• Textile Coloration and Finishing
• /
• v.14 no.1
• /
• pp.43-50
• /
• 2002

Silk/Cotton fabrics were treated with butanetetracarboxylic acid(BTCA) to improve crease recovery and anti-shrinking properties at various curing temperatures and pH values. We investigated the effects of finishing conditions on add-on of BTCA, bending property(E, 2HB), wrinkle recovery angle, shrinkage, and dyeing properties. The Add-on of BTCA increased with increasing curing temperature and concentration. Crease recovery was improved with decreasing shrinkage. Maximum add-on of BTCA was showed at pH 2.5. In case of dyeing and mercerization, silk side treated with BTCA was more flexible than untreated, whereas cotton side was more stiff. In dyeing after mercerization, B and 2HB values were higher and K/S values were doubled nearly. The hand of fabric improved with decreasing B and 2HB by the BTCA treatment. BTCA treatment after reactive dyeing improved crease recovery, and caused no change of color difference. However, BTCA treatment after reactive dyeing didn't improve crease recovery, whereas B and 2HB were decreased considerably by the treatment.

• Journal of Integrative Natural Science
• /
• v.9 no.1
• /
• pp.72-79
• /
• 2016

Hexane, ethyl acetate and methanol extracts of whole plant of Boerhavia diffusa were screened for phytochemical and biological activities. Qualitative phytochemical screening via colorimetric method and the quantitative estimation of phenolic and flavonoid content were performed. Antioxidant assay using DPPH scavenging method was studied. Antimicrobial screening of plant extracts was done by cup diffusion technique. Cytotoxic activity of B. diffusa was studied by brine shrimp bioassay and anthelminthic activity was evaluated in vitro in Pheretima posthuma. This study revealed B. diffusa as a source of various phyto-constituents such as alkaloids, glycosides, saponins, tannins, carbohydrates, cardiac glycosides, flavonoids and terpenoids. Quantitative estimation of total phenol was found to be maximum in BEE i.e. $29.73{\pm}0.88$, BME $19.8{\pm}2.02$ and in BHE $9.15{\pm}0.304mgGAE/g$. Similarly, the total flavonoid content was found to be $17.44{\pm}0.75$ in BEE, $14.43{\pm}0.23$ in BHE and 3.678 mg QE/g in BME. Ethyl acetate extract showed its antibacterial activity against all tested pathogens except Escherichia coli whereas Staphylococcus aureus and Salmonella Typhi were resistant to methanol and hexane extract. The zone of inhibition (ZOI) of ethyl acetate extract against S. Typhi and B. cereus was found to be 18 mm and 14 mm respectively. The MIC value of BEE in S. Typhi was $3.125{\mu}g/ml$ and in B. cereus was $12.5{\mu}g/ml$. The preliminary screening of anticancer property of B. diffusa i.e. BSLT in methanol was found to be $165.19{\mu}g/ml$. B. diffusa was also found to contain anthelmintic property. The study helped in further exploration of medicinal properties of B. diffusa by phytochemical screening and biological activities paving the path for study and investigation in this plant.

• Honam Mathematical Journal
• /
• v.30 no.1
• /
• pp.147-164
• /
• 2008

In the setting of the half-plane of the complex plane, we show that for r > $-{\frac{1}{2}}$, the dual space of the weighted Bergman spaces $B^{1,r}$ is the Bloch space and we introduce some operators. We also study Toeplitz and Hankel operators and we find some characterization of Hankel operators.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.2
• /
• pp.21-27
• /
• 1994

Linear combination of weighted order statistic(LWOS) filters, which is an extension of stack filters, can represent any Boolean function(BF) or its extension. Which is called the extended BF(EBF). In this paper, we present a procedure for finding an LWOS filter of the simplest type from LWOS filters which are equivalent to a given BF or EBF. In addition, a property that is useful for implementing an LWOS filter is derived and an algorithm for LWOS filtering is presented.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.12
• /
• pp.100-107
• /
• 1994

This article describes the hardware design scheme of Hamming MAXNET algorithm which is appropriate for binary pattern classification with minimum HD measurement between stimulus vector and storage vector. Circuit integration is profitable to Hamming MAXNET because the structure of hamming network have a few connection nodes over the similar neuro-algorithms. Designed hardware is the two-layered structure composed of hamming network and MAXNET which enable the characteristics of low power consumption and fast operation with biline volgate sensing scheme. Proposed Hamming MAXNET hardware was designed as quantize-level converter for simulation, resulting in the expected binary pattern convergence property.

• Journal of Powder Materials
• /
• v.26 no.2
• /
• pp.156-165
• /
• 2019

Over the last decade, the next generation's ultra-high-temperature materials as an alternative to Nickel-based superalloys have been highlighted. Ultra-high-temperature materials based on refractory metals are one of several potential candidates. In particular, molybdenum alloys with small amounts of silicon and boron (Mo-Si-B alloys) have superior properties at high temperature. However, research related to Mo-Si-B alloys were mainly conducted by several developed countries but garnered little interest in Korea. Therefore, in this review paper, we introduce the development history of Mo-Si-B alloys briefly and discuss the properties, particularly the mechanical and oxidation properties of Mo-Si-B alloys. We also introduce the latest research trends of Mo-Si-B alloys based on the research paper. Finally, for domestic research related to this field, we explain why Mo-Si-B alloys should be developed and suggest the potential directions for Mo-Si-B alloys research.

• Progress in Superconductivity and Cryogenics
• /
• v.16 no.1
• /
• pp.9-13
• /
• 2014

Effects of neutron irradiation on the superconducting properties of the undoped $MgB_2$ and the carbon(C)-doped $MgB_2$ bulk superconductors, prepared by an in situ reaction process using Mg and B powder, were investigated. The prepared $MgB_2$ samples were neutron-irradiated at the neutron fluence of $10^{16}-10^{18}n/cm^2$ in a Hanaro nuclear reactor of KAERI involving both fast and thermal neutron. The magnetic moment-temperature (M-T) and magnetization-magnetic field (M-H) curves before/after irradiation were obtained using magnetic property measurement system (MPMS). The superconducting critical temperature ($T_c$) and transition width were estimated from the M-T curves and critical current density ($J_c$) was estimated from the M-H curves using a Bean's critical model. The $T_cs$ of the undoped $MgB_2$ and C-doped $MgB_2$ before irradiation were 36.9-37.0 K and 36.6-36.8 K, respectively. The $T_cs$ decreased to 33.2 K and 31.6 K, respectively after irradiation at neutron fluence of $7.16{\times}10^{17}n/cm^2$, and decreased to 22.6 K and 24.0 K, respectively, at $3.13{\times}10^{18}n/cm^2$. The $J_c$ cross-over was observed at the high magnetic field of 5.2 T for the undoped $MgB_2$ irradiated at $7.16{\times}10^{17}n/cm^2$. The $T_c$ and $J_c$ variation after the neutron irradiation at various neutron fluences were explained in terms of the defect formation in the superconducting matrix by neutron irradiation.

• Korean Journal of Mathematics
• /
• v.22 no.2
• /
• pp.279-288
• /
• 2014

The studies of reversible and 2-primal rings have done important roles in noncommutative ring theory. We in this note introduce the concept of quasi-reversible-over-prime-radical (simply, QRPR) as a generalization of the 2-primal ring property. A ring is called QRPR if ab = 0 for $a,b{\in}R$ implies that ab is contained in the prime radical. In this note we study the structure of QRPR rings and examine the QRPR property of several kinds of ring extensions which have roles in noncommutative ring theory.

• Journal of Power System Engineering
• /
• v.8 no.4
• /
• pp.44-48
• /
• 2004

For many years researchers have been attempting to establish the relations among the preparation history, structure and properties of ceramics. In this study, the strength property of $Al_2O_3$ ceramics with components and giudes of the textile machinery was investigated. The optimized conditions of ressureless sintering were investigated in order to obtain the maximum strength of $Al_2O_3$ ceramics for using at the textile machinery. As the sintering conditions, $1,400{\sim}1,700^{\circ}C$ of temperatures and $30{\sim}150$ minutes of times were applied. Three-point bending test was conducted on the sintered materials to obtain the strength property. From test results, the optimum sintering temperature has $1,600^{\circ}C$. And the optimum sintering time in $1,600^{\circ}C$ has about 100 minutes.

• Korean Journal of Materials Research
• /
• v.10 no.12
• /
• pp.838-844
• /
• 2000

For the fabrication of titanium diboride($TiB_2$)- based cermet as applications of cutting tools and wear resistant materials, a binder metal with good mechanical properties and sinterability is essential. In this study, SUS316L was chosen for the binder metal to obtain a new $TiB_2$ cermet with superior hardness and toughness.$TiB_2$-SUS316L cermets were densified to relative density of more than 99% by pressureless sintering at temperature above $1650^{\circ}C$ The flexural strength was up to 1290MPa at 10vo1%SUS316L cermet in spite of the formation of $Fe_2$B phase during the sintering. The fracture toughness was obtained up to $6MPam^{1/2}$ with Victors hardness over 18Gpa. These hardness and fracture toughness combinations are better than those of conventional cermet. The high temperature strength remarkably decreased by the plastic deformations of SUS316L binder phase at nearby $800^{\circ}C$ .