• 한국자동차공학회논문집
• /
• 제18권1호
• /
• pp.74-85
• /
• 2010

In order to formulate the compounded polypropylene(C-PP) which is suitable to an automotive door trim panel, 9 sorts of properties were measured after manufacturing the C-PP using an extruder and an injection machine with polypropylene(PP), ethylene-octene rubber(EOR) and talc. Mixture design, especially extreme vertices design, in DOE with MINITAB - commercial software was used to analyze the data. The relations between each property and each component, for example, $y=0.00907222x_1+0.00870556x_2+0.0155722x_3$ for specific gravity, were found out by the regression analysis and the variance analysis. The optimized formulation of the C-PP for an automotive door trim panel was acquired at PP(77.6962), EOR(11.0238) and talc(10.2800) by use of the response optimizer(mixture) in MINITAB.

• 패션비즈니스
• /
• 제17권3호
• /
• pp.30-47
• /
• 2013

In the modern fashion industry, efficiency has been increasing thanks to development of computer graphics, IT technology, and digitalization. Unlike the past when fashion design heavily depended on handwork, digitalization of fashion industry makes fabrication time shorter and enables designers to adopt comprehensive expression, generating high value-added product. The Apparel CAD, an example of the digitalized fashion industry, has been developed from 2D system into a system providing 3D simulation. Digital clothing can be determined as an activity of designers using the tool in order to fabricate pattern and simulate its designed clothes in the virtual space of computer. In this study, physical properties of eight materials, which can be utilized on a par with current fashion trend, have been specified. For more sophisticated investigation, external appearance of the material was investigated by 3D scanning. In order to examine the physical properties of fabric specimens, KES(Kawabata Evaluation System) measurements and other physical property measurements were made. With the results, virtual material and clothes were simulated via CLO 3D, one of 3D apparel CAD systems. Then, virtual fabrics and clothes of similar types were generated and analyzed.

• 로봇학회논문지
• /
• 제11권3호
• /
• pp.156-162
• /
• 2016

For the underwater localization, acoustic sensor systems are widely used due to greater penetration properties of acoustic signals in underwater environments. On the other hand, the good penetration property causes multipath and interference effects in structured environment too. To overcome this demerit, a localization method using the attenuation of electro-magnetic(EM) waves was proposed in several literatures, in which distance estimation and 2D-localization experiments show remarkable results. However, in 3D-localization application, the estimation difficulties increase due to the nonuniform (doughnut like) radiation pattern of an omni-directional antenna related to the depth direction. For solving this problem, we added a depth sensor for improving underwater 3D-localization with the EM wave method. A micro scale pressure sensor is located in the mobile node antenna, and the depth data from the pressure sensor is calibrated by the curve fitting algorithm. We adapted the depth(z) data to 3D EM wave pattern model for the error reduction of the localization. Finally, some experiments were executed for 3D localization with the fast calculation and less errors.

• 한국해양공학회지
• /
• 제36권2호
• /
• pp.132-142
• /
• 2022

We investigate the performance of multi-body wave energy converters (WECs). This investigation considers multiple scattering of water waves by the buoys of a WEC under the generalized mode approach. Predominantly, the effect of a WEC's configuration on its energy extraction is studied in this research. First, single-row terminator and single-column attenuator arrays of vertical cylinders have been studied. The performance of these attenuator arrays shows that the wall effect induced by the periodic buoys influences the wave propagation and energy extraction in these WECs. Further studies show that a single-row terminator array of vertical cylinders performs better than the corresponding single-column attenuator array. Subsequently, multi-row terminator arrays of vertical cylinders are investigated by conducting a parametric study. This parametric study shows that the hydrodynamic property of three resonance phenomena makes energy extraction efficiency drop down, and the magnitude of energy extracted oscillates between the resonance points in these WECs. Finally, a 4×8 terminator array of vertical cylinders is studied to determine the effect of various d_x (x-directional distance between adjacent rows) within this WEC on its performance. In particular, this study enforces at least two equal d_x values within the 4×8 terminator array of vertical cylinders. It shows that a small value of this d_x leads to better energy extraction efficiency in some of these various d_x arrays than that of a corresponding regular array with the same d_x.

• 한국정보통신학회논문지
• /
• 제9권2호
• /
• pp.307-315
• /
• 2005

대역통과용 표면 탄성파 필터 제작하기 위하여 Langasite 기판위에 빗살무의 변환기를 형성시켜 모의실험을 수행하였으며, 전극재료로는 Al-Cu를 사용하였다 모의실험을 바탕으로 입력단에는 IDT를 직렬형태로 연결시킨 block 형태로 하중을 가하는 전극 방법을 쓰고 출력단은 withdrawal 형태로 하중을 가하는 방법을 써서 제작하였다 이를 바탕으로 광대역의 SAW 필터 전극 설계 방식에 대한 적절한 위상조건도 얻고자 시도하였다. Langasite 기판위에 형성시킨 입출력 빗살무늬 변환기 전극 수는 50쌍, 두께는 5000$\AA$ 으로 하였으며, 반사기 폭은 3.6$mu$m으로 하였다. 제작한 필터의 주파수 특성은 중심주파수가 대략 190MHz정도, 대역폭은 8.2MHz 정도로 측정되었으며, matching 후 return-loss는 -l6dB 이하이고, 리플 특성은 4dB 정도이며, 반사에 의한 잔향은 -l8dB 이하로 측정되었다.

• 한국정보통신학회논문지
• /
• 제13권12호
• /
• pp.2662-2670
• /
• 2009

반사기 형태에 따른 경사진 빗살무늬 변환기 SAW 필터 특성을 비교하기 위해 모의실험을 통해 Langasite 기판위에 전극을 형성시켰으며, 전극재료로는 Al-Cu를 사용하였다. 모의실험을 바탕으로 입력단에는 IDT를 직렬형태로 연결시킨 block 형태로 하중을 가하는 전극 방법을 쓰고 출력단은 withdrawal 형태로 하중을 가하는 방법을 써서 제작하였다. 이를 바탕으로 광대역의 SAW 필터 전극 설계 방식에 대한 적절한 위상조건도 얻고자 시도하였다. Langasite 기판위에 형성시킨 입 출력빗살무늬 변환기 전극수는 50쌍, 두께는$5000{\AA}$으로 하였으며, 반사기 폭과 간격은 각각 $3.6{\mu}m$ 및 $2.0{\mu}m$으로 하였다. 제작한필터의 주파수 특성은 중심주파수가 대략 190MHz정도, 대역폭은 8.0MHz 정도로 측정되었으며, matching 후 return-loss는 -16dB 이하이고, 리플 특성은 4dB 정도이며, 반사에 의한 잔향은 -20dB 이하로 측정되었다.

• 한국항행학회논문지
• /
• 제12권2호
• /
• pp.122-131
• /
• 2008

본 논문에서는 마이크로스트립 헤어핀 형태의 링 공진기를 이용하여 저위상 잡음을 개선한 소형화된 S 대역에 사용가능한 발진기를 설계 및 제작하였다. 기판은 고조파 특성이 우수한 유전율 ${\varepsilon}_r$=3.5 기판두께 h=20mil 금속두께 t=17um 손실 탄젠트 $tan{\delta}$=0.0025 인 TACONIC사의 RF-35를 사용하였다. 측정된 결과 발진 주파수는 2.45 GHz에서 출력전력은 20.9 dBm으로서 기존의 발진기에 비하여 상당히 높은 출력을 얻었고, 위상 잡음 특성은 100 kHz offset에서 -100.5 dBc/Hz 로서 기존의 발진기 성능과 비교하면 우수한 특성이 있음을 확인할 수 있었고, 고조파 억압 특성은 32 dBc 이상으로서 우수한 특성을 갖는 발진기임을 보여주었다. 본 논문에서 제안된 발진기의 형태를 이용하여 RFIC, MIC, MMIC 형태로 제작한다면 발진기를 소형화할 수 있을 것이며, 이 제작된 발진기는 S-밴드의 주파수원으로 이용 가능할 수 있을 것으로 사료된다.

• 대한치과기공학회지
• /
• 제43권3호
• /
• pp.71-76
• /
• 2021

Purpose: In this study, thermal properties were observed by measuring the extent of thermal expansion and the amount of thermal residue that appears upon burnout on a workpiece made by using a dental digital light processing (DLP) three-dimensional (3D) printer. Methods: Thermal properties of workpieces manufactured by using two 3D printers were observed. The specimens were designed in cylindrical form with dimensions 10 mm in diameter and 10 mm in height. The control specimen was made of wax, and the experimental specimen was made of resin. The thermal expansion rate was measured by applying heat to three types of specimens, and burnout residue was measured. Results: The thermal expansion rate of the wax pattern (WP) specimen was 0.93%±0.05%, of the RP1 specimen was 1.30%±0.08%, and of the RP2 specimen was 1.20%±0.09%. Measuring the recovered residue yielded residual amounts of 0.2% for the WP specimen, 1.1% for the RP2 specimen, and 1.8% for the RP1 specimen. Conclusion: 1. From measurements of the workpieces manufactured by dental DLP 3D printing, the thermal expansion rate was found to be higher than that of wax. 2. As a result of measuring burnout residues on the workpieces manufactured by dental DLP 3D printing, the required summoning temperature to obtain suitable castings was determined to >750℃.

• Journal of Magnetics
• /
• 제19권3호
• /
• pp.221-226
• /
• 2014

Significantly enhanced low-field magnetoresistance (LFMR) and maximum dMR/dH {$(dMR/dH)_{max}$} values were successfully achieved from $La_{0.7}Sr_{0.3}MnO_3$(LSMO)-manganese oxide composite samples prepared by liquid phase sintering, compared with those of the same composites prepared by solid state reaction. For this study, pure LSMO and LSMO-manganese oxide composites with various nominal compositions of (1-x)LSMO-$xMn_2O_3$ (x = 0.1, 0.2, 0.3, 0.4, and 0.8) were sintered at $1450^{\circ}C$, above the eutectic temperature of $1430^{\circ}C$, for 1 h in air. The highest LFMR value of 1.28% with the highest $(dMR/dH)_{max}$ value of 21.1% $kOe^{-1}$ was obtained from the composite sample with x = 0.3 at 290 K in 500 Oe. This enhancement of LFMR and $(dMR/dH)_{max}$ values is ascribed to efficient suppression of magnetic disorder at the LSMO grain boundary, by forming a characteristic LSMO-manganese eutectic structure.

• 한국지능시스템학회논문지
• /
• 제13권6호
• /
• pp.716-721
• /
• 2003

본 논문에서는 사람의 생태학적, 행동학적 특성을 이용하여 개인을 인식하는 생체인식 기법의 하나인 홍채인식을 다루었다. 사람의 홍채는 태어날 때 한번 정해지면 평생 변화하지 않는 특성을 가지고 있으며, 개개인별로 모양이 모두 다른 것으로 알려져 있다. 이에, 본 논문에서는 홍채영상 취득시 조명에 의한 동공의 크기 변화에 민감하지 않은 2차원의 홍채패턴을 취득하고, 2D Gabor 필터와 48개의 분할된 섹터로부터 특징 값을 추출한다. 인식과정에서는 correlation 계수를 이용하여 서로 다른 홍채의 특징 값에 대해 유사도를 측정하고 가장 큰 값을 갖는 대상을 찾게 되는데, 이때, 3개의 필터를 거쳐 얻어진 영상에 대해 최고의 값을 인식 대상자로 인정하므로 오인식 될 확률을 최소화 할 수 있다. 제안한 알고리듬의 유용성을 확인하기 위해 대상자 10명에 대해 5회씩 촬영한 데이터베이스에 대해 실험한 결과 90% 이상의 높은 인식률을 얻었다.