• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2001.05a
• /
• pp.77-83
• /
• 2001

In recent years, the AES in North America and the NESSIE project in Europe have been in progress. Six proposals have been submitted to the NESSIE project including the LILI-128 by Simpson in Australia in the synchronous stream cipher category. These proposals tend towards a design with parallelism of the algorithms in order to facilitate speed-up. In this paper, we consider the PS-LFSR and propose the effective implementation of various nonlinear combiners: memoryless-nonlinear combiner, memory-nonlinear combiner, nonlinear filter function, and clock-controlled function. Finally, we propose m-parallel SUM-BSG and LILI-l28's parallel implementation as examples, and we determine their securities and performances.

• The Journal of Korea Robotics Society
• /
• v.9 no.1
• /
• pp.48-56
• /
• 2014

In robotic surgery, a surgeon checks only a surgical site of patient in the progress of surgery by vision and sound information. In order to solve this limited information, the haptic function is necessary. And haptic surgical robot is also necessary to design a haptic master device. The master device for laparoscope operation with cable-conduit was developed in previous research to give haptic function. It suggested a possibility of developing a master device by using the cable-conduit. However, it is very inconvenient to use. Therefore, this paper suggests a new mechanism design structure to solve the problems of the previous work by new forming a new master device. And it has proved that it's usability is better than previous one. Furthermore it has also experimented and analyzed that a backlash of new master device is compensated by smooth backlash inverse algorithm.

• Progress in Superconductivity and Cryogenics
• /
• v.21 no.4
• /
• pp.59-63
• /
• 2019

To reduce the fault current below the current capacity of a circuit breaker, researches on HTS (High Temperature Superconductor) power cables with fault current limiting (FCL) function are increasing. An FCL HTS power cable transports current with low a impedance during normal operation. Yet, it limits the fault current by an increased inductive or resistive impedance of conducting layer when quench occurs at the FCL HTS power cable by the large fault current. An inductive type FCL HTS power cable uses increased inductive impendence caused by leakage magnetic flux outside the cable core when the quench occurs at a shield layer losing the magnetic shielding effect. Therefore, it has an advantage of less resistive heating than resistive type FCL HTS power cable and temperature increase is suppressed. This paper describes an ideal circuit model for the FCL HTS power cable to investigate the effectiveness of increased inductive impedance when quench occurs at the shield layer. Then, FEM analysis is presented with a simplified model cable composed of various iron yokes to investigate the effect of the shape of yoke on the generation of the inductive impedance.

• Journal of Korean Institute of Industrial Engineers
• /
• v.1 no.2
• /
• pp.27-38
• /
• 1975

This paper explores a quantitative decision-making system for planning production, inventories and work-force in a multi-item production system. The Multi-item Parametric Decision Rule (MPDR) model, which assumes the existence of two types of linear feed-back rules, one for work-force level and one for production rates, is basically an extension of the existing method of Parametric Production Planning (PPP) proposed by C.H. Jones. The MPDR model, however, explicitly considers the effect of manufacturing progress and other factors such as employee turn-over, difference in work-days between month etc., and it also provides decision rules for production rates of individual items. First, the cost relations of the production system are estimated in terms of mathematical functions, and then decision rules for work-force level and production rates of individual items are establised based upon the estimated objective cost function. Finally, a direct search technique is used to find a set of parameters which minimizes the total cost of the objective function over a specified planning horizon, given estimates of future demands and initial values of inventories and work-force level. As a case problem, a hypothetical decision rule is developed for a particular firm (truck assembly factory).

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.2
• /
• pp.37-43
• /
• 2009

In this study, multi-channel digital hearing aid algorithm for low power system is proposed. First, MDCT(Modified Discrete Cosine Transform) method converts time domain of input speech signal into frequency domain of it. Output signal from MDCT makes a group about each channel, and then each channel signal adjusts a gain using LCF(Loudness Compensation Function) table depending on hearing loss of an auditory person. Finally, compensation signal is composed by TDAC and IMDCT. Its all of process make progress 16-bit fixed-point operation. We use fast-MDCT instead of MDCT for reducing system complexity and previously computed tables instead of log computation for estimating a gain. This algorithm evaluate through computer simulation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.125-127
• /
• 2012

With the progress of electronics and radio communication technology, human enjoys greater freedom in communication. However, EMW (Electro-Magnetic wave) environments have became complicate and more difficult to control. Thus, international organizations, such as the American National Standard Institution (ANSI), Federal Communications Commission (FCC), the Comite Internationale Special des Perturbations Radio electrique (CISPR), etc, have provided standard for controlling the EM wave environments and for the countermeasure of the electromagnetic compatibility (EMC). In this paper, the status of EMW absorber and the goal of smart EMW absorber ifor the future were described. Furthermore, design method of the smart EM wave Absorber with heat radiating function was suggested. The designed smart EM wave Absorber has the absoption ability of more than 5 dB from 2 GHz to 2.45 GHz band, one optimum aperture (hole) size of which was 6 mm, 9 mm in adjacent hole space, and 6.5 mm in thickness, respectivly. Thus, it is repected that these results can be applied to various EMC devices in electronic, communication, and controlling systems.

• Korean Journal of Organic Agriculture
• /
• v.22 no.4
• /
• pp.561-579
• /
• 2014

This research estimates the necessity of a better governance plan on the purpose of fulfillment energy recovery by building resource recycling system for biomass resources and waste resources that derive from agricultural and mountain village areas. The utilization of new renewable energy technology which uses waste and biomass sources diverse as variety of resources, collecting method, operator etc. and is structurally complicated the formation of policy is also very difficult. There is failure because of the problems which occurs from the policy led by government. Biomass Town Development Project should be made through the central government and the local government integrated support system and should be formed a consultative group in order to process the project mutually with these two department including the experts from the related areas. This consultative group, while government organizations carry out the hub function of strategic knowledge management, should carry out the control tower function to be able to be net working transfer the information with the cooperation of private and government so vitalize the communication area among the related actors. And to be able to increase the participation rate of the local people the consistent and various educations should be given so a smooth business promotion progress will be desired through the change of perception and coactive participation of people.

• Journal of mucopolysaccharidosis and rare diseases
• /
• v.3 no.2
• /
• pp.41-43
• /
• 2017

Prader-Willi syndrome (PWS) is a genetic disorder that is considered, especially on child, to cause poor feeding, hypotonia, failure to thrive, developmental delay and hypogonadism which is known to affect between 1 in 10,000 and 30,000 people. The children with PWS are viewed as affected by growth hormone (GH) insufficiency, although the exact mechanisms of GH deficiency are not fully understood. However, the benefits of GH treatment in children with PWS are well established. Myers, et al. (2006), Grugni, et al. (2016) indicated its positive effects on linear growth, body composition, motor function, respiratory function and psychomotor development. Despite of its effectiveness and advantages had been well known and proven in many other studies, there is only one recombinant GH product that is approved for PWS in Korea, $Genotropin^{(R)}$, till now. A phase III clinical study of GH treatment with $Eutropin^{TM}$, in 34 Korean PWS children is in progress, which is expected to have comparable effects and safety profile with the active control by assessing auxological changes such as height standard deviation score, body composition changes such as lean body mass and percent body fat, motor and cognitive development using Bayley scale, and safety profiles.

• Physical Therapy Rehabilitation Science
• /
• v.10 no.4
• /
• pp.493-502
• /
• 2021

Objective: Older adults with mild cognitive impairment (MCI) are more likely to progress to dementia. Motor-cognitive training is applied as a dual-task to improve the cognitive and physical functions of older adults with MCI. The purpose of the study was to know the recent trends in motor training types and outcome measures used for motor-cognitive training in older adults with MCI. Design: Aliterature review Methods: This literature review was conducted in Pubmed, MEDLINE® and Google Scholar with the following key words: older adults, mild cognitive impairment, motor-cognitive training, cognition, and dual-task. The 7 studies were found with the search tool and all studies were randomized controlled trials. Results: In motor-cognitive training in older adults with MCI, 6 studies applied aerobic exercise. And 3 out of 6 studies also applied strengthening exercises. One study applied dual tasks without aerobic exercise. In the 6 studies, overall cognitive and executive function were used as outcome measures, and physical function was evaluated as gait performance. Memory and physical frailty were also used as measurement tools. As a result of all studies, when motor-cognitive training was applied, cognition and physical performance showed significant results. Conclusions: A recent five-year study applied mainly aerobic exercise and strength training to older adults with MCI and found it to improve cognitive and physical performance.

• Food Engineering Progress
• /
• v.21 no.3
• /
• pp.256-266
• /
• 2017

This study was designed to optimize ethanol extraction process of unfertilized corn silk (UCS) to maximize phytochemical contents and bioactivities. The response surface methodology (RSM) with central composite design (CCD) was employed to obtain the optimal extraction conditions. The influence of ethanol concentration, extraction temperature and extraction time on total polyphenol contents, total flavonoid contents, maysin contents, 2,2-diphenyl-1-picrylhydrazyl(DPPH) radical scavenging activities and tyrosinase inhibition were analyzed. For all dependable variables, the most significant factor was ethanol concentration followed by extraction temperature and extraction time. The following optimum conditions were determined by simultaneous optimization of several responses with the Derringer's desirability function using the numerical optimization function of the Design-Expert program: ethanol concentration 80.45%, extraction temperature $53.49^{\circ}C$, and extraction time 4.95 h. Under these conditions, the predicted values of total polyphenol contents, total flavonoid contents, maysin contents, DPPH radical scavenging activity and tyrosinase inhibition were $2758.74{\mu}g\;GAE/g$ dried sample, $1520.81{\mu}g\;QUE/g$ dried sample, 810.26 mg/100g dried sample, 56.86% and 43.49%, respectively, and the overall desirability (D) was 0.74.