• 한국안전학회지
• /
• 제12권1호
• /
• pp.3-8
• /
• 1997

It is well known that mechanisms of fracture and fatigue crack propagation depend upon various characteristics such as environmental condition, crack geometry, heat treatment and mechanical properties. It seems to be important for the detailed evaluation of structural components which contain flaws. In this paper, it is studied that the fatigue crack propagation of partly heat treated medium carbon alloy steel(SCM440) by high frequency heat treatment.

• 한국안전학회지
• /
• 제8권1호
• /
• pp.13-20
• /
• 1993

It is well known that mechanisms of fracture and fatigue crack propagation depend upon various characteristics such as environmental condition. crack geometry. heat treatment and mechanical properties. It seems to be important for the detailed evaluation of structural integrity to investigate the effects of the above factors on the behavior of structural components which contain flaws. In this paper. it is studied that the fatigue crack propagation of partly heat treated medium carbon steel (SM45C) by high frequency heat treatment.

• 한국항공운항학회지
• /
• 제15권2호
• /
• pp.1-8
• /
• 2007

In this research, algorithm and software for the medium frequency signal analysis of DGPS(Differential Global Positioning System) station were developed. Based on new MF(Medium Frequency) algorithm, the software of NDGPS(National DGPS) signal analysis was developed for coverage analysis. Predicted MF propagation data from this software was compared to the measurement data for the verification of a developed MF algorithm. GIS(Geographic Information System) techniques including digital map with elevation data were used because MF propagation is closely related to ground conductivity, mountains, building intensity.

• 대한기계학회논문집A
• /
• 제32권3호
• /
• pp.267-273
• /
• 2008

The circular cylinder pipes are used in the many industrial areas. In this paper, the acoustic wave propagation in the pipe containing a gas is researched. First of all, the theory for the coupled acoustic wave propagation in a pipe is investigated. Acoustic wave propagation in pipe can not be occurred independently between the wave of the fluid and the shell. It requires complicated analysis. However, as a special case, the coupled wave in a high density pipe containing a light density medium is corresponded closely to the uncoupled in-vacuo shell waves and to the rigid-walled duct fluid waves. The coincidence frequencies of acoustic and shell modes contribute to the predominant energy transmission. The coincidence frequency means the frequency corresponding to the coincidence of the wavenumber in both acoustic and shell. In this paper, it is assumed that the internal medium is much lighter than the pipe shell. After the uncoupled acoustic wave in the internal medium and uncoupled shell wave are considered, the coincidence frequencies are found. The analysis is successfully confirmed by the verification of the experiment using the real long steel pipe. This work verifies that the coupled wave characteristic of the shell and the fluid is occurred as predominant energy transmission at the coincidence frequencies.

• Structural Engineering and Mechanics
• /
• 제53권2호
• /
• pp.277-296
• /
• 2015

The objective of this paper is to investigate the surface waves in fibre-reinforced anisotropic thermoelastic medium subjected to gravity field. The theory of generalized surface waves has firstly developed and then it has been employed to investigate particular cases of waves, viz., Stoneley waves, Rayleigh waves and Love waves. The analytical expressions for displacement components, force stress and temperature distribution are obtained in the physical domain by using the harmonic vibrations. The wave velocity equations have been obtained in different cases. The numerical results are given and presented graphically in Green-Lindsay and Lord-Shulman theory of thermoelasticity. Comparison was made with the results obtained in the presence and absence of gravity, anisotropy, relaxation times and parameters for fibrereinforced of the material medium. The results indicate that the effect of gravity, anisotropy, relaxation times and parameters for fibre-reinforced of the material medium are very pronounced.

• Geomechanics and Engineering
• /
• 제16권2호
• /
• pp.169-176
• /
• 2018

An attempt has been made here to study the propagation of SH-type surface waves in an elastic medium, which is initially stressed and heterogeneous and has a point source inside the medium. The upper portion of the composite medium is a sandy layer. It is situated on an initially stressed heterogeneous half-space, whose density, rigidity and internal friction are function of depth. The analysis has been carried out by using Fourier transform and Green's function approach. The phase velocity has been investigated for several particular situations. It has been shown that the results of the study agree with those the case of Love wave propagation in a homogeneous medium in the absence of the sandy layer, when the initial stress is absent. In order to illustrate the validity of the analysis presented here, the derived analytical expression has been computed numerically, by considering an illustrative example and the variances of the concerned physical variables have been presented graphically. It is observed that the velocity of shear wave is amply influenced by the initial stress and heterogeneity parameters and the presence of the sandy layer. The study has an important bearing on investigations of different problems in the earth's interior and also in seismological studies.

• Journal of Plant Biotechnology
• /
• 제7권3호
• /
• pp.175-181
• /
• 2005

This work described some essential factors necessary for micro-propagation of banana for mass production of synthetic seeds for germ plasm conservation, and how peroxides activity of conserved tissue was influenced. Shoot tips of field grown plants were used to obtain shoot clusters on shoot proliferation medium (MS medium supplemented with 5 mg/l BAP). Using longitudinally-split shoot tip technique, 18720, 8640, 7488, 2016 plantlets were obtained from one shoot tip of Maghraby, Grand Naine, Balady, and Williams, respectively, in six subculture, one month each, on solid medium. Shoot tips excised from in vitro grown plantlets were encapsulated in calcium-alginate beads and stored at $4^{\circ}C$ for one month on half-strength MS basal medium without growth regulators or sugars. After one month all the viable-conserved synseeds formed shoots when they were transferred to MS basal medium, some of them showed synchronous formation of shoot and root systems in one week. Plants retrieved from encapsulated shoot tips were hardened off and transferred to soil.

• 대한전자공학회논문지
• /
• 제19권6호
• /
• pp.17-32
• /
• 1982

집적광학용 광도파전에 전기팡 효파 혹은 자기광 효과를 나타내는 이방성 매질을 사용할 때 매질정수 및 박막두께등 광학적 변수가 모드 변환에 미치는 영향괼 엄밀한 파동광학의 접근 방법으로 조사하여 어떠한 박막형 광도파관 구조에도 적용될 수 있는 일반적인 해석방법을 제시하였다. 균일한 이방성 매질에서의 고유 모드와 그 구성성분 및 위상속도를 먼저 결정하고 그 결과를 이용하여 박자형 광도파관에서의 고유 모드 성분에 대한 위상특성식을 구하였고 전자파의 진행방향에 대한 모드 성분의 변화를 Jones 행열 령태로 표시하여 박막형 광도파관에서 모드 젼환의 조건과 그 변환율이 Bulk 매질에서와는 다름을 나타내었다. Wave propagation in gyrotropic or anisotropic medium is analyzed in terms of the eigenmodes of the medium, which are admixture of TE and TM waves. The field composition and the phase velocity of the modes are also determined. The results of the analysis are applied to thin film optical waveguide using such medium as substrate and/or film. Based on the characteristic equations for phase constants of the waveguide, the condition for TE-TM mode convection is derived, and wave propagation in the guide is represented in the form of Jones matrix, which allows a new interpretation in the conversion efficiency of the thin-film optical waveguides.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2019년도 추계학술대회
• /
• pp.15-15
• /
• 2019

The walnut (Juglans regia L.), a member of the Juglandaceae, is native to the mountain ranges of central Asia. This species of walnut is valued commercially for its nuts and in some areas for its timber. The seeds of walnut are recalcitrant and it has strong integument dormancy and their germination is irregular, making its natural propagation difficult. Low percentage of seed germination and long propagation cycle are the main problems of propagation. This study was conducted medium composition on in vitro plantlet regeneration from axillary buds of walnut. It has proved to be the most generally applicable and reliable method of in vitro propagation. Micropropagation culture that axillary buds are excised aseptically enables faster multiplication of plants. The axillary buds of walnut new cultivar "Sinlyeong" were cultured on two basal media which contained the different plant growth regulators depending on the respective shooting and rooting stage. After 12 weeks, the shoot generation rate was 85.3%, the shoot number and its length were 1.9/explant and 2.7 cm in the most favorable medium composition. The percentage of rooting was 25.4%. From these results, it was found the optimum basal medium and plant growth regulator for in vitro plant regeneration from axillary buds of walnut new cultivar "Sinlyeong". However, we have continued to search the other medium additives to enhance the rate of walnut root.

• Journal of Forest and Environmental Science
• /
• 제34권1호
• /
• pp.50-52
• /
• 2018

The effect of basal nutrients concentrations and exogenous auxin for root induction from leaves of Sedum takesimense were investigated for mass-propagation. Root induction rates were significantly different from the concentrations of basal salts but not influenced by supplemented IBA in the medium. The lowest concentration of MS basal salts (1/10) was most effective to induce roots from leaves followed 1/5 MS, and 1/2 and full strength MS medium. Supplement of IBA $10{\mu}M$ in the medium did not improve the root induction that resulted no differences compare to the hormone free media. Rooted leaves were transplanted in soil and survived in greenhouse.