisocyanate (HDI) were used as modifiers and epoxy type coupling agents also used. The melt flow index (MFI) and dynamic viscoelasticity of various compositions of PLA/PBAT blends were studied. The mechanical property and morphology with respect to the fracture surface of PLA/PBAT blends were also investigated using tensile test and field emission scanning electronic microscopy, respectively. These tests were also used to verify the compatibility of PLA/PBAT and the effect of mechanical properties due to the use of modifiers. Tensile properties of PLA/PBAT blends modified with HDI were improved remarkably.

• Textile Coloration and Finishing
• /
• v.29 no.3
• /
• pp.115-121
• /
• 2017

Demands for nylon suede as an artificial leather are increasing due to its functionality and aesthetics. To achieve high value added nylon suede based on green technology, this study was carried out in order to obtain useful data for the nylon suede fabrics with eco-friendly dyeing process by a pad-steam method instead of a dip dyeing process using sulphur black dye to reduce the industrial waste of water. The dyeability of the nylon suede was investigated according to reducing temperatures, dye concentrations, and reducing agent's concentrations. Throughout the results of the CIE $L^*a^*b^*$ and Munsell values, the optimized dyeing conditions of the nylon suede using sulphur black dye are $70^{\circ}C$ of dyeing temperature, 30% o.w.f. of dye concentration, and $9g/{\ell}$ of reduction agent concentration, respectively. Furthermore washing colorfastness, light colorfastness and perspiration colorfastness were achieved in the range of 4-5 grades.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.346-351
• /
• 2014

With the world population's continuous growth and urban industrialization, capacitive deionization (CDI) has been proposed as a next-generation water treatment technology to augment the supply of water. As a future water treatment method, CDI attracts significant attention because it offers small energy consumption and low environmental impact in comparison to conventional methods. Carbon electrodes, which have large surface area and high conductivity, are mainly used as electrode materials of choice for the removal of ions in water. A variety of carbon materials have been investigated, including their adsorption-desorption behavior in accordance to the specific surface area and pore size distribution. In this review, we analyzed and highlighted these carbon materials and looked at the impact of pore size distribution to the overall CDI efficiency. Finally, we propose an optimal condition in the interplay between micropores and mesopores in order to provide the best electrosorption property for these carbon electrodes.

• The Korea Journal of Herbology
• /
• v.26 no.4
• /
• pp.67-74
• /
• 2011

Objectives : The purpose of the study is to determine the neuroprotective effects of the water extract of Angelicae Acutilobae Radix(AA) on ischemia reperfusion-induced apoptosis in SK-N-SH human brain neuronal cells. Methods: SK-N-SH cells were treated with different concentrations of AA water extract (0.1, 0.2, 0.5 and 1.0 mg/ml) for 2 hr and then stimulated with Dulbecco's phosphate-buffered saline containing CI-DPBS: 3mM sodium azide and 10 mM 2-deoxy-D-glucose for 45 min, reperfused with growth medium, and incubated for 24 h. Cell viability was determined by WST-1 assay, and ATP/ADP levels were measured by ADP/ATP ratio assay kit. The levels of caspase-3 protein were determined by Western blot and apoptotic body was observed by Hoechst 33258 staining. Results : AA extract significantly inhibited decreasing the cell viability in ischemia-induced SK-N-SH cells. AA also increased the ratio of ADP/ATP in ischemia-induced neuronal cells and decreased the expression levels of apoptotic protein, caspase-3 and apoptotic DNA damage. Conclusions : Our results suggest that AA extract has a neuroprotective property via suppressing the apoptosis and increasing the energy levels in neuronal cells, suggesting that AA extract may has a therapeutic potential in the treatment of ischemic brain injury.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.3
• /
• pp.153-159
• /
• 2014

As the number of treatments in the therapeutic ultrasound field targeted at fat tissue increase, the performance of the equipment should be evaluated for safety using a fat phantom. In this study, a fat phantom was fabricated using olive oil and a tissue-mimicking material (TMM) phantom. To evaluate the acoustic properties of the TMM phantom according to the changes in the olive oil, the composition ratio of a liquid mixture of olive oil with a surfactant was adjusted from 5-20% in 5% steps. The acoustic properties of the phantom were evaluated using the sound velocity, attenuation coefficient, density, and acoustic impedance. The experimental results showed that the sound velocity decreased with increasing amount of olive oil but the other acoustic properties did not change. In addition, the phantom using an olive-oil mixture with a 15% composition ratio was most similar to the acoustic characteristics of fat tissue with a sound velocity of 1477.35 m/s, an attenuation coefficient of 0.514 dB/MHz-cm, a density of $1.07g/cm^3$, and an acoustic impedance of 1.575 MRayl. These experimental results are expected contribute to the accuracy of the results using a TMM phantom and will be useful for the therapeutic ultrasound field targeted at subcutaneous fat tissue.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.894-898
• /
• 2011

The first example of lead compound from $Pb(NO_3)_2$ and $H_3L$ N-heterocyclic ligand $(H_3L\;=\;(HO_2C)_2(C_3N_2)(C_3H_7)CH_2(C_6H_4)(C_6H_3)CO_2H)$, $[Pb_4(L')_4]{\cdot}5H_2O$ 1 (L' = OOC$(C_3H_7)(C_3N_2)CH_2(C_6H_4)(C_6H_3)COO)$, has been obtained under hydrothermal condition by decarboxylation, and characterized by elemental analysis, IR, TGDTA, and single-crystal X-ray diffraction. Compound 1 possesses a rare two-dimensional upper-lower offset terrace-like layer structure. In 1, crystallographic distinct Pb(II) ion adopts five-coordination geometry, and two lattice water molecules occupy the voids between 2-D layers. Results of solid state fluorescence measurement indicate that the emission band 458 nm may be assigned to $\pi^*-n$ and $\pi^*-\pi$ electronic transitions within the aromatic systems of the ligand L', however, the emission bands centred at 555 nm, 600 nm and 719 nm may be derived from phosphorescent emission ($\lambda_{excitation}$ = 390 nm).