• Macromolecular Research
• /
• v.9 no.2
• /
• pp.122-128
• /
• 2001

Monodisperse composite latex particles with size of ca. 300 nm, which consist ofn-butyl acrylate as a soft phase and methyl methacrylate as a hard phase with different morphology, were synthesized by seeded multi-stage emulsion polymerization. Three types of composite latex particles including random-, core/shell-, and gradient-type particles were obtained by using different monomer feeding methods during semi-batch emulsion polymerization. Effect of poly(butyl acrylate)-poly(methyl methacrylate) rubber particle morphology on the mechanical and rheological properties of rubber toughened poly(methyl methacrylate) was investigated. Among three different rubber particles, the gradient-type rubber particle showed better toughening effect than others. No significant variation of rheological property of poly(methyl methacrylate)/rubber blends was observed for the different rubber particle morphology.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.12
• /
• pp.62-67
• /
• 1997

The optical lithography wit an ArF excimer laser as a light source is expected to be used in the mass production of giga-bit DRAMs which require less than 0.2.mu.m minimum feature size. In this case, the distortion of a patterned image becomes very severe, since the lithography porcess is performed at the resolution limit. Traditionally, the photomask pattern was designed and revised with trial-and-error methods, such as repeated execution of process simulators or actual process experiments which require time and effort. Ths paper describes a program which automatically finds an optimal mask pattern. The program divides the mask plane into cells with same sizes, chooses a cell randomly, changes the transparent/opaque property of the cell, and eventually genrates a mask pattern which produces required image pattern. The program was applied to real DRAM cell patterns to produce mask patterns which genertes image patterns closer to object images than original mask patterns.

• Journal of Navigation and Port Research
• /
• v.28 no.4
• /
• pp.293-297
• /
• 2004

In this papers, an S-band oscillator of the low phase noise property using a miniaturized micro-strip hairpin shaped ring resonator is presented The substrate has a dielectric constant $\epsilon_\gamma$＝3.5, a thickness h＝0.508 mm, and loss tangent $tan\delta$＝0.002. A designed and fabricated oscillator shows low phase noise performance of 99. 71 dBc/Hz at 100 KHz offset frequency and of output power 19.584 dBm at center frequency 2.450 GHz. This circuit was fabricated with hybrid technique, but can be fully compatible with the MMIC due to its entirely planar structure.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.2
• /
• pp.48-54
• /
• 2002

In this study, a neuro-fuzzy controller which has the characteristic of fuzzy control and artificial neural network is designed. A fuzzy rule to be applied is automatically selected by the allocated neurons. The neurons correspond to fuzzy rules are created by an expert. To adapt the more precise model is implemented by error back-propagation learning algorithm to adjust the link-weight of fuzzy membership function in the neuro-fuzzy controller. The more classified fuzzy rule is used to include the property of dual mode method. In order to verify the effectiveness of the proposed algorithm designed above, an operating characteristic of a DC servo motor with variable load is investigated.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.57-57
• /
• 2018

Zinc-oxide (ZnO), II-VI semiconductor with a wide and direct band gap (Eg: 3.2~3.4 eV), is one of the most potential candidates to substitute for ITO due to its excellent chemical, thermal stability, specific electrical and optoelectronic property. However, the electrical resistivity of un-doped ZnO is not low enough for the practical applications. Therefore, a number of doped ZnO films have been extensively studied for improving the electrical conductivities. In this study, Ti-doped ZnO films were successfully prepared by atomic layer deposition (ALD) techniques. ALD technique was adopted to careful control of Ti doping concentration in ZnO films and to show its feasible application for 3D nanostructured TCO layers. Here, the structural, optical and electrical properties of the Ti-doped ZnO depending on the Ti doping concentration were systematically presented. Also, we presented 3D nanostructured Ti-doped ZnO layer by combining ALD and nanotemplate processes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.205-210
• /
• 2005

A new configuration of LCD projectors for polarized stereoscopic projection having no light loss in the polarization process is suggested. In the proposed system, two polarizing filters that are employed in the conventional LCD polarized stereoscopic projection system causing additional light loss and image distortion are excluded by taking into account of polarization property of the LCD projector and image processing techniques. From some experimental results by using the Type-1 LCD projectors of NEC MT 1060R, light loss of the proposed system occurring in the polarization process is found to be zero and the resultant stereoscopic video image projected from this system is also found to be 213%, 75% and 300% brighter than those projected from the conventional Type-1 LCD projector-based, Type-2 LCD projector-based and Type-3 projector-based systems, respectively.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.3
• /
• pp.180-185
• /
• 2005

Microstrip antennas generally have a lot of advantages that are thin profile, lightweight, low cost, and conformability to a shaped surface application with integrated circuitry. In addition to military applications, they have become attractive candidates in a variety of commercial applications such as mobile satellite communications, the direct broadcast system (DBS), global positioning system (GPS), and remote sensing. Recently, many of the researches have been achieved for improving the impedance bandwidth of microstrip antennas. The basic form of the microstrip antenna, consisting of a conducting patch printed on a grounded substrate, has an impedance bandwidth of $1\~2\%$. For improvement of narrow bandwidth of microstrip patch, we were designed U-slot microstrip patch antenna in this paper. This antenna had wide bandwidth for all personal communication services (PCS) and IMT-2000. For the design of U-slot microstrip patch antenna using a finite difference time domain(FDTD) method. This numerical method could get the frequency property of U-slot patch antenna and the electromagnetic fields of slots.

• Journal of the Korean institute of surface engineering
• /
• v.30 no.6
• /
• pp.365-373
• /
• 1997

316L and 420 Stainless steels were deposited onto AZ9ID commercial magnesium alloy by plasma spray process with various gas flow rate of, TEX>$H_2$ secondary gas. And hardness as well as were track volume, coefficient of friction also had been measured. wear and hardness were measured by using reciprocal configuration tribometer and microghardness tester, respectively. Also, the microstructure of the coatings surface the cross sectional area of coating surface and cross sectional area of coaing/Substrate interface had been analyzed with Scanning Electron Microscope(SEM) and Optical microscope(OM). Finally, optimal process parameters for the improvement of coating efficiency such as mechanical property and wear behavior were examined.

• Journal of the Korea Computer Graphics Society
• /
• v.9 no.2
• /
• pp.1-9
• /
• 2003

Information assurance(IA) refers to methodologies to protect engineering information by ensuring its availability, confidentiality, integrity, non-repudiation, authentication, access control, etc. In collaborative design, IA techniques are needed to protect intellectual property, establish security privileges and create "need to know" protections on critical features. Aside from 3D watermarking, research on how to provide IA to distributed collaborative engineering teams is largely non-existent. This paper provides a framework for information assurance within collaborative design, based on a technique we call role-based viewing. Such role-based viewing is achieved through integration of multi-resolution geometry and security models. 3D models are geometrically partitioned, and the partitioning is used to create multi-resolution mesh hierarchies. Extracting an appropriately simplified model suitable for access rights for individual designers within a collaborative design environment is driven by an elaborate access control mechanism.

• Fibers and Polymers
• /
• v.1 no.2
• /
• pp.67-70
• /
• 2000

Rosin maleic anhydride adduct (RMA)-bisester was prepared by the esterification of chlorinated RMA with hydroquinone. Phenylpyridinylcyclot.isiloxane ($D_3^{Ph,Py}$) was synthesized from phenylpyridinyldichlorosilane in the presence of zinc oxide catalyst, and amino group terminated polyphenylpyridinylsiloxane prepolymer was prepared by equilibrium polymerization of $D_3^{Ph,Py}$ with 1,3-bis(3-aminopropyl)-1,1,3,3-tetramethyldisiloxane. Rosinimide (PSMR) was prepared from the imidization of RMA-bisester with polyphenylpyridinylsiloxane prepolymer at 12$0^{\circ}C$ for 7 h using ${\gamma}$-butyrolactone/pyridine. It showed that PSMR had better thermal stalbility than rosinimide modified with polydimethylsiloxane.