• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권2호
• /
• pp.93-99
• /
• 2001

A new type geometric and mathematical network reduction model is introduced. Large-scale network is analyzed with analytic approach. The graph has many nodes, branches and loops. Circuit equation are obtained from these elements and connection rule. In this paper, the analytic relation between voltage source has a mutual different graphic property. Node-reduction procedure is achieved with this circuit property. Consequently voltage source value is included into the adjacent node-analyzing equation. A resultant model equations are reduced as much as voltage source number. Matrix rank is (n-1-k), where n, k is node and voltage source number. The reduction procedure is described and verified with geometric principle and circuit theory. Matrix type circuit equation can be composed with this technique. The last results shall be calculated by using computer.

• 분석과학
• /
• 제24권2호
• /
• pp.105-112
• /
• 2011

태양전지용 박막 규소나 차세대 반도체용 박막트랜지스터의 원료로 사용 가능한 하이드로폴리실란의 합성과 물성 분석에 관한 연구이다. 이러한 하이드로폴리실란을 유기 치환기가 없는 사염화규소를 사용하여 합성한 것이 가장 큰 특징이며, 일반적으로 알칼리금속을 사용한 환원법으로 유기용매에 가용성인 하이드로폴리실란을 합성하는 최적 조건을 확립하고자 하였으며 하이드로폴리실란 용액은 그 물성을 여러 가지 분석 방법을 사용하여 조사하였으며 또한 열분해 실험을 통해 무정형 또는 다결정성 규소로 전환시킬 수 있음을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.208-211
• /
• 2003

In this paper, mechanical property of electric epoxy with water aging was discussed. We studied mechanical property of elastic resin after absorption in water from 0 to 484 hour. As a result, diffusion factor of elastic epoxy showed $20-21{\times}10^{-4}mm^2/s$ and general epoxy showed $9.5{\times}10^{-4}mm^2/s$. Elastic property increased linearly according to amount of addictives and decreased elastic property according to amount of water absorption. Tensile strength was reduced to add to addictives. It was effected by water absorption of micro-void of elastic epoxy. Hardness inclined to decrease after increasing according to absorbed time.

• Journal of Advanced Marine Engineering and Technology
• /
• 제19권2호
• /
• pp.36-46
• /
• 1995

In this paper, fatigue crack propagation behaviors were investigated experimentally for the materials, carbon steel forgings (SF45A, SF50A, SF60A) which are used in the marine propeller shaft. The results obtained are as follows: The number of cycles required to grow crack length 1.30mm from microcrack initiation was about 60% of the total fatigue life. Fatigue crack propagation rate was expressed by the equation d(2a)/dN_B 2a/$N_f$ and the result was agreed well with the experimented data. And the equation d(2a)/dN=$C{\sigma}_a^m(2a)^n$ was evaluated also. Obtained material property m and n are 3~5 and 1-1.5 respectably, and the result was reasonably agreed to the data obtained from experiments.

• 대한화학회지
• /
• 제39권9호
• /
• pp.685-691
• /
• 1995

결정 분자 궤도함수[EHTB]를 계산할 수 있는 VAX 컴퓨터용 EHMACC와 EHPC 프로그램을, 마이크로-소프트 포트란을 이용하는 PC로 계산할 수 있도록 변환하였다. 이 프로그램을 이용하여 perovskit 구조의 $LaNiO_3$ 단위세포와 ($2{\times}2{\times}1$)으로 확장된 구조에 대한 띠 구조를 계산한 결과, ${\Gamma}{\rightarrow}H,\;H{\rightarrow}N$ 및 $N{\rightarrow}{\Gamma}$ 방향(2차원)에서는 bend gap이 0.35eV인 반도체의 성질을 나타내고, ${\Gamma}{\rightarrow}P$와 $P{\rightarrow}N$ 방향(3차원)에서는 금속성의 성질을 나타내었다. 또 이들 결정에 관한 DOS와 COOP를 고찰한바, $LaNiO_3$에서 산소원자의 DOS는 니켈원자의 결함보다는 산소원자의 위치에 영향을 받아 서로 다른 종류의 산소원자로 존재할수 있음을 알았다.

• Kyungpook Mathematical Journal
• /
• 제56권1호
• /
• pp.69-81
• /
• 2016

For a positive integer k, a k-rainbow dominating function of a digraph D is a function f from the vertex set V (D) to the set of all subsets of the set $\{1,2,{\ldots},k\}$ such that for any vertex $v{\in}V(D)$ with $f(v)={\emptyset}$ the condition ${\cup}_{u{\in}N^-(v)}$ $f(u)=\{1,2,{\ldots},k\}$ is fulfilled, where $N^-(v)$ is the set of in-neighbors of v. A set $\{f_1,f_2,{\ldots},f_d\}$ of k-rainbow dominating functions on D with the property that $\sum_{i=1}^{d}{\mid}f_i(v){\mid}{\leq}k$ for each $v{\in}V(D)$, is called a k-rainbow dominating family (of functions) on D. The maximum number of functions in a k-rainbow dominating family on D is the k-rainbow domatic number of D, denoted by $d_{rk}(D)$. In this paper we initiate the study of the k-rainbow domatic number in digraphs, and we present some bounds for $d_{rk}(D)$.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권5호
• /
• pp.220-229
• /
• 2004

We have examined a technique of one-dimensional (1D) fluid modeling for radio-frequency Ar capacitively coupled plasmas (CCP) between unequal-sized powered and grounded electrodes. In order to simulate a practical CCP reactor configuration with a grounded side wall by the 1D model, it has been assumed that the discharge space has a conic frustum shape; the grounded electrode is larger than the powered one and the discharge space expands with the distance from the powered electrode. In this paper, we focus on how much a 1D model can approximate a 2D model and evaluate their comparisons. The plasma density calculated by the 1D model has been compared with that by a two-dimensional (2D) fluid model, and a qualitative agreement between them has been obtained. In addition, 1D and 2D calculation results for another reactor configuration with equal-sized electrodes have also been presented together for comparison. In the discussion, four CCP models, which are 1D and 2D models with symmetric and asymmetric geometries, are compared with each other and the DC self-bias voltage has been focused on as a characteristic property that reflects the unequal electrode surface areas. Reactor configuration and experimental parameters, which the self-bias depends on, have been investigated to develop the ID modeling for reactor geometry with unequal-sized electrodes.

• 한국음향학회지
• /
• 제30권3호
• /
• pp.129-135
• /
• 2011

An algorithm is presented for estimating the 3-D location (i.e., azimuth angle, elevation angle, and range) of multiple sources with a uniform circular array (UCA) consisting of an even number of sensors. Recently the rank reduction (RARE) algorithm for partly-calibrated sensor arrays was developed. This algorithm is applicable to sensor arrays consisting of several identically oriented and calibrated linear subarrays. Assuming that a UCA consists of M sensors, it can be divided into M/2 identical linear subarrays composed of two facing sensors. Based on the structure of the subarrays, the steering vectors are decomposed into two parts: range-independent 2-D direction-of-arrival (DOA) parameters, and range-relevant 3-D location parameters. Using this property we can estimate range-independent 2-D DOAs by using the RARE algorithm. Once the 2-D DOAs are available, range estimation can be obtained for each source by defining the 1-D MUSIC spectrum. Despite its low computational complexity, the proposed algorithm can provide an estimation performance almost comparable to that of the 3-D MUSIC benchmark estimator.

• 한국통신학회논문지
• /
• 제23권9A호
• /
• pp.2365-2371
• /
• 1998

이산 여현 변환(Discrete Cosine Transform: DCT)은 음성 및 영상 신호의 압축에 광범위하게 응용되고 있다. 본 논문에서는 $2^{m}$-포인트의 일반적인 경우로 확장이 가능한 새로운 고속 DCT 알고리즘과 구조를 제안한다. 제안한 알고리즘은 커널의 대칭성을 이용하여 N-포인트의 DCT를 N/2-포인트의 DCT로 나누어 처리하며 이를 재귀적으로 적용해 나간다. 제안한 알고리즘은 적은 덧셈 및 곱셈 연산을 통해 변환을 수행하며, 변환을 위해 통과해야 하는 곱셈 연산단의 수가 적고 대부분의 곱셈 연산이 흐름도상의 후반부에서 일괄적으로 수행되므로 고정 소수점 연산시에 발생할 수 있는 오차의 전파를 줄일 수 있다.

• 한국재료학회지
• /
• 제31권7호
• /
• pp.397-402
• /
• 2021

In this study, binderless-WC, WC-6 wt%Co, WC-6wt% 1 and 2.5 B₄C materials are fabricated by spark plasma sintering process (SPS process). Each fabricated WC material is almost completely dense, with a relative density up to 99.5 % after the simultaneous application of pressure of 60 MPa. The WC added Co and Co-B₄C materials resulted in crystalline growth. The WC with HCP crystal structure has respective interfacial energy (basal facet direction: 1.07 ~ 1.34 J·m^-2, prismatic direction: 1.43 ~ 3.02 J·m^-2) that depends on the grain growth direction. It is confirmed that the continuous grain growth, biased by the basal facet, which has relatively low energy, is promoted at the WC/Co interface. As abnormal grain growth takes place, the grain size increases more than twice from 0.37 to 0.8 um. It is found through analysis that the hardness property also greatly decreases from about 2661.4 to 1721.4 kg/mm², along with the grain growth.